New Technologies

• 

• • NXP Launches Comprehensive RF Power Multi-Chip Module Portfolio

    NXP Semiconductors has announced that its comprehensive RF Power Multi-Chip Module (MCM) portfolio will be available worldwide to support the development of large-scale MIMO active antenna systems for 5G base stations.

  • Published time: 2019-10-16 Details ›

• 

• • Introduction to five correction methods for PCB backplane deformation

    For pcb copy board, a slight carelessness may cause deformation of the bottom plate. If it is not improved, it will affect the quality and performance of the pcb copy board. If it is directly discarded, it will cause cost loss. Here are a few ways to correct t...

  • Published time: 2019-10-16 Details ›

• 

• • What are the PCB interconnection methods?

    Electronic components and electromechanical components have electrical contacts, and the electrical connection between two discrete contacts is called interconnection. Electronic devices must be interconnected in accordance with the circuit schematic to achiev...

  • Published time: 2019-10-15 Details ›

• 

• • How to choose the right sensor

    When using test and measurement equipment in peacetime, due to the direct voltage of the test and measurement equipment, the current input value is limited. In the test, the sensor is often used, and the choice of the sensor becomes the primary problem.

  • Published time: 2019-10-15 Details ›

• 

• • Circuit board general troubleshooting method

    How to deal with when the board fails, this article analyzes from several aspects. Please read the article carefully and you will find the right answer.

  • Published time: 2019-10-14 Details ›

• 

• • How to discharge the capacitor is the safest

    High-voltage large-capacity capacitors generally need to be discharged with high-power resistors, while low-power high-voltage capacitors or other small-power capacitors, discharge, generally use small power resistors for safer and more thorough discharge.

  • Published time: 2019-10-14 Details ›

• 

• • Large scale integrated circuit classification

    Today, the world's ultra-large-scale integrated circuit (IC) is called IC, and Taiwan is mainly called fab. It is mainly distributed in a few developed countries and regions such as the United States, Japan, Western Europe, Singapore and Taiwan.

  • Published time: 2019-10-12 Details ›

• 

• • What is the purpose of cleaning PCB printed circuit board components?

    PCB fabrication and storage, component fabrication and storage, and various contaminants formed during component assembly process can have a significant impact on the quality and reliability of printed circuit board assemblies, and even cause circuit failure a...

  • Published time: 2019-10-12 Details ›

• 

• • The inductance and capacitor in series

    The basic function of two components in the circuit: the basic function of the inductor is "straight blocking", that is, the DC can pass smoothly, but the AC signal is not so convenient. The higher the frequency of the AC signal, the ability of the inductor to...

  • Published time: 2019-10-12 Details ›

• 

• • How to store PCB boards? What are the methods?

    The PCB board is a carrier for electrical connection of electronic components and plays an important role. After the PCB board is processed, the PCB board needs to be stored to avoid damage to the already processed PCB board. So how many storage methods are th...

  • Published time: 2019-10-11 Details ›