Introducing to TPD1E10B06DPYR features, TPD1E10B06DPYR application,datasheet
Published time: 2019-12-20 18:07:04
This week, Jotrin Electronics' advantage inventory model, TPD1E10B06DPYR, we will focus on telling you everything about it.
The description of TPD1E10B06DPYR
TPD1E10B06DPYR is classified as Circuit Protection,belongs to TVS Diodes.
TPD1E10B06DPYR max Reverse Standoff Voltage is 5.5V ,Min Breakdown Voltage is 6V,Peak Pulse Current is 5A,Peak Pulse Power is 90W,Operating Temperature range is -40°C ~ 125°C,It is Surface Mount Type, using Cut Tape Package.TPD1E10B06DPYR is TI TPD1E10B06 series of electronic components.
The overview of TPD1E10B06 series
The TPD1E10B06 is a single-channel ESD TVS diode in a small 0402 package. This TVS protection product offers ±30-kV IEC air-gap, ±30-kV contact ESD protection, and has an ESD clamp circuit with a back-to-back TVS diode for bipolar or bidirectional signal support.
The 12-pF line capacitance of this ESD protection diode is suitable for a wide range of applications supporting data rates up to 400 Mbps.
The 0402 package is an industry standard and is convenient for component placement in space-saving applications.
Typical application of this ESD protection product is the circuit protection for audio lines (microphone,earphone, and speakerphone), SD interfacing, keypad or other buttons, VBUS pin and ID pin of USB ports,and general-purpose I/O ports.
A transient voltage suppressor or TVS is a general classification of an array of devices that are designed to react to sudden or momentary overvoltage conditions. One such common device used for this purpose is known as the transient voltage suppression diode that is simply a Zener diode designed to protect electronics device against overvoltages.
The characteristic of a TVS requires that it respond to overvoltages faster than other common overvoltage protection components such as varistors or gas discharge tubes. This makes TVS devices or components useful for protection against very fast and often damaging voltage spikes. These fast overvoltage spikes are present on all distribution networks and can be caused by either internal or external events, such as lightning or motor arcing.
The overview of TPD1E10B06DPYR manufacturer
Texas Instruments is the manufacturer of TPD1E10B06DPYR.
TI is a global semiconductor company, TI innovates through design, sales and manufacturing operations in more than 30 countries.
Texas Instruments is the leader of the analog and digital semiconductor IC, which headquarters is located in the USA. They are engaging in designing and manufacturing semiconductor ICs.
For more information about TI, please see the link at the end of the article.
TPD1E10B06DPYR features1.Provides System-Level ESD Protection for Low-Voltage I/O Interface
2.IEC 61000-4-2 Level 4 ESD Protection
2.1 ±30 kV Contact Discharge
2.2 ±30 kV Air-Gap Discharge
3.IEC 61000-4-5 Surge: 6 A (8/20 µs)
4.I/O Capacitance 12 pF (Typical)
5.RDYN 0.4 Ω (Typical)
6.DC Breakdown Voltage ±6 V (Minimum)
Feature DescriptionTPD1E10B06 is a bidirectional TVS with high ESD protection level. This device protects circuit from ESD strikes up to ±30-kV contact and ±30-kV air-gap specified in the IEC 61000-4-2 level 4 international standard.
The device can also handle up to 6-A surge current (IEC61000-4-5 8/20µs). The I/O capacitance of 12 pF supports a data rate up to 400 Mbps.
This clamping device has a small dynamic resistance of 0.4 Ω typically, which makes the clamping voltage low when the device is actively protecting other circuits. For example, the clamping voltage is only 10 V when the device is taking 1-A transient current.
The breakdown is bidirectional so that this protection device is a good fit for GPIO and especially audio lines which carry bidirectional signals. Low leakage allows the diode to conserve power when working below the VRWM. The industrial temperature range of –40°C to 125°C makes this ESD device work at extensive temperatures in most environments. The space-saving 0402 package can fit into small electronic devices like mobile equipment and wearables.
• End Equipment:
– Remote Controllers
– Set-Top Boxes
– Electronic Point of Sale (EPOS)
– Audio Lines
– General-Purpose Input/Output (GPIO)
TPD1E10B06DPYR Pin Configuration
Design resources for you:
Power Switch Hi Side 4-OUT 0A 1Ohm Autom >
TPS22968NEVM 5.5V, 4A, Dual Channel Load >
Power Driver ICs EP Dual 4A MOSFET Drive >
Clock Synthesizer / Jitter Cleaner Fract >
6-Channel Serial/Parallel Low-Side Pre-F >
Digital Signal Controller, TMS320F28xx S >
Floating-Point Digital Signal Processors >
Het assembler/simulator >
LOW-VOLTAGE ADJUSTABLE PRECISION SHUNT R >
Low Dropout Regulators - LDO 150mA LDO R >