The ACS720 of Current sensor IC with function that dual fault user settable
Published time: 2019-12-20 10:00:21
The ACS720 can also be found on the Jotrin Electronic Limited's official website by searching for similar products of the brand distributor. Jotrin Electronic Limited has always been committed to discovering high-quality electronic components and products for customers and providing customers with integrated procurement and supply facilities service. The following introduction to the product, The ACS720, mainly explains some of the features and application scenarios of the product. It also briefly explains the packaging of the product. Through this article, you can learn some basic understanding of the product.
Allegro MicroSystems Europe has introduced a high accuracy Hall-effect-based current sensor IC with multiple programmable fault levels intended for industrial and consumer applications with a focus on motor control and power inverter stage applications. One of the key benefits of Allegro’s ACS720 is to provide high isolation with a reduced bill of materials made possible by the proprietary IC SOIC-16W package.The ACS720 works off a single 5 V supply while maintaining an output voltage swing from 0 to 3 V, with a stable zero current output of 1.5 V. This allows the ACS720 to operate off a 5 V supply while having an output which is compatible with typical 3.3 V ADCs found on many MCUs.
Furthermore, the ACS720’s high PSRR rejects the noise often found on the supplies in the power section of the PCB or system, maintaining high accuracy in noisy environments.
The device has dual fault functions that are user configurable. Fast and slow fault output allow for short-circuit and overcurrent fault detection. A user-created resistor divider from the power supply of the ACS720 is used to set the fault level.
The fault outputs are open drain, allowing the user to pull them up to a compatible voltage for the MCU. The open-drain outputs also allow for implementing a simple logical OR of multiple sensor fault outputs. The ACS720 also integrates differential current sensing, which rejects external magnetic fields, greatly simplifying board layout in three-phase motor applications.
Near closed-loop accuracy is achieved in this open-loop sensor IC due to Allegro’s patented, digital temperature compensation, ultimately offering a smaller and more economical solution for many current sensing applications that traditionally rely on closed-loop core based sensors.
The ACS720 is provided in a small surface-mount SOIC16 package. The leadframe is plated with 100% matt tin, which is compatible with standard lead (Pb) free printed circuit board assembly processes.
Internally, the device is Pb-free, except for flip-chip high-temperature Pb based solder balls, currently exempt from RoHS. The device is fully calibrated prior to shipment from the factory.Tag: sensor IC，Jotrin
Hall Effect Sensor 5V Automotive 4-Pin S >
IC REG BCK ADJ 2.5A SYNC 16TSSOP >
LED DRVR 5V/9V/12V/15V/18V/24V >
ST72101/ST72212/ST72213 - 8-BIT MCU WITH >
DRIVER IC, Supply Voltage Min:-, Supply >
- A6812EEPT A1172ECGLT A1104EU-T