Power Monitoring IC measures AC power in real-time.
Published time: 2020-01-13 14:39:12
MCP39F501 power monitoring device offers complete, power monitoring functionality solutions for consumer, commercial and industrial products
This device is a highly integrated, single-phase power-monitoring IC designed for real-time measurement of AC power. It includes two 24-bit delta-sigma ADCs, a 16-bit calculation engine, EEPROM and a flexible two-wire interface. An integrated low-drift voltage reference in addition to 94.5 dB of SINAD performance on each measurement channel allows accurate designs with just 0.1% error across a 4000:1 dynamic range.
The MCP39F501 power monitoring IC allows designers to add power monitoring to their applications with minimal firmware development. Its performance enables designs capable of 0.1% error over a wider dynamic range and superior light load measurement versus current competing solutions. In an effort to improve power management schemes in power-hungry applications, such as data centres, lighting and heating systems, industrial equipment and consumer appliances, power-system designers are driving the need for enhanced power monitoring solutions. This includes requirements for better accuracy across current loads, additional power calculations and event monitoring of various power conditions. The built-in calculations include active, reactive and apparent power, RMS current and RMS voltage, line frequency, power factor as well as programmable event notifications.
The MCP39F501 device enables high-performance, cost-effective designs in the commercial (e.g. server and networking power supplies, power distribution units, lighting systems); consumer (e.g. appliance and smart plugs); and industrial markets (e.g. power meters and industrial equipment), among others. Additionally, the wide operating temperature range from -40°C to +125°C allows the MCP39F501 to be utilised in more extreme environments, such as industrial machinery applications.
"Government regulations, technology innovations and end customer expectations are driving the need for better power monitoring solutions in consumer, commercial and industrial products," said Bryan J. Liddiard, marketing vice president of Microchip's Analog and Interface Products Division.
"The MCP39F501 will allow our customers to add advanced power monitoring capabilities to their applications with nominal effort."
The MCP39F501 is available now for sampling and volume production in 28-lead QFN 5 mm x 5 mm packages. It is supplied in 5,000-unit quantities.
About Microchip Technology
Microchip Technology Inc. (NASDAQ: MCHP) is a leading provider of microcontroller, mixed-signal analog, and Flash-IP solutions, providing low-risk product development, lower total system cost and faster time to market for thousands of diverse customer applications worldwide. Headquartered in Chandler, Arizona, Microchip offers outstanding technical support along with dependable delivery and quality.
IC REG LINEAR 1.2V 300MA 4UQFN >
IC VOLT DETECTOR TO-92-3 >
IC DIVIDER /4 5V/3.3V 8-SOIC >
Clock Generator 0.001MHz to 1.25GHz Inpu >
MEMS OSC XO 307.0000KHZ CMOS SMD >
Clock Fanout Buffer 8Out 1IN 1:8 32Pin Q >
32Bit MCU FPU 512KB Flash 128KB RAM 200M >
18/20/28-Pin Flash Microcontrollers with >
MCU 8-bit PIC RISC 28KB Flash 3.3V/5V 28 >
MEMS OSC PROG BLANK 1MHZ-100MHZ >
MCU 32-bit ARM Cortex M7 RISC 2MB Flash >
32K 4KX8 2.5V SER EE IND >
MCU 32Bit SAM9G ARM926EJ-S RISC 64KB ROM >
Ic current monitor 44mv 8-dip >
8-bit Microcontroller 8 Kbytes ROM/OTP, >
- MIC23450-AAAYML TR