ON Semiconductor NCP109x PoE-PD Interface Controller
Update Time: 2019-12-20 15:01:25
ON Semiconductor NCP109x PoE-PD interface controllers are members of the high power HIPOTM PoE-PD product family and integrate an IEEE 802.3af PoE-PD interface controller. The NCP109xx family provides detection, classification, under voltage lockout, inrush and operational current limit, and more. The ON Semiconductor NCP1091 offers programmable undervoltage while the NCP1092 provides an auxiliary pin for applications supporting auxiliary supplies. The NCP109x PoE-PD interface controller is ideal for a variety of applications, including wireless access points, VOIP products, and IP camera.
The Type of ON Semiconductor NCP109x ：NCP1090, NCP1091,NCP1092 Integrated IEEE 802.3af PoE-PD Interface Controller
The NCP1090, NCP1091 and NCP1092 are members of ON Semiconductor’s high power HIPO Power over Ethernet Powered Device (PoE−PD) product family and integrate an IEEE 802.3af PoE−PD interface controller.
The 3 variants all incorporate the required functions as such detection, classification, under voltage lockout, inrush and operational current limit. A power good signal has been added to guarantee a good enabling/disabling of the DC−DC controller.
In addition, theNCP1091 offers a programmable under−voltage while the NCP1092 provide an auxiliary pin for applications supporting auxiliary supplies.The NCP1090, NCP1091 and NCP1092 are fabricated in a robust high voltage
process and integrates a rugged vertical N−channel DMOS suitable for the most demanding environments and capable of withstanding harsh environments such as hot swap and cable ESD events.
The NCP1090, NCP1091 and NCP1092 complement ON Semiconductor’s ASSP portfolio in industrial devices and can be combined with stepper motor drivers, CAN bus drivers and other high−voltage interfacing devices to offer complete solutions to the industrial and security market.
The main common feature
• Fully Supports IEEE 802.3af Specifications
• Programmable Classification Current
• Adjustable Under Voltage Lock Out (NCP1091 Only)
• Open−Drain Power Good Indicator
• 130 mA Inrush Current Limit
• 500 mA Operational Current Limit
• Pass Switch Disabling Input for Rear Auxiliary Supply Operation
• Over−temperature Protection
• Industrial Temperature Range −40°C to 85°C with Full Operation up
to 125°C Junction Temperature
• 0.5 Hot−swap Pass−switch
• Vertical N−channel DMOS Pass−switch Offers the Robustness of
The use of Attention
NCP1090, NCP1091, NCP1092 Recommended Operating Conditions Operating conditions define the limits for functional operation and parametric characteristics of the device.
Note that thefunctionality of the device outside the operating conditions described in this section is not warranted. Operating outside the recommended operating conditions for extended periods of time may affect device reliability
The NCP1090/91/92 include a thermal shutdown which protect the device in case of high junction temperature. Once the thermal shutdown (TSD) threshold is exceeded, the classification block, the pass switch and the PGOOD indicator are disabled. The NCP109X returns automatically to normal operation once the die temperature has fallen below the TSD low limit.
Datasheet download address
The Related products of ON Semiconductor link: you can learn about the Input Voltage ,Maximum Supply Current, Maximum Operating Temperature, Mounting Style Package / Case,Minimum Operating Temperature Packaging.
TRENCH 6 30V NCH >
LVDS Receiver 400Mbps Automotive 5-Pin S >
Optocoupler; SMD; Channels:1; Out: logic >
Trans MOSFET N-CH 40V 31A 5-Pin(4+Tab) S >
Diode Schottky 40V 1A 2-Pin SMA T/R >
Transistor Silicon Plastic PNP; Package: >
Low Capacitance SC-88 Diode-TVS Array fo >
Power MOSFET −60 V, −2.9 A, >
PNP 100 V 3 A 2.1 W Surface Mount Low VC >
Constant Current LED Driver, 223-Pin SO >
AND Gate 4-Element 2-IN CMOS Automotive >
Voltage Level Translator, 1 Input, 3.3 n >
Dual SPST Analog Switch, Low Voltage, Si >
Single Input Buffer,Buffers & Line Drive >
Programmable Precision Reference; Packag >