FTDI Chip releases full SuperSpeed USB3.0 Product Set
Update Time: 2019-12-20 14:19:27
FTDI Chip is pleased to announce the full production release and availability of its FT60x series, a sophisticated USB3.0 to FIFO bridge in a choice of low count pin packages. In addition, four corresponding development modules are now available. The FT600 and FT601 are FTDI Chip's first generation USB3.0 products that function as SuperSpeed USB3.0 to FIFO bridges, providing data bursting rates of up to 3.2Gbps. Designed with simplicity in mind, the chips are simple to connect and control, with no firmware development required - just "fit and forget".
The UMFT60XX range of evaluation/development modules with either FMC(LPC)/HSMC connectors have been designed to interface with the FT60x. The series allows for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of the FT60X. As a daughter card, the UMFT60xx must work with a FIFO master board which has either a FMC or HSMC connector. There are 4 models which provide different FIFO bus interfaces and data bit widths, and they are designed to plug in to most FPGA development platforms supplied by vendors such as Xilinx or Altera.
Enabling faster and higher volume data transfers than ever before, the FT60x is the first SuperSpeed USB3.0 series from FTDI Chip that offers USB access to a wider range of data intensive imaging and data acquisition applications.The series incorporates two devices - the FT600 and FT601, which function as SuperSpeed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. The FT600 comes in a 56-pin QFN package and has a 16-bit wide FIFO bus interface, while the FT601 is provided in a 76-pin package and has a 32-bit wide FIFO bus interface.
Both chips support up to 8 endpoints, with 2 additional communication endpoints, allowing for up to 4 data IN and 4 data OUT channels to be created with double buffering of up to 4kByte length for IN and 4kByte for OUT.
The series is simple to connect and control, with no additional firmware development required - just "fit and forget".
This device is featured alongside our full range of USB products in our USB brochure
SuperSpeed Module,FT601 USB3.0 - Altera >
USB to I2C, USB to Quad SPI for FT4222H, >
FTDI FT601Q-T Interface Bridges, USB to >
Video Processor, Security Systems, Medic >
IC BRIDGE USB TO I2C/SPI 32VQFN >
UART, 32 Pin, Plastic, LCC >
High Speed USB to UART/MPSSE USB 2.0 3.3 >
Controller, Usb, Vinculum Ii, 48lqfp >
Modules Accessories Vinco Prototyping Sh >
Controller, usb, vinculum ii, 32qfn >
USB Interface, Vinculum-II Programmable >
USB Interface, Vinculum USB Host Control >
USB Controller, 2-Channel, 12MBps, USB >
FT800 EVE Credit Card 5in Resistive Tou >
Display: TFT; 4.3"; 480x272; Illumin: LE >
- FT232BL R