DC/DC module simplifies power supply design
Update Time: 2019-12-20 23:18:03
Intersil Corporation announced the ISL8203M, a dual 3A/single 6A step-down DC/DC power module that simplifies power supply design for FPGAs, ASICs, microprocessors, DSPs and other point of load conversions in communications, test and measurement, and industrial systems. The module’s compact 9.0mm x 6.5mm x 1.83mm footprint combined with industry-leading 95 percent efficiency provides power system designers with a high performance, easy to use solution for their low power, low voltage applications.
The ISL8203M is a complete power system in an encapsulated module that includes a PWM controller, synchronous switching MOSFETs, inductors and passive components to build a power supply supporting an input voltage range of 2.85V to 6V. With an adjustable output voltage between 0.8V and 5V, designers are able to use one device to build a single 6A or dual output 3A power supply.
Designed to maximize efficiency, the ISL8203M power module offers best-in-class 15° C/W thermal performance and delivers 6A at 85° C without the need for heat sinks or a fan. The ISL8203M leverages Intersil’s patented technology and advanced packaging techniques to deliver high power density and the best thermal performance in the industry, allowing the ISL8203M to operate at full load over a wide temperature range. The power module also provides over-temperature, over-current and under-voltage lockout protection, further enhancing its robustness and reliability.
“Our customers are building increasingly compact DC/DC solutions,” said Mark Downing, senior vice president of Infrastructure and Industrial Power Products at Intersil. “The ISL8203M analog power module offers the smallest footprint for a dual output low power solution without performance compromise, making it possible for customers to get the footprint and the efficiency they require.”
Key Features and Specifications
• Dual 3A or single 6A switching power supply
• High efficiency, up to 95 percent
• Wide input voltage range: 2.85V to 6V
• Adjustable output range: 0.8V to 5V
• Internal digital soft-start: 1.5ms
• External synchronization up to 4MHz
• Overcurrent protection
For more information about Intersil, visit www.intersil.com.
Previous: LED Driver ICs are optimized for high-line applications.
Next: New technology---Intel’s Stratix 10 FPGA: Supporting the Smart and Connected Revolution
Ratings and Reviews
Related Products
-
TW8816-LB3
Intersil
LQFP128 > -
TW2868-LA2-GR
Intersil
QFP > -
TW2812-TA1-CR
Intersil
QFP > -
ISL98611AIIZ-T
Intersil
Display power IC and LED driver with 36V > -
TW2960LA1-CR
Intersil
QFP > -
ISL95859HRTZ-T
Intersil
Digital Micromirror Device 140.3mW 40Pin > -
ISL85403IRZ
Intersil
QFN > -
ISL6173DRZ
Intersil
QFN-28 > -
ISL55163CNEZ
Intersil
QFP > -
ISL85410
Intersil
Wide VIN 1A Synchronous Buck Regulator > -
ISL9220A
Intersil
Switching Charger for 1-Cell and 2-Cell > -
ISL78233
Intersil
AEC-Q100 DC/DC Converters Allow Migratio > -
X28HC64JI-90
Intersil
5 Volt, Byte Alterable EEPROM > -
X28HC256SI-12
Intersil
32K X 8 EEPROM,CMOS,SOIC,HIGH SPEED,I.TE > -
X24645S8I
Intersil
Controller IC; Package/Case:12-MLPQ; Sup >
Hot Stocks
More- TW8817-DETA3-GR
- ISL97516
- ISL84051
- ISL8200MMREP
- ISL6535
- ISL6302CBZ
- ISL6294
- ISL62872HRUZ
- ISL6253
- ISL60002DIH312Z
- ISL58811CRZ-T7
- ISL29033IROZ-T7
- IRF9533
- IRF9523
- IM5603ACJE
- IL709M
- IH5010CDD
- ID82C84A
- ICM7045
- ICL8069CCSQ
- ICL7660SMTV
- HSP43168JC-33
- HIP52290DRZR5128
- HIP2060AS3
- HI1-549/883
- HCA8001
- HC55185AIMZ
- HC5503TCBZ
- HC1-55564/883
- HA9P4741-9
- HA7-5147-5
- EL7457CS
- CX50222-11Z
- CDP68HC68P1E
- CDP6402
- CDP1806
- CD4013AE
- CA3318CE
- CA3127E
- CA1558T
- 95831HRTZ
- 922Z
- 8038CCPD
- 5962F9563002VYC
- 100589