Introduction of the ADuCM4050 MCU And Evaluation Kits
Published time: 2019-12-20 16:39:05
Introduction of the ADuCM4050 microcontroller unit (MCU)
The ADuCM4050 microcontroller unit (MCU) is an ultra low power integrated microcontroller system with integrated power management for processing, control, and connectivity. The MCU system is based on the ARM® Cortex®-M4F processor. The MCU also has a collection of digital peripherals, embedded static random access memory (SRAM) and embedded flash memory, and an analog subsystem that provides clocking, reset, and power management capabilities in addition to an analog-to-digital converter (ADC) subsystem.
The system features include an up to 52 MHz ARM Cortex-M4F processor, 512 kB of embedded flash memory with error correction code (ECC), an optional 4 kB cache for lower active power, and 128 kB system SRAM with parity. The ADuCM4050 features a power management unit (PMU), multilayer advanced microcontroller bus architecture (AMBA) bus matrix, central direct memory access (DMA) controller, and beeper interface.
The ADuCM4050 features cryptographic hardware supporting advanced encryption standard (AES)-128 and AES-256 with secure hash algorithm (SHA)-256 and the following modes: electronic code book (ECB), cipher block chaining (CBC), counter (CTR), and cipher block chaining-message authentication code (CCM/CCM*) modes.
The ADuCM4050 has protected key storage with key wrap/ unwrap, and keyed hashed message authentication code (HMAC) with key unwrap.The ADuCM4050 supports serial port (SPORT), serial peripheral interface (SPI), I2C, and universal asynchronous receiver/ transmitter (UART) peripheral interfaces.
The ADuCM4050 features a real-time clock (RTC), general-purpose and watchdog timers, and programmable general-purpose input/output (GPIO) pins. There is a hardware cyclic redundancy check (CRC) calculator with programmable generator polynomial. The device also features a power on reset (POR) and power supply monitor (PSM), a 12-bit successive approximation register (SAR) ADC, a red/green/blue (RGB) timer for driving RGB LED, and a true random number generator (TRNG).To support low dynamic and hibernate power management, the ADuCM4050 MCU provides a collection of power modes and features such as dynamic- and software-controlled clock gating and power gating.
1.Ultra low power consumption.2.Robust operation.
3.Full voltage monitoring in deep sleep modes.
4.ECC support on flash.
5.Parity error detection on SRAM memory.
6.Leading edge security.
7.Fast encryption provides read protection to user algorithms.
8.Write protection prevents device reprogramming by unauthorized code.
9.Failure detection of 32 kHz low frequency external crystal oscillator (LFXTAL) via interrupt.
10.SensorStrobe™ for precise time synchronized sampling of external sensors. Works in hibernate mode, resulting in drastic current reduction in system solutions. Current consumption reduces by 10 times when using, for example, the ADXL363 accelerometer. Software intervention is not required after setup. No pulse drift due to software execution.
Applications of ADuCM40501.Internet of Things (IoT)
2.Smart agriculture, smart building, smart metering, smart city, smart machine, and sensor network
4.Fitness and clinical
5.Machine learning and neural networks
Features and Benefits Of ADuCM4050
The EV-COG-AD4050 is a development platform for Analog Devices Ultra Low Power technology across ADI's MCU and RF transceiver portfolio. The board uses CrossCore Embedded Studio, an open source Eclipse based Interactive Development Environment (IDE), which can be downloaded free of charge. The platform contains many hardware and software example projects to make it easier for customers to prototype and create solutions for Internet of Things (IoT) applications.
A Cog development system may consist of these:
1.A MCU Cog that highlights the differentiating values of ADI ULP portfolio.2.An optional add-on board (Gear) for application specific use case.
3.An optional wireless board (RF-Cog) for connectivity.
The Cog development system objective is to rapidly create a development/prototyping capability focused on industrial, professional, pro-sumer customers, with a flexible radio, microprocessor, sensor and application development environment.
Features and Benefits of EV-COG-AD4050
1.On-board ultra-low power ARM Cortex M4F MCU2.No external Debugger/Emulator Tools required
3.Small form factor (75X35mm )
4.Multiple power options – USB, Coincell, External, Li-Ion Onboard peripherals – Accelerometer, Temperature sensor
5.Compatible with ADI RF daughter cards, and RF modules
6.Compatible with ADI application add-on boards (Gears)
7.Expansion Connectors and Jumpers for providing external access to all MCU signals
Digital Isolator CMOS 4-CH 150Mbps 16-Pi >
LDO Regulator Pos 2V 0.15A 5-Pin TSOT T/ >
LTC3129 - 15V, 200mA Synchronous Buck-Bo >
DC DC CNVRTR 0.5-3.3V 0.5-3.3V >
Interface - CODECs Low Power Audio Codec >
Micropower, Dual, Single Supply Precisio >
OP Amp Single GP ±20V >
Programmable Delay Block -40C to 85C Aut >
Silicon Oscillator - 3.81e-06MHz to 1MHz >
Ic oscillator 80mhz tsot23-5 >
IC REG BUCK 1.8V 0.25A 8MSOP >
Active Filter Quad Continuous Time UNIV >
IC A/D CONV 14BIT SRL&PAR 28SSOP >
Power Over Ethernet 23V 60V 90W Automoti >
- ADSST-CSD-01 KEMO