DRIVER IC, Supply Voltage Min:-, Supply Voltage Max:-, No. of Outputs:-, Output Voltage:-, Output Current:-, Driver Case Style:DIP, Packaging:Each, Product Range:-, MSL:-, Device Type:Latched, No. of Drivers:4Drivers
Manufacturer : | Allegro MicroSystems, Inc |
---|---|
Package/Case : | DIP-22 |
Product Categories : | Logic - Specialty Logic |
Datasheet: | UCN5801A Datasheet (PDF) |
RoHs Status: | Lead free / RoHS Compliant |
In-stock: | 200 |
Quantity
Request for Quotation
UCN5801A Product Details
The UCN5800A/L and UCN5801A/EP/LW latched-input BiMOS ICs merge high-current, high-voltage outputs with CMOS logic. The CMOS input section consists of 4 or 8 data (‘D’ type) latches with associated common CLEAR, STROBE, and OUTPUT ENABLE circuitry. The power outputs are bipolar npn Darlingtons. This merged technology provides versatile, flexible interface. These BiMOS power interface ICs greatly benefit the simplification of computer or microprocessor I/O. The UCN5800A and UCN5800L each contain four latched drivers; the UCN5801A, UCN5801EP, and UCN5801LW contain eight latched drivers.
The UCN5800A/L and UCN5801A/EP/LW supersede the original BiMOS latched-input driver ICs (UCN4400A and UCN4801A). These second-generation devices are capable of much higher data input rates and will typically operate at better than 5 MHz with a 5 V logic supply. Circuit operation at 12 V affords substantial improvement over the 5 MHz figure.
The CMOS inputs are compatible with standard CMOS and NMOS circuits. TTL circuits may mandate the addition of input pull-up resistors. The bipolar Darlington outputs are suitable for directly driving many peripheral/power loads: relays, lamps, solenoids, small dc motors, etc.
All devices have open-collector outputs and integral diodes for inductive load transient suppression. The output transistors are
capable of sinking 500 mA and will withstand at least 50 V in the OFF state. Because of limitations on package power dissipation, the simultaneous operation of all drivers at maximum rated current can only be accomplished by a reduction in duty cycle. Outputs may be paralleled for higher load current capability.
The UCN5800A is furnished in a standard 14-pin DIP; the UCN5800L and UCN5801LW in surface-mountable SOICs; the UCN5801A in a 22-pin DIP with 0.400" (10.16 mm) row centers; the UCN5801EP in a 28-lead PLCC.
FEATURES
■ To 4.4 MHz Data Input Rate
■ High-Voltage, High-Current Outputs
■ CMOS, NMOS, TTL Compatible Inputs
■ Output Transient Protection
■ Internal Pull-Down Resistors
■ Low-Power CMOS Latches
■ Automotive Capable
(Picture: Pinout)
(Picture: Diagram)
Technical Parameters
- Manufacturer
- ALLEGRO
- Packing
- Tape & Reel (TR)/Cut Tape (CT)/Tray/Tube
- RoHs Status
- Lead free / RoHS Compliant
- Package/Case
- DIP-22
UCN5801A Datasheet
UCN5801A Related Products
Ratings and Reviews (1)
- 5 / 5
- 5 Stars 100%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
-
**olan***
Alles super, schneller Versand, Ware 1a
- Shipping:
Shipping & Payment
Shipping
- Shipping Type
- Ship Fee
- Lead Time
- DHL
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- Fedex
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- UPS
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- TNT
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- EMS
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time:Shipping fee depend on different zone and country.
Payment
- Terms of payment
- Hand Fee
- Wire Transfer
- charge US$30.00 banking fee.
- Paypal
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from US$2.00.
-
90 days quality guarantee for all products.
Packing
-
Step1: Products
-
Step2: Vacuum Packaging
-
Step3: Anti-Static Bag
-
Step4: Individual Packaging
-
Step5: Packaging Boxes
-
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
FAQ:
- Q: How does Jotrin guarantee that UCN5801A is the original manufacturer or agent of ALLEGRO?
- We have a professional business development department to strictly test and verify the qualifications of ALLEGRO original manufacturers and agents. All ALLEGRO suppliers must pass the qualification review before they can publish their UCN5801A devices; we pay more attention to the channels and quality of UCN5801A products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of UCN5801A chips? Including ALLEGRO original factory information, Logic - Specialty Logic application, UCN5801A pictures?
- You can use Jotrin's intelligent search engine, or filter by Logic - Specialty Logic category, or find it through Allegro MicroSystems, Inc Information page.
- Q: Are the ALLEGRO's UCN5801A price and stock displayed on the platform accurate?
- The ALLEGRO's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for UCN5801A, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
-
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online. - Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
-
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days. - Q: What is the process for returns or replacement of UCN5801A?
-
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the UCN5801A we delivered, we will accept the replacement or return of the UCN5801A only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of UCN5801A.
(3)The UCN5801A is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy. - Q: How to contact us and get support, such as UCN5801A datasheet pdf, UCN5801A pin diagram?
- Need any After-Sales service, please feel free contact us: sales@jotrin.com
Allegro MicroSystems, Inc
- 1.Current detection scheme for ACS712 current sensor
- 2.Current sensor IC is designed with differential output and externally adjustable gain
- 3.Dual-output sensor targeted at the automotive, industrial, white goods, and commercial markets
- 4.Motor driver IC operates at up to 28 V
- 5.Sensor IC includes integrated capacitor
- 6.Current sensor ICs include internal resistance of 0.85 mΩ typical
Certificates & Honor
