Products > Integrated Circuits (ICs) > Multimedia ICs > TMS320DM8127BCYE3

Images are for reference only.


DaVinci Video Processors

  • Manufacturer :
  • TI
  • Package/Case :
  • 684-BFBGA, FCBGA
  • Product Categories :
  • DSP (Digital Signal Processors)
  • RoHs Status:
  • Lead free/RoHS Compliant
  • In-stock:
  • 0


Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.

TMS320DM8127BCYE3 Product Details

TMS320DM8127BCYE3 DaVinci Digital Media processors are highly integrated,programmable platforms that leverage the technology to meet the processing needsof the following applications to name a few:IP Network Cameras IndustrialAutomation Network Cameras Stereo Cameras Video Surveillance HD VideoConferencing Car Black BoxHome Audio and Video Equipment

The device enables Original-Equipment Manufacturers (OEMs) andOriginal-Design Manufacturers (ODMs) to quickly bring to market devicesfeaturing robust operating systems support, rich user interfaces, and highprocessing performance through the maximum flexibility of a fully integratedmixed processor solution. The device also combines programmable video and audioprocessing with a highly integrated peripheral set.

Programmability is provided by an ARM Cortex-A8 RISC CPU with Neon extension,TI C674x VLIW floating-point DSP core, and high-definition video and imagingcoprocessors. The ARM lets developers keep control functions separate from A/Valgorithms programmed on the DSP and coprocessors, thus reducing the complexityof the system software. The ARM Cortex-A8 32-Bit RISC Core with Neonfloating-point extension includes: 32KB of Instruction cache; 32KB of Datacache; 256KB of L2 Cache; 48KB of Boot ROM; and 64KB of RAM.

The rich peripheral set provides the ability to control external peripheraldevices and communicate with external processors. For details on each of theperipherals, see the related sections in this document and the associatedperipheral reference guides. The peripheral set includes: HD Video ProcessingSubsystem Dual Port Gigabit Ethernet MACs (10/100/1000 Mbps) [Ethernet Switch]with MII/RMII/GMII/RGMII and MDIO interface supporting IEEE 1588 Time-Stamping,AVB, and Industrial Ethernet ProtocolsTwo USB ports with integrated 2.0 PHY PCIex1 GEN2 Compliant interfaceTwo 10-serializer McASP audio serial ports (with DITmode)Four quad-serilaizer McASP audio serial ports (with DIT mode)One McBSPmultichannel buffered serial portSix UARTs with IrDA and CIR supportFour SPIserial interfacesThree MMC/SD/SDIO serial interfacesFour I2C masterand slave interfaces Parallel Camera Interface (CAM)Up to128 General-Purpose I/Os (GPIOs)Eight 32-bit general-purpose timers Systemwatchdog timer Dual DDR2, and DDR3 SDRAM interfacesFlexible 8- or 16-bitasynchronous memory interfaceTwo Controller Area Network (DCAN) modulesSpinLockMailbox

The TMS320DM8127BCYE3 DaVinci Digital Media processors also include ahigh-definition video and imaging coprocessor 2 (HDVICP2) to off-load many videoand imaging processing tasks from the DSP core, making more DSP MIPS availablefor common video and imaging algorithms. Additionally, the TMS320DM8127BCYE3 DaVinciDigital Media processors have a complete set of development tools for both theARM and DSP which include C compilers, a DSP assembly optimizer to simplifyprogramming and scheduling, and a Microsoft Windows debugger interface forvisibility into source code execution.

The C674x DSP core is the high-performance floating-point DSP generation inthe TMS320C6000 DSP platform and is code-compatible with previous generationC64x Fixed-Point and C67x Floating-Point DSP generation. The C674xFloating-Point DSP processor uses 32KB of L1 program memory with EDC and 32KB ofL1 data memory. Up to 32KB of L1P can be configured as program cache. Theremaining memory is noncacheable no-wait-state program memory. Up to 32KB of L1Dcan be configured as data cache. The remaining memory is noncacheableno-wait-state data memory. The DSP has 256KB of L2 RAM with ECC, which can bedefined as SRAM, L2 cache, or a combination of both. All C674x L3 and off-chip



  • High-Performance DaVinci Video Processors
    • Up to 1-GHz ARM Cortex-A8 RISC Core
    • Up to 750-MHz C674x VLIW DSP
    • Up to 6000 MIPS and 4500 MFLOPS
    • Fully Software-Compatible with C67x+, C64x+
  • ARM Cortex-A8 Core
    • ARMv7 Architecture
      • In-Order, Dual-Issue, Superscalar Processor Core
      • Neon Multimedia Architecture
      • Supports Integer and Floating Point
      • Jazelle RCT Execution Environment
  • ARM Cortex-A8 Memory Architecture
    • 32KB of Instruction and Data Caches
    • 256KB of L2 Cache
    • 64KB of RAM, 48KB of Boot ROM
  • TMS320C674x Floating-Point VLIW DSP
    • 64 General-Purpose Registers (32-Bit)
    • Six ALU (32-/40-Bit) Functional Units
      • Supports 32-Bit Integer, SP (IEEE Single Precision/32-Bit) and DP(IEEE Double Precision/64-Bit) Floating Point
      • Supports up to Four SP Adds Per Clock and Four DP Adds Every TwoClocks
      • Supports up to Two Floating-Point (SP or DP) Approximate Reciprocal orSquare Root Operations Per Cycle
    • Two Multiply Functional Units
      • Mixed-Precision IEEE Floating-Point Multiply Supported up to:
        • 2 SP x SP → SP Per Clock
        • 2 SP x SP → DP Every Two Clocks
        • 2 SP x DP → DP Every Three Clocks
        • 2 DP x DP → DP Every Four Clocks
      • Fixed-Point Multiply Supports Two 32 x 32 Multiplies, Four 16 x 16-BitMultiplies Including Complex Multiplies, or Eight 8 x 8-Bit Multiplies perClock Cycle
  • 128KB of On-Chip Memory Controller (OCMC) RAM
  • Imaging Subsystem (ISS)
    • Camera Sensor Connection
      • Parallel Connection for Raw (up to 16-Bit) and BT.656 or BT.1120 (8-and 16-Bit)
      • CSI2 Serial Connection
    • Image Sensor Interface (ISIF) for Handling Image and Video Data From theCamera Sensor
    • Image Pipe Interface (IPIPEIF) for Image and Video Data ConnectionBetween Camera Sensor, ISIF, IPIPE, and DRAM
    • Image Pipe (IPIPE) for Real-Time Image and Video Processing
    • Resizer
      • Resizing Image and Video From 1/16x to 8x
      • Generating Two Different Resizing Outputs Concurrently
    • Hardware 3A Engine (H3A) for Generating Key Statistics for 3A (AE, AWB,and AF) Control
  • Face Detect Engine (FD)
    • Hardware Face Detection for up to 35 Faces at OPP100
  • Programmable High-Definition Video Image Coprocessing (HDVICP v2) Engine
    • Encode, Decode, Transcode Operations
    • H.264, MPEG-2, VC-1, MPEG-4, SP/ASP, JPEG/MJPEG
  • Media Controller
    • Controls the HDVPSS and ISS
  • Endianness
    • ARM and DSP Instructions/Data – Little Endian
  • HD Video Processing Subsystem (HDVPSS)
    • One 165-MHz HD Video Capture Input
      • One 16- or 24-Bit Input, Splittable into Dual 8-Bit SD CapturePorts
    • Two 165-MHz HD Video Display Outputs
      • One 16-, 24-, or 30-Bit Output and One 16- or 24-BitOutput
    • Composite or S-Video Analog Output
    • Macrovision Support Available
    • Digital HDMI 1.3 Transmitter With Integrated PHY
    • Advanced Video Processing Features Such as Scan, Format, RateConversion
    • Three Graphics Layers and Compositors
  • Dual 32-Bit DDR2/DDR3 SDRAM Interfaces
    • Supports up to DDR2-800 and DDR3-1066
    • Up to Eight x 8 Devices Total 2GB of Total Address Space
    • Dynamic Memory Manager (DMM)
      • Programmable Multi-Zone Memory Mapping and Interleaving
      • Enables Efficient 2D Block Accesses
      • Supports Tiled Objects in 0°, 90°, 180°, or 270° Orientation andMirroring
      • Optimizes Interlaced Accesses
  • General-Purpose Memory Controller (GPMC)
    • 8- or 16-Bit Multiplexed Address and Data Bus
    • 512MB of Address Space Divided Among up to 8 Chip Selects
    • Glueless Interface to NOR Flash, NAND Flash (BCH/Hamming Error CodeDetection), SRAM and Pseudo-SRAM
    • Error Locator Module (ELM) Outside of GPMC to Provide Up to 16-Bit or512-Byte Hardware ECC for NAND
    • Flexible Asynchronous Protocol Control for Interface to FPGA, CPLD,ASICs, and so Forth
  • Enhanced Direct Memory Access (EDMA) Controller
    • Four Transfer Controllers
    • 64 Independent DMA Channels and 8 Independent QDMA Channels
  • Dual Port Ethernet (10/100/1000 Mbps) With Optional Switch
    • IEEE 802.3 Compliant (3.3-V I/O Only)
    • MII/RMII/GMII/RGMII Media Independent Interfaces
    • Management Data I/O (MDIO) Module
    • Reset Isolation
    • IEEE 1588 Time-Stamping, AVB, and Industrial EthernetProtocols
  • Dual USB 2.0 Ports With Integrated PHYs
    • USB2.0 High- and Full-Speed Clients
    • USB2.0 High-, Full-, and Low-Speed Hosts, or OTG
    • Supports End Points 0–15
  • One PCI Express 2.0 Port With Integrated PHY
    • Single Port With One Lane at 5.0 GT/s
    • Configurable as Root Complex or Endpoint
  • Eight 32-Bit General-Purpose Timers (Timer1–8)
  • One System Watchdog Timer (WDT0)
  • Six Configurable UART/IrDA/CIR Modules
    • UART0 With Modem Control Signals
    • Supports up to 3.6864 Mbps UART0/1/2
    • Supports up to 12 Mbps UART3/4/5
    • SIR, MIR, FIR (4.0 MBAUD), and CIR
  • Four Serial Peripheral Interfaces (SPIs) (up to
    48 MHz)
    • Each With Four Chip Selects
  • Three MMC/SD/SDIO Serial Interfaces (up to
    48 MHz)
    • Three Supporting up to 1-, 4-, or 8-Bit Modes
  • Four Inter-Integrated Circuit (I2C Bus) Ports
  • Six Multichannel Audio Serial Ports (McASPs)
    • Dual Ten Serializer Transmit and Receive Ports
    • Quad Four Serializer Transmit and Receive Ports
    • DIT-Capable For S/PDIF (All Ports)
  • Multichannel Buffered Serial Port (McBSP)
    • Transmit and Receive Clocks up to 48 MHz
    • Two Clock Zones and Two Serial Data Pins
    • Supports TDM, I2S, and Similar Formats
  • Real-Time Clock (RTC)
    • One-Time or Periodic Interrupt Generation
  • Up to 128 General-Purpose I/O (GPIO) Pins
  • One Spin Lock Module with up to 128 Hardware Semaphores
  • One Mailbox Module with 12 Mailboxes
  • On-Chip ARM ROM Bootloader (RBL)
  • Power, Reset, and Clock Management
    • Multiple Independent Core Power Domains
    • Multiple Independent Core Voltage Domains
    • Support for Three Operating Points (OPP100, OPP120, OPP166) per VoltageDomain
    • Clock Enable and Disable Control for Subsystems andPeripherals
  • 32KB of Embedded Trace Buffer (ETB) and
    5-Pin Trace Interface forDebug
  • IEEE 1149.1 (JTAG) Compatible
  • 684-Pin Pb-Free BGA Package (CYE Suffix), 0.8-mm Ball Pitch With ViaChannel Technology to Reduce PCB Cost
  • 45-nm CMOS Technology

TMS320DM8127BCYE3 Products

Technical Parameters

  • Type
  • Digital Media System-on-Chip (DMSoC)
  • Interface
  • CAN, Ethernet, I2C, McASP, McBSP, MMC/SD, SPI, UART, USB
  • Clock Rate
  • 750MHz DSP, 1GHz ARM?
  • Non Volatile Memory
  • ROM (48 kB)
  • On Chip RAM
  • 832kB
  • Voltage I/O
  • 1.5V, 1.8V, 3.3V
  • Voltage Core
  • 1.15V
  • Operating Temperature
  • 0??C ~ 90??C (TJ)
  • Mounting Type
  • Surface Mount
  • Package / Case
  • 684-BFBGA, FCBGA
  • Supplier Device Package
  • 684-FCBGA (23x23)

TMS320DM8127BCYE3 Documents

TMS320DM8127BCYE3 Related Products

Ratings and Reviews (1)

  • 5 / 5
  • 5 Stars 100%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
  • **RICK***

    excellent trade, item as described and received promptly. Thanks

  • Ratings
  • Please rate the product!
Shipping More
Estimated Delivery Time: Aug 02 - Aug 07 days (choose Expedited at checkout).

Shipping & Payment


  • Shipping Type
  • Ship Fee
  • Lead Time
  • $20.00-$40.00 (0.50 KG)
  • 2-5 days
  • $20.00-$40.00 (0.50 KG)
  • 3-7 days
  • $20.00-$45.00 (0.50 KG)
  • 2-5 days
  • $25.00-$65.00 (0.50 KG)
  • 2-5 days
  • $25.00-$45.00 (0.50 KG)
  • 5-14 days
  • $2.00-$3.00 (0.10 KG)
  • 7-30 days

Processing Time:Shipping fee depend on different zone and country.


  • Terms of payment
  • Hand Fee
  • Payment Site
  • charge US$30.00 banking fee.
  • charge 4.0% service fee.
  • charge 3.5% service fee.
  • charge US$0.00 banking fee.
  • charge US$0.00 banking fee.

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.


  • Step1:Product

    Step1: Products

  • Step2:Vacuum packaging

    Step2: Vacuum Packaging

  • Step3:Anti-static bag

    Step3: Anti-Static Bag

  • Step4:Individual packaging

    Step4: Individual Packaging

  • Step5:Packaging boxes

    Step5: Packaging Boxes

  • Step6:bar-code shipping tag

    Step6: Bar-Code Shipping Tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Jotrin ESD packing


1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.


Q: How does Jotrin guarantee that TMS320DM8127BCYE3 is the original manufacturer or agent of TI?
We have a professional business development department to strictly test and verify the qualifications of TI original manufacturers and agents. All TI suppliers must pass the qualification review before they can publish their TMS320DM8127BCYE3 devices; we pay more attention to the channels and quality of TMS320DM8127BCYE3 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
Q: How to find the detailed information of TMS320DM8127BCYE3 chips? Including TI original factory information, DSP (Digital Signal Processors) application, TMS320DM8127BCYE3 pictures?
You can use Jotrin's intelligent search engine, or filter by Processors ; Digital signal processors (DSP) ; Audio & media processors category, or find it through TI brand manufacturer page.
Q: Are the TI's TMS320DM8127BCYE3 price and stock displayed on the platform accurate?
The TI's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for TMS320DM8127BCYE3, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
Q: What forms of payment can I use in Jotrin?
TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement of TMS320DM8127BCYE3?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the TMS320DM8127BCYE3 we delivered, we will accept the replacement or return of the TMS320DM8127BCYE3 only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of TMS320DM8127BCYE3.
(3)The TMS320DM8127BCYE3 is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
Q: How to contact us and get support, such as TMS320DM8127BCYE3 datasheet pdf, TMS320DM8127 pin diagram?
Need any After-Sales service, please feel free contact us:

Popular Electronic Parts

Certificates & Honor

Certificates & Honor