Products > Integrated Circuits (ICs) > Embedded Processors & Controllers > TMS320DM6467TCUT9

Images are for reference only.


Hot Sale

Digital Signal Processors & Controllers - DSP, DSC Dig Media SOC

  • Manufacturer :
  • TI
  • Package/Case :
  • BGA-529
  • Product Categories :
  • Digital Signal Processors & Controllers - DSP, DSC
  • RoHs Status:
  • Rohs
  • Marking Code:
  • TMS320 DM6467TCUT9
  • In-stock:
  • 0


Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.

TMS320DM6467TCUT9 Product Details

The TMS320DM6467TCUT9 (also referenced as DM6467) leverages TI's DaVincitechnology to meet the networked media encode and decode digital media processingneeds of next-generation embedded devices.

The DM6467 enables OEMs and ODMs to quickly bring to market devices featuringrobust operating systems support, rich user interfaces, high processingperformance, and long battery life through the maximum flexibility of a fullyintegrated mixed processor solution.

The dual-core architecture of the DM6467 provides benefits of both DSP andReduced Instruction Set Computer (RISC) technologies, incorporating ahigh-performance TMS320C64x+ DSP core and an ARM926EJ-S core.

The ARM926EJ-S is a 32-bit RISC processor core that performs 32-bit or 16-bitinstructions and processes 32-bit, 16-bit, or 8-bit data. The core usespipelining so that all parts of the processor and memory system can operatecontinuously.

The ARM core incorporates:

  • A coprocessor 15 (CP15) and protection module
  • Data and program Memory Management Units (MMUs) with table look-aside buffers.
  • Separate 16K-byte instruction and 8K-byte data caches. Both are four-way associative with virtual index virtual tag (VIVT).

The TMS320C64x+ DSPs are the highest-performance fixed-point DSP generationin the TMS320C6000 DSP platform. It is based on an enhanced version of thesecond-generation high-performance, advanced very-long-instruction-word (VLIW)architecture developed by Texas Instruments (TI), making these DSP cores anexcellent choice for digital media applications. The C64x is a code-compatiblemember of the C6000 DSP platform. The TMS320C64x+ DSP is an enhancement of theC64x+ DSP with added functionality and an expanded instruction set.

Any reference to the C64x DSP or C64x CPU also applies, unless otherwisenoted, to the C64x+ DSP and C64x+ CPU, respectively.

With performance of up to 5832 million instructions per second (MIPS) at aclock rate of 729 MHz, the C64x+ core offers solutions to high-performance DSPprogramming challenges. The DSP core possesses the operational flexibility ofhigh-speed controllers and the numerical capability of array processors. TheC64x+ DSP core processor has 64 general-purpose registers of 32-bit word lengthand eight highly independent functional units-two multipliers for a 32-bitresult and six arithmetic logic units (ALUs). The eight functional units includeinstructions to accelerate the performance in video and imaging applications.The DSP core can produce four 16-bit multiply-accumulates (MACs) per cycle for atotal of 2376 million MACs per second (MMACS), or eight 8-bit MACs per cycle fora total of 4752 MMACS. For more details on the C64x+ DSP, see theTMS320C64x/C64x+ DSP CPU and Instruction Set Reference Guide(literaturenumber SPRU732).

The DM6467 also has application-specific hardware logic, on-chip memory, andadditional on-chip peripherals similar to the other C6000 DSP platform devices.The DM6467 core uses a two-level cache-based architecture. The Level 1 programcache (L1P) is a 256K-bit direct mapped cache and the Level 1 data cache (L1D)is a 640K-bit 2-way set-associative cache. The Level 2 memory/cache (L2)consists of an 512K-bit memory space that is shared between program and dataspace. L2 memory can be configured as mapped memory, cache, or combinations ofthe two.

The peripheral set includes: a configurable video port; a 10/100/1000 Mb/sEthernet MAC (EMAC) with a Management Data Input/Output (MDIO) module; a 4-bittransfer/4-bit receive VLYNQ interface; an inter-integrated circuit (I2C) Businterface; a multichannel audio serial port (McASP0) with 4 serializers; asecondary multichannel audio serial port (McASP1) with a single transmitserializer; 2 64-bit general-purpose timers each configurable as 2 independent32-bit timers; 1 64-bit watchdog timer; a configurable 32-bit host portinterface (HPI); up to 33-pins of general-purpose input/output (GPIO) withprogrammable interrupt/event generation modes, multiplexed with otherperipherals; 3 UART/IrDA/CIR interfaces with modem interface signals on UART0; 2pulse width modulator (PWM) peripherals; an ATA/ATAPI-6 interface; a 33-MHzperipheral component interface (PCI); and 2 external memory interfaces: anasynchronous external memory interface (EMIFA) for slower memories/peripherals,and a higher speed synchronous memory interface for DDR2.

The Ethernet Media Access Controller (EMAC) provides an efficient interfacebetween the DM6467 and the network. The DM6467 EMAC support both 10Base-T and100Base-TX, or 10 Mbits/second (Mbps) and 100 Mbps in either half- orfull-duplex mode; and 1000Base-TX (1 Gbps) in full-duplex mode with hardwareflow control and quality of service (QOS) support.

The Management Data Input/Output (MDIO) module continuously polls all 32 MDIOaddresses in order to enumerate all PHY devices in the system. Once a PHYcandidate has been selected by the ARM, the MDIO module transparently monitorsits link state by reading the PHY status register. Link change events are storedin the MDIO module and can optionally interrupt the ARM, allowing the ARM topoll the link status of the device without continuously performing costly MDIOaccesses.

The PCI, HPI, I2C, SPI, USB2.0, and VLYNQ ports allow the DM6467 to easilycontrol peripheral devices and/or communicate with host processors.

The DM6467 also includes a High-Definition Video/Imaging Co-processor(HDVICP) and Video Data Conversion Engine (VDCE) to offload many video andimaging processing tasks from the DSP core, making more DSP MIPS available forcommon video and imaging algorithms. For more information on the HDVICP enhancedcodecs, such as H.264 and MPEG4, please contact your nearest TI salesrepresentative.

The rich peripheral set provides the ability to control external peripheraldevices and communicate with external processors. For details on each of theperipherals, see the related sections later in this document and the associatedperipheral reference guides.

The DM6467 has a complete set of development tools for both the ARM and DSP.These include C compilers, a DSP assembly optimizer to simplify programming andscheduling, and a Windows debugger interface for visibility into source code



  • Get started today with production-ready, easy-to-use audio and video codecs for digital media processors based on DaVinci technology. Also available are various O/S Board Support Packages and software updates. All codecs are available for FREE evaluation. REQUEST FREE SOFTWARE!
  • High-Performance Digital Media SoC
    • 594-, 729-MHz C64x+ Clock Rate
    • 297-, 364.5-MHz ARM926EJ-Strade; Clock Rate
    • Eight 32-Bit C64x+ Instructions/Cycle
    • 4752, 5832 C64x+ MIPS
    • Fully Software-Compatible With C64x/ARM9
    • Supports SmartReflex [-594 only]
      • Class 0
      • 1.05-V and 1.2-V Adaptive Core Voltage
    • Extended Temp Available [-594 only]
    • Industrial Temp Available [-729 only]
  • Advanced Very-Long-Instruction-Word (VLIW) TMS320C64x+ DSP Core
    • Eight Highly Independent Functional Units
      • Six ALUs (32-/40-Bit), Each Supports Single 32-Bit, Dual 16-Bit, orQuad 8-Bit Arithmetic per Clock Cycle
      • Two Multipliers Support Four 16 ×: 16-Bit Multiplies (32-Bit Results)per Clock Cycle or Eight 8 × 8-Bit Multiplies (16-Bit Results) per ClockCycle
    • Load-Store Architecture With Non-Aligned Support
    • 64 32-Bit General-Purpose Registers
    • Instruction Packing Reduces Code Size
    • All Instructions Conditional
    • Additional C64x+ Enhancements
      • Protected Mode Operation
      • Exceptions Support for Error Detection and Program Redirection
      • Hardware Support for Modulo Loop Operation
  • C64x+ Instruction Set Features
    • Byte-Addressable (8-/16-/32-/64-Bit Data)
    • 8-Bit Overflow Protection
    • Bit-Field Extract, Set, Clear
    • Normalization, Saturation, Bit-Counting
    • Compact 16-Bit Instructions
    • Additional Instructions to Support Complex Multiplies
  • C64x+ L1/L2 Memory Architecture
    • 32K-Byte L1P Program RAM/Cache (Direct Mapped)
    • 32K-Byte L1D Data RAM/Cache (2-Way Set-Associative)
    • 128K-Byte L2 Unified Mapped RAM/Cache (Flexible RAM/Cache Allocation)
  • ARM926EJ-S Core
    • Support for 32-Bit and 16-Bit (Thumb Mode) Instruction Sets
    • DSP Instruction Extensions and Single Cycle MAC
    • ARM Jazelle Technology
    • EmbeddedICE-RT Logic for Real-Time Debug
  • ARM9 Memory Architecture
    • 16K-Byte Instruction Cache
    • 8K-Byte Data Cache
    • 32K-Byte RAM
    • 8K-Byte ROM
  • Embedded Trace Buffer (ETB11) With 4KB Memory for ARM9 Debug
  • Endianness: Little Endian for ARM and DSP
  • Dual Programmable High-Definition Video Image Co-Processor (HDVICP) Engines
    • Supports a Range of Encode, Decode, and Transcode Operations
      • H.264, MPEG2, VC1, MPEG4 SP/ASP
  • Video Port Interface (VPIF)
    • Two 8-Bit SD (BT.656), Single 16-Bit HD (BT.1120), or Single Raw(8-/10-/12-Bit) Video Capture Channels
    • Two 8-Bit SD (BT.656) or Single 16-Bit HD (BT.1120) Video DisplayChannels
  • Video Data Conversion Engine (VDCE)
    • Horizontal and Vertical Downscaling
    • Chroma Conversion (4:2:24:2:0)
  • Two Transport Stream Interface (TSIF) Modules
    (One Parallel/Serial andOne Serial Only)
    • TSIF for MPEG Transport Stream
    • Simultaneous Synchronous or Asynchronous Input/Output Streams
    • Absolute Time Stamp Detection
    • PID Filter With 7 PID Filter Tables
    • Corresponding Clock Reference Generator (CRGEN) Modules for SystemTime-Clock Recovery
  • External Memory Interfaces (EMIFs)
    • 297-.310.5-MHz 32-Bit DDR2 SDRAM Memory Controller With 256M-Byte Address Space (1.8-V I/O)
    • Asynchronous 16-Bit-Wide EMIF (EMIFA) With 128M-Byte Address Reach
      • Flash Memory Interfaces
        • NOR (8-/16-Bit-Wide Data)
        • NAND (8-/16-Bit-Wide Data)
  • Enhanced Direct-Memory-Access (EDMA) Controller (64 Independent Channels)
    • Programmable Default Burst Size
  • 10/100/1000 Mb/s Ethernet MAC (EMAC)
    • IEEE 802.3 Compliant (3.3-V I/O Only)
    • Supports MII and GMII Media Independent Interfaces
    • Management Data I/O (MDIO) Module
  • USB Port With Integrated 2.0 PHY
    • USB 2.0 High-/Full-Speed Client
    • USB 2.0 High-/Full-/Low-Speed Host (Mini-Host, Supporting One ExternalDevice)
  • 32-Bit, 33-MHz, 3.3-V Peripheral Component Interconnect (PCI) Master/SlaveInterface
    • Conforms to PCI Specification 2.3
  • Two 64-Bit General-Purpose Timers (Each Configurable as Two 32-Bit Timers)
  • One 64-Bit Watchdog Timer
  • Three Configurable UART/IrDA/CIR Modules (One With Modem Control Signals)
    • Supports up to 1.8432 Mbps UART
    • SIR and MIR (0.576 MBAUD)
    • CIR With Programmable Data Encoding
  • One Serial Peripheral Interface (SPI) With Two Chip-Selects
  • Master/Slave Inter-Integrated Circuit (I2C Bus)
  • Two Multichannel Audio Serial Ports (McASPs)
    • One Four-Serializer Transmit/Receive Port
    • One Single DIT Transmit Port for S/PDIF
  • 32-Bit Host Port Interface (HPI)
  • VLYNQ Interface (FPGA Interface)
  • Two Pulse Width Modulator (PWM) Outputs
  • ATA/ATAPI I/F (ATA/ATAPI-6 Specification)
  • Up to 33 General-Purpose I/O (GPIO) Pins (Multiplexed With Other DeviceFunctions)
  • On-Chip ARM ROM Bootloader (RBL)
  • Individual Power-Saving Modes for ARM/DSP
  • Flexible PLL Clock Generators
  • IEEE-1149.1 (JTAG) Boundary-Scan-Compatible
  • 529-Pin Pb-Free BGA Package (CUT Suffix), 0.8-mm Ball Pitch
  • 0.09-μm/7-Level Cu Metal Process (CMOS)
  • 3.3-V and 1.8-V I/O, 1.2/1.05-V Internal

TMS320DM6467TCUT9 Block Diagram
(Picture: Diagram)

Technical Parameters

  • Instruction Type
  • Fixed Point
  • Product
  • DSPs
  • Series
  • TMS320DM6467T
  • Tradename
  • DaVinci

TMS320DM6467TCUT9 Documents

TMS320DM6467TCUT9 Related Products

Ratings and Reviews (1)

  • 5 / 5
  • 5 Stars 100%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
  • **oux ***

    Thank you for your shipment which I have just received today. Perfectly well packaged. Impeccable quality of the component.

  • Ratings
  • Please rate the product!
Shipping More
Estimated Delivery Time: Feb 01 - Feb 06 days (choose Expedited at checkout).

Shipping & Payment


  • Shipping Type
  • Ship Fee
  • Lead Time
  • $20.00-$40.00 (0.50 KG)
  • 2-5 days
  • $20.00-$40.00 (0.50 KG)
  • 3-7 days
  • $20.00-$45.00 (0.50 KG)
  • 2-5 days
  • $25.00-$65.00 (0.50 KG)
  • 2-5 days
  • $25.00-$45.00 (0.50 KG)
  • 5-14 days
  • $2.00-$3.00 (0.10 KG)
  • 7-30 days

Processing Time:Shipping fee depend on different zone and country.


  • Terms of payment
  • Hand Fee
  • Payment Site
  • charge US$30.00 banking fee.
  • charge 4.0% service fee.
  • charge 3.5% service fee.
  • charge US$0.00 banking fee.
  • charge US$0.00 banking fee.

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.


  • Step1:Product

    Step1: Products

  • Step2:Vacuum packaging

    Step2: Vacuum Packaging

  • Step3:Anti-static bag

    Step3: Anti-Static Bag

  • Step4:Individual packaging

    Step4: Individual Packaging

  • Step5:Packaging boxes

    Step5: Packaging Boxes

  • Step6:bar-code shipping tag

    Step6: Bar-Code Shipping Tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Jotrin ESD packing


1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.


Q: How does Jotrin guarantee that TMS320DM6467TCUT9 is the original manufacturer or agent of TI?
We have a professional business development department to strictly test and verify the qualifications of TI original manufacturers and agents. All TI suppliers must pass the qualification review before they can publish their TMS320DM6467TCUT9 devices; we pay more attention to the channels and quality of TMS320DM6467TCUT9 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
Q: How to find the detailed information of TMS320DM6467TCUT9 chips? Including TI original factory information, Digital Signal Processors & Controllers - DSP, DSC application, TMS320DM6467TCUT9 pictures?
You can use Jotrin's intelligent search engine, or filter by Processors ; Digital signal processors (DSP) ; Audio & media processors category, or find it through TI brand manufacturer page.
Q: Are the TI's TMS320DM6467TCUT9 price and stock displayed on the platform accurate?
The TI's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for TMS320DM6467TCUT9, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
Q: What forms of payment can I use in Jotrin?
TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement of TMS320DM6467TCUT9?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the TMS320DM6467TCUT9 we delivered, we will accept the replacement or return of the TMS320DM6467TCUT9 only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of TMS320DM6467TCUT9.
(3)The TMS320DM6467TCUT9 is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
Q: How to contact us and get support, such as TMS320DM6467TCUT9 datasheet pdf, TMS320DM6467 pin diagram?
Need any After-Sales service, please feel free contact us:

Popular Electronic Parts

Certificates & Honor

Certificates & Honor