Products > Integrated Circuits (ICs) > Embedded Processors & Controllers > TMS320DM335ZCE216

Images are for reference only.


Hot Sale

Digital Media System-on-Chip (DMSoC) 337-NFBGA 0 to 85,Digital Signal Processors & Controllers (DSP, DSC) (DSP, DSC) Dig Media System-on Chip

  • Manufacturer :
  • TI
  • Package/Case :
  • 361BGA
  • Product Categories :
  • Digital Signal Processors & Controllers (DSP, DSC)
  • RoHs Status:
  • Green
  • In-stock:
  • 0


Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.

TMS320DM335ZCE216 Product Details

The DM335 processor is a low-cost, low-power processor providing advanced graphical user interface for display applications that do not require video compression and decompression. Coupled with a video processing subsystem (VPSS) that provides 720p display, the DM335 processor is powered by a 135/216-MHz ARM926EJ-S core so developers can create feature-rich graphical user interfaces allowing customers to interact with their portable, electronic devices such as video-enabled universal remote controls, Internet radio, e-books, video doorbells, and digital telescopes. The new DM335 is packed with the same peripherals as its predecessor, the TMS320DM355 device, including high-speed USB 2.0 on-the-go, external memory interface (EMIF), mobile DDR/DDR2, two SDIO ports, three UART Ports, two Audio Serial Ports, three SPI Ports, and SLC/MCL NAND Flash memory support. These peripherals help customers create DM335 processor-based designs that add video and audio excitement to a wide range of today's static user-interface applications while keeping silicon costs and power consumption low. The new digital media processor is completely scalable with the DM355 processor and Digital Video Evaluation Board (DVEVM), allowing customers to utilize their same code for their new DM335 processor focused designs.

The new DM335 device delivers a sophisticated suite of capabilities allowing for flexible image capture and display. Through its user interface technology, such as a four-level on-screen display, developers are able to create picture-within-picture and video-within-video as well as innovative graphic user interfaces. This is especially important for portable products that require the use of button or touch screen, such as portable karaoke, video surveillance and electronic gaming applications. Additional advanced capture and imaging technologies include support for CCD/CMOS image sensors, resize capability and video stabilization. The 1280-by-960-pixel digital LCD connection runs on a 75-MHz pixel clock and supports TV composite output for increased expandability. This highly integrated device is packaged in a 13 x 13 mm, 337 pin , 0.65 mm pitch BGA package.

The DM335 processor core is an ARM926EJ-S RISC processor. The ARM926EJ-S is a 32-bit processor core that performs 32-bit and 16-bit instructions and processes 32-bit, 16-bit, and 8-bit data. The core uses pipelining so that all parts of the processor and memory system can operate continuously. The ARM core incorporates:

  • A coprocessor 15 (CP15) and protection module
  • Data and program Memory Management Units (MMUs) with table look-aside buffers.
  • Separate 16K-byte instruction and 8K-byte data caches. Both are four-way associative with virtual index virtual tag (VIVT).

The DM335 device has a Video Processing Subsystem (VPSS) with two configurable video/imaging peripherals:

  • A Video Processing Front-End (VPFE)
  • A Video Processing Back-End (VPBE)

The VPFE port provides an interface for CCD/CMOS imager modules and video decoders. The VPBE provides hardware On Screen Display (OSD)support and composite NTSC/PAL and digital LCD output.

The DM335 peripheral set includes:

  • An inter-integrated circuit (I2C) Bus interface
  • Two audio serial ports (ASP)
  • Three 64-bit general-purpose timers each configurable as two independent 32-bit timers
  • A 64-bit watchdog timer
  • Up to 104-pins of general-purpose input/output (GPIO) with programmable interrupt/event generation modes, multiplexed with other peripherals
  • Three UARTs with hardware handshaking support on one UART
  • Three serial port Interfaces (SPI)
  • Four pulse width modulator (PWM) peripherals
  • Four real time out (RTO) outputs
  • Two Multi-Media Card / Secure Digital (MMC/SD/SDIO) interfaces
  • Wireless interfaces (Bluetooth, WLAN, WUSB) through SDIO
  • A USB 2.0 full and high-speed device and host interface
  • Two external memory interfaces:
    • An asynchronous external memory interface (AEMIF) for slower memories/peripherals such as NAND and OneNAND,
    • A high speed synchronous memory interface for DDR2/mDDR.

For software development support the DM335 has a complete set of ARM development tools which include: C compilers, assembly optimizers to simplify programming and scheduling, and a Windowsdebugger interface for visibility into source code execution.



  • Highlights
    • High-Performance Digital Media System-On-Chip (DMSoC)
    • Up to 216-MHz ARM926EJ-STM Clock Rate
    • Digital HDTV (720p/1080i) output for connection to external encoder
    • Video Processing Subsystem
      • Hardware IPIPE for Real-Time Image Processing
      • Up to 14-bit CCD/CMOS Digital Interface
      • Histogram Module
      • Resize Image 1/16x to 8x
      • Hardware On-Screen Display
      • Up to 75-MHz Pixel Clock
      • Composite NTSC/PAL video encoder output
    • Peripherals include DDR and mDDR SDRAM, 2 MMC/SD/SDIO and SmartMedia Flash Card Interfaces, USB 2.0, 3 UARTs and 3 SPIs
    • Enhanced Direct-Memory-Access (EDMA)
    • Configurable Power-Saving Modes
    • On-Chip ARM ROM Bootloader (RBL) to Boot From NAND Flash, MMC/SD, or UART
    • 3.3-V and 1.8-V I/O, 1.3-V Core
    • Debug Interface Support
    • Up to 104 General-Purpose I/O (GPIO) Pins
    • 337-Pin Ball Grid Array at 65 nm Process Technology
  • High-Performance Digital Media System-on-Chip
    • 135-, 216-MHz ARM926EJ-S Clock Rate
    • Fully Software-Compatible With ARM
    • Extended Temperature 135- and 216-MHz Devices are Available
  • ARM926EJ-S Core
    • Support for 32-Bit and 16-Bit (Thumb Mode) Instruction Sets
    • DSP Instruction Extensions and Single Cycle MAC
    • ARM Jazelle Technology
    • EmbeddedICE-RT Logic for Real-Time Debug
  • ARM9 Memory Architecture
    • 16K-Byte Instruction Cache
    • 8K-Byte Data Cache
    • 32K-Byte RAM
    • 8K-Byte ROM
    • Little Endian
  • Video Processing Subsystem
    • Front End Provides:
      • Hardware IPIPE for Real-Time Image Processing
      • Up to 14-bit CCD/CMOS Digital Interface
      • 16-/8-bit Generic YcBcR-4:2 Interface (BT.601)
      • 10-/8-bit CCIR6565/BT655 Interface
      • Up to 75-MHz Pixel Clock
      • Histogram Module
      • Resize Engine
        • Resize Images From 1/16x to 8x
        • Separate Horizontal/Vertical Control
        • Two Simultaneous Output Paths
    • Back End Provides:
      • Hardware On-Screen Display (OSD)
      • Composite NTSC/PAL video encoder output
      • 8-/16-bit YCC and Up to 18-Bit RGB666 Digital Output
      • BT.601/BT.656 Digital YCbCr 4:2:2 (8-/16-Bit) Interface
      • Digital HDTV (720p/1080i)output for connection to external encoder
  • External Memory Interfaces (EMIFs)
    • DDR2 and mDDR SDRAM 16-bit wide EMIF With 256 MByte Address Space (1.8-V I/O)
    • Asynchronous16-/8-bit Wide EMIF (AEMIF)
      • Flash Memory Interfaces
        • NAND (8-/16-bit Wide Data)
        • OneNAND(16-bit Wide Data)
  • Flash Card Interfaces
    • Two Multimedia Card (MMC) / Secure Digital (SD/SDIO)
    • SmartMedia
  • Enhanced Direct-Memory-Access (EDMA) Controller (64 Independent Channels)
  • USB Port with Integrated 2.0 High-Speed PHY that Supports
    • USB 2.0 Full and High-Speed Device
    • USB 2.0 Low, Full, and High-Speed Host
  • Three 64-Bit General-Purpose Timers (each configurable as two 32-bit timers)
  • One 64-Bit Watch Dog Timer
  • Three UARTs (One fast UART with RTS and CTS Flow Control)
  • Three Serial Port Interfaces (SPI) each with two Chip-Selects
  • One Master/Slave Inter-Integrated Circuit (I2C) Bus
  • Two Audio Serial Port (ASP)
    • I2S and TDM I2S
    • AC97 Audio Codec Interface
    • S/PDIF via Software
    • Standard Voice Codec Interface (AIC12)
    • SPI Protocol (Master Mode Only)
  • Four Pulse Width Modulator (PWM) Outputs
  • Four RTO (Real Time Out) Outputs
  • Up to 104 General-Purpose I/O (GPIO) Pins (Multiplexed with Other Device Functions)
  • On-Chip ARM ROM Bootloader (RBL) to Boot From NAND Flash, MMC/SD, or UART
  • Configurable Power-Saving Modes
  • Crystal or External Clock Input (typically 24 MHz or 36 MHz)
  • Flexible PLL Clock Generators
  • Debug Interface Support
    • IEEE-1149.1 (JTAG) Boundary-Scan-Compatible
    • ETB (Embedded Trace Buffer) with4K-Bytes Trace Buffer memory
    • Device Revision ID Readable by ARM
  • 337-Pin Ball Grid Array (BGA) Package (ZCE Suffix), 0.65-mm Ball Pitch
  • 90nm Process Technology
  • 3.3-V and 1.8-V I/O, 1.3-V Internal
  • Community Resources
    • TI E2E Community
    • TI Embedded Processors Wiki

TMS320DM335ZCE216 Block Diagram
(Picture: Diagram)

Technical Parameters

  • Type
  • Digital Media Applications
  • Core
  • ARM926EJ-S
  • Processor Series
  • DaVinci Video
  • Factory Pack Quantity
  • 1

TMS320DM335ZCE216 Documents

TMS320DM335ZCE216 Related Products

Ratings and Reviews (1)

  • 5 / 5
  • 5 Stars 100%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
  • **yle ***

    Very good, corresponds to my order, . I recommend this seller.

  • Ratings
  • Please rate the product!
Shipping More
Estimated Delivery Time: Jul 31 - Aug 05 days (choose Expedited at checkout).

Shipping & Payment


  • Shipping Type
  • Ship Fee
  • Lead Time
  • $20.00-$40.00 (0.50 KG)
  • 2-5 days
  • $20.00-$40.00 (0.50 KG)
  • 3-7 days
  • $20.00-$45.00 (0.50 KG)
  • 2-5 days
  • $25.00-$65.00 (0.50 KG)
  • 2-5 days
  • $25.00-$45.00 (0.50 KG)
  • 5-14 days
  • $2.00-$3.00 (0.10 KG)
  • 7-30 days

Processing Time:Shipping fee depend on different zone and country.


  • Terms of payment
  • Hand Fee
  • Payment Site
  • charge US$30.00 banking fee.
  • charge 4.0% service fee.
  • charge 3.5% service fee.
  • charge US$0.00 banking fee.
  • charge US$0.00 banking fee.

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.


  • Step1:Product

    Step1: Products

  • Step2:Vacuum packaging

    Step2: Vacuum Packaging

  • Step3:Anti-static bag

    Step3: Anti-Static Bag

  • Step4:Individual packaging

    Step4: Individual Packaging

  • Step5:Packaging boxes

    Step5: Packaging Boxes

  • Step6:bar-code shipping tag

    Step6: Bar-Code Shipping Tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Jotrin ESD packing


1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.


Q: How does Jotrin guarantee that TMS320DM335ZCE216 is the original manufacturer or agent of TI?
We have a professional business development department to strictly test and verify the qualifications of TI original manufacturers and agents. All TI suppliers must pass the qualification review before they can publish their TMS320DM335ZCE216 devices; we pay more attention to the channels and quality of TMS320DM335ZCE216 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
Q: How to find the detailed information of TMS320DM335ZCE216 chips? Including TI original factory information, Digital Signal Processors & Controllers (DSP, DSC) application, TMS320DM335ZCE216 pictures?
You can use Jotrin's intelligent search engine, or filter by Processors ; Digital signal processors (DSP) ; Audio & media processors category, or find it through TI brand manufacturer page.
Q: Are the TI's TMS320DM335ZCE216 price and stock displayed on the platform accurate?
The TI's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for TMS320DM335ZCE216, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
Q: What forms of payment can I use in Jotrin?
TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement of TMS320DM335ZCE216?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the TMS320DM335ZCE216 we delivered, we will accept the replacement or return of the TMS320DM335ZCE216 only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of TMS320DM335ZCE216.
(3)The TMS320DM335ZCE216 is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
Q: How to contact us and get support, such as TMS320DM335ZCE216 datasheet pdf, TMS320DM335 pin diagram?
Need any After-Sales service, please feel free contact us:

Popular Electronic Parts

Certificates & Honor

Certificates & Honor