Images are for reference only.
8bit STM8 Microcontroller, 16MHz, 8 kB Flash, 8-Pin SOIC
Request for Quotation
STM8S001J3M3 Product Details
The STM8S001J3M3 8-bit microcontrollers offer 8 Kbytes of Flash program memory, plus integrated true data EEPROM. It is referred to as low-density device in the STM8S microcontroller family reference manual (RM0016).
The STM8S001J3M3 device provides the following benefits: performance, robustness and reduced system cost.
Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system.
The system cost is reduced thanks to a high system integration level with internal clock oscillators, watchdog, and brown-out reset.
Full documentation is offered as well as a wide choice of development tools.
- 16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline
- Extended instruction set
- Program memory: 8 Kbytes Flash memory; data retention 20 years at 55 °C after 100 cycles
- RAM: 1 Kbyte
- Data memory: 128-byte true data EEPROM; endurance up to 100 k write/erase cycles
- 2.95 V to 5.5 V operating voltage
- Flexible clock control, 3 master clock sources
- External clock input
- Internal, user-trimmable 16 MHz RC
- Internal low-power 128 kHz RC
- Clock security system with clock monitor
- Power management
- Low-power modes (wait, active-halt, halt)
- Switch-off peripheral clocks individually
- Permanently active, low-consumption power-on and power-down reset
- Nested interrupt controller with 32 interrupts
- Up to 5 external interrupts
- Advanced control timer: 16-bit, 2 CAPCOM channels, 2 outputs, dead-time insertion and flexible synchronization
- 16-bit general purpose timer, with 3 CAPCOM channels (IC, OC or PWM)
- 8-bit basic timer with 8-bit prescaler
- Auto wakeup timer
- Window and independent watchdog timers
- UART, SmartCard, IrDA, LIN master mode
- SPI unidirectional interface up to 8 Mbit/s (master simplex mode, slave receiver only)
- I2C interface up to 400 Kbit/s
- 10-bit ADC, ± 1 LSB ADC with up to 3 multiplexed channels, scan mode and analog watchdog
- Internal reference voltage measurement
- Up to 5 I/Os including 4 high-sink outputs
- Highly robust I/O design, immune against current injection
- Embedded single-wire interface module (SWIM) or fast on-chip programming and non-intrusive debugging
- Core Processor
- Core Size
- I2C, IrDA, LINbus, SmartCard, SPI, UART/USART
- Brown-out Detect/Reset, POR, PWM, WDT
- Number of I/O
- Program Memory Size
- 8KB (8K x 8)
- Program Memory Type
- EEPROM Size
- 128 x 8
- RAM Size
- 1K x 8
- Voltage Supply (Vcc/Vdd)
- 2.95V ~ 5.5V
- Data Converters
- A/D 3x10b
- Oscillator Type
- Operating Temperature
- -40??C ~ 125??C (TA)
- Mounting Type
- Surface Mount
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Supplier Device Package
STM8S001J3M3 Related Products
Ratings and Reviews (1)
- 5 / 5
- 5 Stars 100%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
Ware ist schon da, danke, zufrieden M.K.
Estimated Delivery Time: Jul 11 - Jul 16 days (choose Expedited at checkout).
Shipping & Payment
- Shipping Type
- Ship Fee
- Lead Time
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time：Shipping fee depend on different zone and country.
- Terms of payment
- Hand Fee
- Wire Transfer
- charge US$30.00 banking fee.
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step2: Vacuum Packaging
Step3: Anti-Static Bag
Step4: Individual Packaging
Step5: Packaging Boxes
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: How does Jotrin guarantee that STM8S001J3M3 is the original manufacturer or agent of ST?
- We have a professional business development department to strictly test and verify the qualifications of ST original manufacturers and agents. All ST suppliers must pass the qualification review before they can publish their STM8S001J3M3 devices; we pay more attention to the channels and quality of STM8S001J3M3 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of STM8S001J3M3 chips? Including ST original factory information, Microcontrollers application, STM8S001J3M3 pictures?
- You can use Jotrin's intelligent search engine, or filter by STM8 8-bit MCUs ; STM8AF Series ; STM8AF52 category, or find it through STMicroelectronics, Inc Information page.
- Q: Are the ST's STM8S001J3M3 price and stock displayed on the platform accurate?
- The ST's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for STM8S001J3M3, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement of STM8S001J3M3?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the STM8S001J3M3 we delivered, we will accept the replacement or return of the STM8S001J3M3 only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of STM8S001J3M3.
(3)The STM8S001J3M3 is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
- Q: How to contact us and get support, such as STM8S001J3M3 datasheet pdf, STM8S001J3 pin diagram?
- Need any After-Sales service, please feel free contact us: firstname.lastname@example.org
- 1.ST25R3911B - DISCO One-Stop Solution
- 2.Integrated Quad Low Side Switch for All-in-One Solution
- 3.ST parts naming conventions
- 4.Low Power High Precision Distance Measuring Miniature ToF Sensor-VL53L1X
- 5.STMicroelectronics Maximizes Access to High-Performing, Low-Power STM32L4 MCUs with New Development Ecosystem
- 6.Dual core performance, rich functions, ST released a new micro controller
B-L475E-IOT01A2 Discovery Node A2 868MHz Bluetooth Smart (BLE), Near Field Communicati...
STEVAL-IDB007V1M Bluetooth/802.15.1 Development Tools Evaluation platform based on the ...
STEVAL-IDB008V1 Networking Development Tools Evaluation platform based on the BlueNRG-...
LDL1117S50R LDO Regulator Pos 5V 1.2A 4-Pin(3+Tab) SOT-223 T/R
FS32V234CMN1VUB Microprocessor Cortex S32V234 Series, 64bit, 96KB, 1GHz, 950mV to 1.95...
CYW920706WCDEVAL Bluetooth/802.15.1 Development Tools CYW920706WCDEVAL Eval Board