Images are for reference only.
ARM MCU, STM32 Family STM32H7 Series Microcontrollers, ARM Cortex-M7F, 32bit, 400 MHz, 2 MB, 1 MB New
Request for Quotation
STM32H743ZIT6U Product Details
STM32H742xI/G and STM32H743xI/G devices are based on the high-performance Arm® Cortex?-M7 32-bit RISC core operating at up to 480 MHz. The Cortex® -M7 core features a floating point unit (FPU) which supports Arm? double-precision (IEEE 754 compliant) and single-precision data-processing instructions and data types. STM32H742xI/G and STM32H743xI/G devices support a full set of DSP instructions and a memory protection unit (MPU) to enhance application security.
STM32H742xI/G and STM32H743xI/G devices incorporate high-speed embedded memories with a dual-bank Flash memory of up to 2 Mbytes, up to 1 Mbyte of RAM (including 192 Kbytes of TCM RAM, up to 864 Kbytes of user SRAM and 4 Kbytes of backup SRAM), as well as an extensive range of enhanced I/Os and peripherals connected to APB buses, AHB buses, 2x32-bit multi-AHB bus matrix and a multi layer AXI interconnect supporting internal and external memory access.
- 32-bit Arm Cortex-M7 core with double-precision FPU and L1 cache: 16 Kbytes of data and 16 Kbytes of instruction cache; frequency up to 480 MHz, MPU, 1027 DMIPS/ 2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
- Up to 2 Mbytes of Flash memory with read-while-write support
- Up to 1 Mbyte of RAM: 192 Kbytes of TCM RAM (inc. 64 Kbytes of ITCM RAM + 128 Kbytes of DTCM RAM for time critical routines), Up to 864 Kbytes of user SRAM, and 4 Kbytes of SRAM in Backup domain
- Dual mode Quad-SPI memory interface running up to 133 MHz
- Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND Flash memory clocked up to 100 MHz in Synchronous mode
- CRC calculation unit
- ROP, PC-ROP, active tamper
- Up to 168 I/O ports with interrupt capability
- 3 separate power domains which can be independently clock-gated or switched off:
- D1: high-performance capabilities
- D2: communication peripherals and timers
- D3: reset/clock control/power management
- 1.62 to 3.6 V application supply and I/Os
- POR, PDR, PVD and BOR
- Dedicated USB power embedding a 3.3 V internal regulator to supply the internal PHYs
- Embedded regulator (LDO) with configurable scalable output to supply the digital circuitry
- Voltage scaling in Run and Stop mode (6 configurable ranges)
- Backup regulator (~0.9 V)
- Voltage reference for analog peripheral/VREF+
- Low-power modes: Sleep, Stop, Standby and VBAT supporting battery charging
- VBAT battery operating mode with charging capability
- CPU and domain power state monitoring pins
- 2.95 μA in Standby mode (Backup SRAM OFF, RTC/LSE ON)
- Internal oscillators: 64 MHz HSI, 48 MHz HSI48, 4 MHz CSI, 32 kHz LSI
- External oscillators: 4-48 MHz HSE, 32.768 kHz LSE
- 3× PLLs (1 for the system clock, 2 for kernel clocks) with Fractional mode
- Core Processor
- ARM? Cortex?-M7
- Core Size
- CANbus, EBI/EMI, Ethernet, I2C, IrDA, LINbus, MDIO, MMC/SD/SDIO, QSPI, SAI, SPDIF, SPI, SWPMI, UART/USART, USB OTG
- Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT
- Number of I/O
- Program Memory Size
- 2MB (2M x 8)
- Program Memory Type
- RAM Size
- 1M x 8
- Voltage Supply (Vcc/Vdd)
- 1.62V ~ 3.6V
- Data Converters
- A/D 20x16b; D/A 2x12b
- Oscillator Type
- Operating Temperature
- -40??C ~ 85??C (TA)
- Mounting Type
- Surface Mount
- Package / Case
- Supplier Device Package
- 144-LQFP (20x20)
STM32H743ZIT6U Related Products
Ratings and Reviews
- 0 / 5
- 5 Stars 0%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
Estimated Delivery Time: Aug 02 - Aug 07 days (choose Expedited at checkout).
Shipping & Payment
- Shipping Type
- Ship Fee
- Lead Time
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time：Shipping fee depend on different zone and country.
- Terms of payment
- Hand Fee
- Wire Transfer
- charge US$30.00 banking fee.
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step2: Vacuum Packaging
Step3: Anti-Static Bag
Step4: Individual Packaging
Step5: Packaging Boxes
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: How does Jotrin guarantee that STM32H743ZIT6U is the original manufacturer or agent of ST?
- We have a professional business development department to strictly test and verify the qualifications of ST original manufacturers and agents. All ST suppliers must pass the qualification review before they can publish their STM32H743ZIT6U devices; we pay more attention to the channels and quality of STM32H743ZIT6U products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of STM32H743ZIT6U chips? Including ST original factory information, Embedded - Microcontrollers application, STM32H743ZIT6U pictures?
- You can use Jotrin's intelligent search engine, or filter by STM32 32-bit Arm Cortex MCUs ; STM32 High Performance MCUs ; STM32F4 Series category, or find it through STMicroelectronics, Inc Information page.
- Q: Are the ST's STM32H743ZIT6U price and stock displayed on the platform accurate?
- The ST's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for STM32H743ZIT6U, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement of STM32H743ZIT6U?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the STM32H743ZIT6U we delivered, we will accept the replacement or return of the STM32H743ZIT6U only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of STM32H743ZIT6U.
(3)The STM32H743ZIT6U is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
- Q: How to contact us and get support, such as STM32H743ZIT6U datasheet pdf, STM32H743ZI pin diagram?
- Need any After-Sales service, please feel free contact us: firstname.lastname@example.org
- 1.ST parts naming conventions
- 2.Low Power High Precision Distance Measuring Miniature ToF Sensor-VL53L1X
- 3.STMicroelectronics Maximizes Access to High-Performing, Low-Power STM32L4 MCUs with New Development Ecosystem
- 4.Dual core performance, rich functions, ST released a new micro controller
- 5.New Intelligent Power Modules from STMicroelectronics Enable Greener and More Reliable Appliances
- 6.STMicroelectronics Announces Timing for Fourth Quarter / Full-Year 2015 Earnings Release and Conference Call
STM32F302RBT7 MCU 32Bit STM32 ARM Cortex M4 RISC 128KB Flash 2.5V/3.3V 64Pin LQFP Tr...
STM32H755ZIT6 HIGH-PERFORMANCE AND DSP WITH DP
BT815Q-T Video Processor, Security, Multi-function Printers, Tele Conference Sy...
R5F1026AASP#V5 Microcontroller, RL78 Family, RL78/G1x Series, RL78/G12 Group Microcon...
LPC804M101JHI33Y LPC804M101JHI33/HVQFN32///REEL 13 Q1/T1 *STANDARD
UPD78F1009GA-HAB-AX MCU 16Bit 78K CISC 64KB Flash 3.3V/5V 64Pin TQFP