Products > Integrated Circuits (ICs) > Embedded Processors & Controllers > STM32F723ZCI6
  • STM32F723ZCI6
  • STM32F723ZCI6 0
Images are for reference only.


ARM MCU, STM32 Family STM32F7 Series Microcontrollers, ARM Cortex-M7, 32bit, 216 MHz, 256 KB

Manufacturer :
STMicroelectronics, Inc
Package/Case :
Product Categories :
Embedded - Microcontrollers
RoHs Status:
Lead free / RoHS Compliant

Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.

STM32F723ZCI6 Product Details

The STM32F723ZCI6 from STMicroelectronics is a STM32F723xx series high performance ARM® Cortex®-M7 32bit microcontroller in 144 pin UGBGA package. The Cortex®-M7 core features a single floating point unit (SFPU) precision which supports ARM single precision data processing instructions and data types. It also implements a full set of DSP instructions and memory protection unit (MPU) which enhances application security. The device embeds high speed memories with 256Kbyte flash, 256Kbytes of SRAM (including 64Kbytes of data TCM RAM), 16Kbytes of instruction TCM RAM (for critical real-time routines), 4Kbytes of back-up SRAM and an extensive range of enhanced I/Os and peripherals connected to 2 APB buses, 2 AHB buses, 32bit multi-AHB bus matrix and multi layer AXI interconnect supporting internal and external memories access. It features 2 advanced control, 10 general purpose, 2 basic, 1 low power timers. It also features 112 GPIO, three 12bit ADC (24 ch), two 12bit DAC.


  • Frequency up to 216MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1) and DSP instructions
  • 1.7V to 3.6V power supply, -40°C to 85°C operating temperature range
  • 5/3 (simplex) SPI/I2S, 3 I2C, 4/4 USART/UART, USB OTG FS, USB OTG HS, USBPHYC, CAN, 2 SAI interfaces
  • 16-stream DMA controller and RTC (subsecond accuracy, hardware calendar)
  • 4 to 26MHz crystal oscillator, internal 16MHz factory trimmed RC (1% accuracy)
  • Dual mode quad SPI, 32KHz oscillator for RTC with calibration, internal 32KHz RC with calibration
  • Low power (sleep, stop and standby modes), FMC memory controller, SDMMC1, SDMMC2 interfaces
  • True random number generator, CRC calculation unit, 96bit unique ID
  • Debug mode (SWD and JTAG interfaces, Cortex®-M7 Trace Macrocell™)
  • Readout protection, write protection, proprietary code readout protection


Embedded Design & Development, Motor Drive & Control, Medical, Industrial, Consumer Electronics, Portable Devices, Audio

STM32F723ZCI6 Block Diagram
(Picture: Diagram)

Technical Parameters

Core Processor ARM? Cortex?-M7 RAM Size 256K x 8
Core Size 32-Bit Voltage Supply (Vcc/Vdd) 1.7V ~ 3.6V
Speed 216MHz Data Converters A/D 24x12b; D/A 2x12b
Connectivity CANbus, EBI/EMI, I2C, IrDA, LINbus, MMC/SD, QSPI, SAI, SPI, UART/USART, USB Oscillator Type Internal
Peripherals Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT Operating Temperature -40??C ~ 85??C (TA)
Number of I/O 112 Mounting Type Surface Mount
Program Memory Size 256KB (256K x 8) Package / Case 144-UFBGA
Program Memory Type FLASH Supplier Device Package 144-UFBGA (7x7)

STM32F723ZCI6 Related Products

Ratings and Reviews (0)

  • 0 / 5
  • 5 Stars 0%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
  • Ratings
  • Please rate the product!
Shipping More
Estimated Delivery Time: Dec 06 - Dec 11 days (choose Expedited at checkout).

Shipping & Payment


Shipping Type Ship Fee Lead Time

$20.00-$40.00 (0.50 KG)

2-5 days

$20.00-$40.00 (0.50 KG)

3-7 days

$20.00-$45.00 (0.50 KG)

2-5 days

$25.00-$65.00 (0.50 KG)

2-5 days

$25.00-$45.00 (0.50 KG)

5-14 days

$2.00-$3.00 (0.10 KG)

7-30 days

Processing Time:Shipping fee depend on different zone and country.


Terms of payment Hand Fee Payment Site
Wire Transfer

charge US$30.00 banking fee.


charge 4.0% service fee.
Credit Card

charge 3.5% service fee.

Western Union

charge US$0.00 banking fee.
Money Gram

charge US$0.00 banking fee.

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.


  • Step1:Product


  • Step2:Vacuum packaging

    Step2:Vacuum packaging

  • Step3:Anti-static bag

    Step3:Anti-static bag

  • Step4:Individual packaging

    Step4:Individual packaging

  • Step5:Packaging boxes

    Step5:Packaging boxes

  • Step6:bar-code shipping tag

    Step6:bar-code shipping tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.


1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.


Q: What are the advantages of buying from Jotrin?
Jotrin is your second procurement department of the electronic components. The platform has supported by over 1000 original factories and authorized agents, over 10 years of experience in the electronic components area. Jotrin is aiming to help these manufacturers, EMS, PCBA clients offer a whole BOM solution with the assistant of their professional BOM team and Intelligent BOM software. We can help you:
1. Do the cost down for your current regular orders.
2. Decrease your suppliers' management costs and suppliers' qty.
3. Improve your efficiency, we can offer the whole BOM one-stop supply chain service.
Q: How can Jotrin guarantee to be the original manufacturers or the agents?
We have a professional business development department to strictly examine and verify the qualifications of the original manufacturers and the agents. All the suppliers must pass the qualification examination before putting their materials on the shelves; We pay more attention to the channel and quality of products than any other customers, we are strict with supplier audit, you can rest assured that choice.
Q: What are the business hours of Jotrin?
Although we accept quotation requests and orders anytime 24 hours a day regardless of business days and hours, we provide quotations and process orders during business time.
Business Hours: Monday - Friday 9:00am - 9:00pm (GMT+8)
Q: Is the inventory and price seen on the platform accurate?
Inventory fluidity big, unable to update in time, it will be updated periodically within 24 hours. After placing the order, it is suggested to confirm the order with the supplier or the online customer service of Jotrin before paying.
Q: Can I place an order offline?
Yes. We accept offline orders.
You can contact our customer service representatives to help you customize your requirements.
If you'd like to submit your purchase orders via email, please send us a note to One of our customer service representatives will help you.
Q: What forms of payment can I use in Jotrin?
TT Bank, Western Union, Paypal, and Escrow is all acceptable.
Q: How is the shipping arranged?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail. No shipment handling charges be included.
Q: How can I track my package?
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status of your order and its tracking number, if applicable. When the tracking numbers are present, you can click on the link and it will take you directly to the carriers' website so that you can track your order. Note: It may take up to 24 hours before carriers will display tracking information.
Q: When can I receive my package?
In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the product we delivered, we will accept the replacement or return of the product only when all of the below conditions are fulfilled: (1)There are any problems with the product we delivered, such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of the product.
(3)The product is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy
Q: How to contact us and get support?
Need any After-Sales service, please feel free contact us:


ST Microelectronics is a global independent semiconductor company and a leader in developing and delivering semiconductor solutions across the spectrum of microelectronics applications, and that desig...

Certificates & Honor

Certificates & Honor