Products > Integrated Circuits (ICs) > SSM2142P

Images are for reference only.

SSM2142P

Hot Sale

Balanced Line Driver

  • Package/Case :
  • LCC21
  • Product Categories :
  • Audio Amplifiers ; Audio Line Drivers and Receivers
  • RoHs Status:
  • Lead free / RoHS Compliant
  • In-stock:
  • 350

Quantity  

Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.


SSM2142P Product Details

The SSM2142P is an integrated differential-output buffer amplifier that converts a single-ended input signal to a balanced output signal pair with high output drive. By utilizing low noise thermally matched thin film resistors and high slew rate amplifiers, the SSM2142P helps maintain the sonic quality of audio systems by eliminating power line hum, RF interference, voltage drops, and other externally generated noise commonly encountered with long audio cable runs. Excellent rejection of common-mode noise and offset errors is achieved by laser trimming of the onboard resistors, assuring high gain accuracy. The carefully designed output stage of the SSM2142P is capable of driving difficult loads, yielding low distortion performance despite extremely long cables or loads as low as 600 Ohm, and is stable over a wide range of operating conditions.

Based on a cross-coupled, electronically balanced topology, the SSM2142P mimics the performance of fully balanced transformer-based solutions for line driving. However, the SSM2142P maintains lower distortion and occupies much less board space than transformers while achieving comparable common-mode rejection performance with reduced parts count.

The SSM2142P in tandem with the SSM2141 differential receiver establishes a complete, reliable solution for driving and receiving audio signals over long cables. The SSM2141 features an Input Common-Mode Rejection Ratio of 100 dB at 60 Hz. Specifications demonstrating the performance of this typical system are included in the data sheet.

SSM2142P

Feature

  • Transformer-Like Balanced Output
  • Drives 10 V RMS Into a 600 Ω Load
  • Stable When Driving Large Capacitive Loads and LongCables
  • Low Distortion0.006% typ 20 Hz–20 kHz, 10 V RMS into 600 Ω
  • High Slew Rate15 V/µs typ
  • Low Gain Error(Differential or Single-Ended); 0.7% typ
  • Outputs Short-Circuit Protected
  • Available In Space-Saving 8-Pin Mini-DIP Package
  • Low Cost

SSM2142P Products

SSM2142P Block Diagram
(Picture: Diagram)

Technical Parameters

  • CMRRtyp | dB
  • 45
  • Gainmin | dB
  • 5.8
  • Gainmax | dB
  • 6
  • Gain Error%
  • 0.7
  • Slew Ratetyp | V/us
  • 15
  • Vs+min | V
  • 5
  • Vs+max | V
  • 18
  • Ismax | A
  • 7m
  • THD+N in %typ | %
  • 0.006

SSM2142P Documents

  • SSM2142 Technical Documentation/Data sheet

SSM2142P Related Products

Ratings and Reviews (1)

  • 5 / 5
  • 5 Stars 100%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
  • **evin***
    2020-02-28

    Thanks for a great transaction,hope to deal with you again A1+

Reviews
  • Ratings
  • Please rate the product!
Payment:
Payment
Shipping:
Shipping More
Estimated Delivery Time: Dec 02 - Dec 07 days (choose Expedited at checkout).

Shipping & Payment

Shipping

  • Shipping Type
  • Ship Fee
  • Lead Time
  • $20.00-$40.00 (0.50 KG)
  • 2-5 days
  • $20.00-$40.00 (0.50 KG)
  • 3-7 days
  • $20.00-$45.00 (0.50 KG)
  • 2-5 days
  • $25.00-$65.00 (0.50 KG)
  • 2-5 days
  • $25.00-$45.00 (0.50 KG)
  • 5-14 days
  • $2.00-$3.00 (0.10 KG)
  • 7-30 days

Processing Time:Shipping fee depend on different zone and country.


Payment

  • Terms of payment
  • Hand Fee
  • Payment Site
  • charge US$30.00 banking fee.
  • charge 4.0% service fee.
  • https://www.paypal.com/
  • charge 3.5% service fee.
  • charge US$0.00 banking fee.
  • https://www.westernunion.com/
  • charge US$0.00 banking fee.
  • http://global.moneygram.com/

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.

Packing

  • Step1:Product

    Step1: Products

  • Step2:Vacuum packaging

    Step2: Vacuum Packaging

  • Step3:Anti-static bag

    Step3: Anti-Static Bag

  • Step4:Individual packaging

    Step4: Individual Packaging

  • Step5:Packaging boxes

    Step5: Packaging Boxes

  • Step6:bar-code shipping tag

    Step6: Bar-Code Shipping Tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Jotrin ESD packing

Guarantees

1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.

FAQ:

Q: How does Jotrin guarantee that SSM2142P is the original manufacturer or agent of AD?
We have a professional business development department to strictly test and verify the qualifications of AD original manufacturers and agents. All AD suppliers must pass the qualification review before they can publish their SSM2142P devices; we pay more attention to the channels and quality of SSM2142P products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
Q: How to find the detailed information of SSM2142P chips? Including AD original factory information, Audio Amplifiers ; Audio Line Drivers and Receivers application, SSM2142P pictures?
You can use Jotrin's intelligent search engine, or filter by Audio Amplifiers ; Audio Line Drivers and Receivers category, or find it through Analog Devices, Inc Information page.
Q: Are the AD's SSM2142P price and stock displayed on the platform accurate?
The AD's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for SSM2142P, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
Q: What forms of payment can I use in Jotrin?
TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement of SSM2142P?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the SSM2142P we delivered, we will accept the replacement or return of the SSM2142P only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of SSM2142P.
(3)The SSM2142P is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
Q: How to contact us and get support, such as SSM2142P datasheet pdf, SSM2142 pin diagram?
Need any After-Sales service, please feel free contact us: sales@jotrin.com

Analog Devices, Inc

AD
Analog Devices, Inc. was founded by two MIT graduates, Ray Stata and Matthew Lorber in 1965. The same year, the company released its first product, the model 101 op amp, which was a hockey-puck sized module used in test and measurement equipment. In 1967, the company published the first issue of its...
  • SSM2141
    SSM2141 High Common-Mode Rejection Differential Line Receiver (common mode rej...
  • SSM2141PZ
    SSM2141PZ High Common-Mode Rejection Differential Line Receiver; Package: PDIP; ...
  • SSM2141SZ
    SSM2141SZ High Common-Mode Rejection Differential Line Receiver; Package: SOIC; ...
  • SSM2135SZ
    SSM2135SZ Audio Power Amplifier, AB, 2 Channel, ± 2V to ± 18V, SOIC, 8 Pins
  • SSM2141P
    SSM2141P High Common-Mode Rejection Differential Line Receiver
  • SSM2141S
    SSM2141S High Common-Mode Rejection Differential Line Receiver

Certificates & Honor

Certificates & Honor