Products > Integrated Circuits (ICs) > Counter ICs > SN74LS191DG4
SN74LS191DG4 SOIC-16
TI
  • SN74LS191DG4
Images are for reference only.

SN74LS191DG4

Counter ICs Sync 4B Up Down Counters

Manufacturer :
Texas Instruments, Inc
Package/Case :
SOIC-16
Product Categories :
Counter ICs
Datasheet:
SN74LS191DG4 PDF
RoHs Status:
Rohs
In-stock:
200

Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.


SN74LS191DG4 Product Details

The '190, 'LS190, '191, and 'LS191 are synchronous, reversible up/down counters having a complexity of 58 equivalent gates. The '191 and 'LS191 are 4-bit binary counters and the '190 and 'LS190 are BCD counters. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other when so instructed by the steering logic. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple clock) counters.

The outputs of the four master-slave flip-flops are triggered on a low-to-high transition of the clock input if the enable input is low. A high at the enable input inhibits counting. Level changes at the enable input should be made only when the clock input is high. The direction of the count is determined by the level of the down/up input. When low, the counter count up and when high, it counts down. A false clock may occur if the down/up input changes while the clock is low. A false ripple carry may occur if both the clock and enable are low and the down/up input is high during a load pulse.

These counters are fully programmable; that is, the outputs may be preset to either level by placing a low on the load input and entering the desired data at the data inputs. The output will change to agree with the data inputs independently of the level of the clock input. This feature allows the counters to be used as modulo-N dividers by simply modifying the count length with the preset inputs.

The clock, down/up, and load inputs are buffered to lower the drive requirement which significantly reduces the number of clock drivers, etc., required for long parallel words.

Two outputs have been made available to perform the cascading function: ripple clock and maximum/minimum count. The latter output produces a high-level output pulse with a duration approximately equal to one complete cycle of the clock when the counter overflows or underflows. The ripple clock output produces a low-level output pulse equal in width to the low-level portion of the clock input when an overflow or underflow condition exists. The counters can be easily cascaded by feeding the ripple clock output to the enable input of the succeeding counter if parallel clocking is used, or to the clock input if parallel enabling is used. The maximum/minimum count output can be used to accomplish look-ahead for high-speed operation.

Series 54' and 54LS' are characterized for operation over the full military temperature range of -55°C to 125°C; Series 74' and 74LS' are characterized for operation from 0°C to 70°C.

Feature

  • Counts 8-4-2-1 BCD or Binary
  • Single Down/Up Count Control Line
  • Count Enable Control Input
  • Ripple Clock Output for Cascading
  • Asynchronously Presettable with Load Control
  • Parallel Outputs
  • Cascadable for n-Bit Applications

Technical Parameters

Counter Type Binary Counters Operating Supply Voltage 4.75 V to 5.25 V
Logic Family TTL Package / Case SOIC-16
Number of Bits 4 Packaging Tube
Counting Method Synchronous Mounting Style SMD/SMT
Counting Sequence Up/Down Factory Pack Quantity 40

SN74LS191DG4 Documents

SN74LS191DG4 Related Products

Ratings and Reviews (0)

  • 0 / 5
  • 5 Stars 0%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
Reviews
  • Ratings
  • Please rate the product!
Payment:
Payment
Shipping:
Shipping More
Estimated Delivery Time: Nov 30 - Dec 05 days (choose Expedited at checkout).

Shipping & Payment

Shipping

Shipping Type Ship Fee Lead Time
DHL

$20.00-$40.00 (0.50 KG)

2-5 days
Fedex

$20.00-$40.00 (0.50 KG)

3-7 days
UPS

$20.00-$45.00 (0.50 KG)

2-5 days
TNT

$25.00-$65.00 (0.50 KG)

2-5 days
EMS

$25.00-$45.00 (0.50 KG)

5-14 days
REGISTERED AIR MAIL

$2.00-$3.00 (0.10 KG)

7-30 days

Processing Time:Shipping fee depend on different zone and country.


Payment

Terms of payment Hand Fee Payment Site
Wire Transfer

charge US$30.00 banking fee.

Paypal

charge 4.0% service fee.

https://www.paypal.com/
Credit Card

charge 3.5% service fee.

Western Union

charge US$0.00 banking fee.

https://www.westernunion.com/
Money Gram

charge US$0.00 banking fee.

http://global.moneygram.com/

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.

Packing

  • Step1:Product

    Step1:Product

  • Step2:Vacuum packaging

    Step2:Vacuum packaging

  • Step3:Anti-static bag

    Step3:Anti-static bag

  • Step4:Individual packaging

    Step4:Individual packaging

  • Step5:Packaging boxes

    Step5:Packaging boxes

  • Step6:bar-code shipping tag

    Step6:bar-code shipping tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Guarantees

1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.

FAQ:

Q: What are the advantages of buying from Jotrin?
Jotrin is your second procurement department of the electronic components. The platform has supported by over 1000 original factories and authorized agents, over 10 years of experience in the electronic components area. Jotrin is aiming to help these manufacturers, EMS, PCBA clients offer a whole BOM solution with the assistant of their professional BOM team and Intelligent BOM software. We can help you:
1. Do the cost down for your current regular orders.
2. Decrease your suppliers' management costs and suppliers' qty.
3. Improve your efficiency, we can offer the whole BOM one-stop supply chain service.
Q: How can Jotrin guarantee to be the original manufacturers or the agents?
We have a professional business development department to strictly examine and verify the qualifications of the original manufacturers and the agents. All the suppliers must pass the qualification examination before putting their materials on the shelves; We pay more attention to the channel and quality of products than any other customers, we are strict with supplier audit, you can rest assured that choice.
Q: What are the business hours of Jotrin?
Although we accept quotation requests and orders anytime 24 hours a day regardless of business days and hours, we provide quotations and process orders during business time.
Business Hours: Monday - Friday 9:00am - 9:00pm (GMT+8)
Q: Is the inventory and price seen on the platform accurate?
Inventory fluidity big, unable to update in time, it will be updated periodically within 24 hours. After placing the order, it is suggested to confirm the order with the supplier or the online customer service of Jotrin before paying.
Q: Can I place an order offline?
Yes. We accept offline orders.
You can contact our customer service representatives to help you customize your requirements.
If you'd like to submit your purchase orders via email, please send us a note to sales@jotrin.com. One of our customer service representatives will help you.
Q: What forms of payment can I use in Jotrin?
TT Bank, Western Union, Paypal, and Escrow is all acceptable.
Q: How is the shipping arranged?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail. No shipment handling charges be included.
Q: How can I track my package?
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status of your order and its tracking number, if applicable. When the tracking numbers are present, you can click on the link and it will take you directly to the carriers' website so that you can track your order. Note: It may take up to 24 hours before carriers will display tracking information.
Q: When can I receive my package?
In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the product we delivered, we will accept the replacement or return of the product only when all of the below conditions are fulfilled: (1)There are any problems with the product we delivered, such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of the product.
(3)The product is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy
Q: How to contact us and get support?
Need any After-Sales service, please feel free contact us: sales@jotrin.com

TI

TI
Texas Instruments Incorporated designs and manufactures analog technologies, digital signal processing (DSP) and microcontroller (MCU) semiconductors. TI is a leader in semiconductor solutions for ana...
  • SN74LS181NE4
    SN74LS181NE4 ARITHMETIC LOGIC UNITS/FUNCTION GENERATORS,Aritmetik-logikenhet (ALU) Arith Logic Unit/ Function Generator
  • SN74LS181N
    SN74LS181N 4-BIT ARITHMETIC LOGIC UNIT,Aritmetik-logikenhet (ALU) Arith Logic Unit/ Function Generator
  • SN74LS175DRE4
    SN74LS175DRE4 HEX/QUADRUPLE D-TYPE FLIP-FLOPS WITH CLEAR,Flip Flops Quadruple D-Type Flip-Flop W/Clear
  • SN74LS175NSRE4
    SN74LS175NSRE4 HEX/QUADRUPLE D-TYPE FLIP-FLOPS WITH CLEAR,Flip Flops Quadruple D-Type Flip-Flop W/Clear
  • SN74LS175NSRG4
    SN74LS175NSRG4 HEX/QUADRUPLE D-TYPE FLIP-FLOPS WITH CLEAR,Flip Flops Quad D Type FlipFlop
  • SN74LS175N
    SN74LS175N Flip Flop D-Type Bus Interface Pos-Edge 1-Element 16-Pin PDIP Tube

Certificates & Honor

Certificates & Honor