Counter ICs Synch 8B Up DWN Counters
Request for Quotation
SN74AS867DWG4 Product Details
These synchronous, presettable, 8-bit up/down counters feature internal-carry look-ahead circuitry for cascading in high-speed counting applications. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincidentally with each other when so instructed by the count-enable (,) inputs and internal gating. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple-clock) counters. A buffered clock (CLK) input triggers the eight flip-flops on the rising (positive-going) edge of the clock waveform.
These counters are fully programmable; they may be preset to any number between 0 and 255. The load-input circuitry allows parallel loading of the cascaded counters. Because loading is synchronous, selecting the load mode disables the counter and causes the outputs to agree with the data inputs after the next clock pulse.
The carry look-ahead circuitry provides for cascading counters for n-bit synchronous applications without additional gating. Two count-enable (and ) inputs and a ripple-carry () output are instrumental in accomplishing this function. Bothand must be low to count. The direction of the count is determined by the levels of the select (S0, S1) inputs as shown in the function table. is fed forward to enable .thus enabled produces a low-level pulse while the count is zero (all outputs low) counting down or 255 counting up (all outputs high). This low-level overflow-carry pulse can be used to enable successive cascaded stages. Transitions atand are allowed regardless of the level of CLK. All inputs are diode clamped to minimize transmission-line effects, thereby simplifying system design.
These counters feature a fully independent clock circuit. With the exception of the asynchronous clear on the SN74ALS867A and ′AS867, changes at S0 and S1 that modify the operating mode have no effect on the Q outputs until clocking occurs. For the ′AS867 and ′AS869, any time ENP\ and/or ENT\ is taken high,either goes or remains high. For the SN74ALS867A and SN74ALS869, any time is taken high,either goes or remains high. The function of the counter (whether enabled, disabled, loading, or counting) is dictated solely by the conditions meeting the stable setup and hold times.
The SN54AS867 and SN54AS869 are characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ALS867A, SN74ALS869, SN74AS867, and SN74AS869 are characterized for operation from 0°C to 70°C.
- Fully Programmable With Synchronous Counting and Loading
- SN74ALS867A and ′AS867 Have Asynchronous Clear;SN74ALS869 and ′AS869 Have Synchronous Clear
- Fully Independent Clock Circuit Simplifies Use
- Ripple-Carry Output for n-Bit Cascading
- Package Options Include Plastic Small-Outline (DW) Packages,Ceramic Chip Carriers (FK), and Standard Plastic (NT) and Ceramic(JT) 300-mil DIPs
|Counter Type||Binary Counters||Operating Supply Voltage||4.5 V to 5.5 V|
|Logic Family||TTL||Package / Case||SOIC-24|
|Number of Bits||8||Packaging||Tube|
|Counting Method||Asynchronous||Mounting Style||SMD/SMT|
|Counting Sequence||Up/Down||Factory Pack Quantity||25|
SN74AS867 Family Datasheet
SN74AS867DWG4 Related Products
Ratings and Reviews
- 0 / 5
- 5 Stars 0%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
Estimated Delivery Time: Jan 28 - Feb 02 days (choose Expedited at checkout).
Shipping & Payment
|Shipping Type||Ship Fee||Lead Time|
$20.00-$40.00 (0.50 KG)
$20.00-$40.00 (0.50 KG)
$20.00-$45.00 (0.50 KG)
$25.00-$65.00 (0.50 KG)
$25.00-$45.00 (0.50 KG)
|REGISTERED AIR MAIL||
$2.00-$3.00 (0.10 KG)
Processing Time：Shipping fee depend on different zone and country.
|Terms of payment||Hand Fee||Payment Site|
charge US$30.00 banking fee.
charge 4.0% service fee.
charge 3.5% service fee.
charge US$0.00 banking fee.
charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step6:bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: How does Jotrin guarantee that SN74AS867DWG4 is the original manufacturer or agent of TI?
- We have a professional business development department to strictly test and verify the qualifications of TI original manufacturers and agents. All TI suppliers must pass the qualification review before they can publish their SN74AS867DWG4 devices; we pay more attention to the channels and quality of SN74AS867DWG4 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of SN74AS867DWG4 chips? Including TI original factory information, Counter ICs application, SN74AS867DWG4 pictures?
- You can use Jotrin's intelligent search engine, or filter by Semiconductors ; Logic ; Specialty logic category, or find it through Texas Instruments, Inc Information page.
- Q: Are the TI's SN74AS867DWG4 price and stock displayed on the platform accurate?
- The TI's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for SN74AS867DWG4, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
- Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement of SN74AS867DWG4?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the SN74AS867DWG4 we delivered, we will accept the replacement or return of the SN74AS867DWG4 only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of SN74AS867DWG4.
(3)The SN74AS867DWG4 is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
- Q: How to contact us and get support, such as SN74AS867DWG4 datasheet pdf, SN74AS867 pin diagram?
- Need any After-Sales service, please feel free contact us: firstname.lastname@example.org
Texas Instruments, Inc
- 1.Introduction to Digital Signal Processor
- 2.How to use LM3886 DIY Gainclone power amplifier
- 3.Design of Software Phase-locking Based on DSP2812
- 4.The design of intelligent instrument based on DSP device TMS320C32 and CPLD chip
- 5.Design of audio signal acquisition system based on TMS320C6713
- 6.Gate Drivers and NexFET Power Blocks deliver 700 W of power
SN74AS257NSR Quadruple 2-Line to 1-Line Data Selectors/Multiplexers With 3-State Outputs 16-SO 0 to 70,Encoders,Decoders,Multiplexers & Demultiplexers Quad 2-to-1 Data Slct/Mltpx W/3St Otp
SN74AS00N NAND Gate, 74AS00, 2 Input, 20 mA, 4.5 V to 5.5 V, DIP-14 New
SN74AS04N Inverter, 74AS04, 1 Input, 20 mA, 4.5 V to 5.5 V, DIP-14 New
SN74ALVTH32374KR 2.5-V/3.3-V 32-Bit Edge-Triggered D-Type Flip-Flops With 3-State Outputs 96-LFBGA -40 to 85,Flip Flops 2.5/3.3V 32bit
SN74AS245NSR OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS,Bus Transceivers Octal Bus Trnscvrs With 3-State Outputs
SN74AS756DW OCTAL BUFFERS AND LINE DRIVERS WITH OPEN-COLLECTOR OUTPUTS,Inverters Octal Buffer/Line Driver