Products > Integrated Circuits (ICs) > Embedded Processors & Controllers > SAM3S2A
SAM3S2A
ATMEL
Images are for reference only.

SAM3S2A

ARM Cortex-M3 RISC Processor

Manufacturer :
ATMEL Corporation (Microchip Technology)
Product Categories :
Microprocessors , ARM
Datasheet:
SAM3S2A PDF
RoHs Status:
Lead free / RoHS Compliant
In-stock:
1078

Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.


SAM3S2A Product Details

ARM Cortex-M3 RISC Processor The SAM3S2A is a member of Atmel\'s SAMS3 series family of microcontrollers based on the high performance 32-bit ARM Cortex-M3 RISC processor. It operates at a maximum speed of 64 MHz and features 128 Kbytes of Flash and 32 Kbytes of SRAM. The peripheral set includes a Full Speed USB Device port with embedded transceiver, an External Bus Interface with NAND Flash controller, 1xUSART, 2xUARTS, 2xTWIs, 2xSPIs, an I2S, as well as 1 PWM timer, 6x16-bit timers, an RTC, a 12-bit ADC and an analog comparator. The SAM3S2A is a medium range general purpose

Features

� ARM� Cortex�-M3 revision 2.0 running to 64 MHz � Memory Protection Unit (MPU) � Thumb�-2 instruction set Pin-to-pin compatible with AT91SAM7S legacy products (48- and 64-pin versions) Memories � From to 256 Kbytes embedded Flash, 128-bit wide access, memory accelerator, single plane � From to 48 Kbytes embedded SRAM � 16 Kbytes ROM with embedded bootloader routines (UART, USB) and IAP routines � 8-bit Static Memory Controller (SMC): SRAM, PSRAM, NOR and NAND Flash support � Memory Protection Unit (MPU) System � Embedded voltage regulator for single supply operation � Power-on-Reset (POR), Brown-out Detector (BOD) and Watchdog for safe operation � Quartz or ceramic resonator oscillators: to 20 MHz main power with Failure Detection and optional low power 32.768 kHz for RTC or device clock � High precision 8/12 MHz factory trimmed internal RC oscillator with 4 MHz default frequency for device startup. In-application trimming access for frequency adjustment � Slow Clock Internal RC oscillator as permanent low-power mode device clock � Two PLLs to 130 MHz for device clock and for USB � Temperature Sensor to 22 peripheral DMA (PDC) channels Low Power Modes � Sleep and Backup modes, down �A in Backup mode � Ultra low power RTC Peripherals � USB 2.0 Device: 12 Mbps, 2668 byte FIFO, to 8 bidirectional Endpoints. On-Chip Transceiver to 2 USARTs with ISO7816, IrDA�, RS-485, SPI, Manchester and Modem Mode � Two 2-wire UARTs to 2 Two Wire Interface (I2C compatible), 1 SPI, 1 Serial Synchronous Controller (I2S), 1 High Speed Multimedia Card Interface (SDIO/SD Card/MMC) to 6 Three-Channel 16-bit Timer/Counter with capture, waveform, compare and PWM mode. Quadrature Decoder Logic and 2-bit Gray Up/Down Counter for Stepper Motor 4-channel 16-bit PWM with Complementary Output, Fault Input, 12-bit Dead Time Generator Counter for Motor Control � 32-bit Real-time Timer and RTC with calendar and alarm features 15-channel, 1Msps ADC with differential input mode and programmable gain stage � One 12-bit 1Msps DAC � One Analog Comparator with flexible input selection, Selectable input hysteresis � 32-bit Cyclic Redundancy Check Calculation Unit (CRCCU) I/O to 79 I/O lines with external interrupt capability (edge or level sensitivity), debouncing, glitch filtering and on-die Series Resistor Termination � Three 32-bit Parallel Input/Output Controllers, Peripheral DMA assisted Parallel Capture Mode Packages � 100-lead LQFP, x 14 mm, pitch 0.5 mm/100-ball LFBGA, x 9 mm, pitch � 64-lead LQFP, x 10 mm, pitch 0.5 mm/64-pad QFN 9x9 mm, pitch � 48-lead LQFP, x 7 mm, pitch 0.5 mm/48-pad QFN 7x7 mm, pitch 0.5 mm

NOTE: This is a summary document. The complete document is available on the Atmel website at www.atmel.com.

Atmel's SAM3S series is a member of a family of Flash microcontrollers based on the high performance 32-bit ARM Cortex-M3 RISC processor. It operates at a maximum speed of 64 MHz and features to 256 Kbytes of Flash and to 48 Kbytes of SRAM. The peripheral set includes a Full Speed USB Device port with embedded transceiver, a High Speed MCI for SDIO/SD/MMC, an External Bus Interface featuring a Static Memory Controller providing connection to SRAM, PSRAM, NOR Flash, LCD Module and NAND Flash, 2x USARTs, 2x UARTs, 2x TWIs, 3x SPI, I2S, as well as 1 PWM timer, 6x general-purpose 16-bit timers, an RTC, a ADC, a 12-bit DAC and an analog comparator. The SAM3S series is ready for capacitive touch thanks to the QTouch library, offering an easy way to implement buttons, wheels and sliders The SAM3S device is a medium range general purpose microcontroller with the best ratio in terms of reduced power consumption, processing power and peripheral set. This enables the SAM3S able to sustain a wide range of applications including consumer, industrial control, and PC peripherals. It operates from to 3.6V and is available 48-, 64- and 100-pin QFP, 48- and 64-pin QFN, and 100-pin BGA packages. The SAM3S series is the ideal migration path from the SAM7S series for applications that require more performance. The SAM3S series is pin-to-pin compatible with the SAM7Sseries.

The SAM3S series devices differ in memory size, package and features list. Table 1-1 below summarizes the configurations of the device family

Timer Counter Channels 6 UART/ USARTs 2/2(1) 12-bit DAC Output 2 External Bus Interface 8-bit data, 4 chip selects, 24-bit address 8-bit data, 4 chip selects, 24-bit address 8-bit data, 4 chip selects, 24-bit address -

Flash 256 Kbytes single plane 256 Kbytes single plane 256 Kbytes single plane 128 Kbytes single plane 128 Kbytes single plane 128 Kbytes single plane 64 Kbytes single plane 64 Kbytes single plane 64 Kbytes single plane

HSMCI 1 port 4 bits 1 port 4 bits 1 port 4 bits 1 port 4 bits 1 port 4 bits 1 port 4 bits -

JTAG & Serial Wire Flash Unique Identifier
RTT RTC POR RSTC SM Peripheral Bridge 2668 USB 2.0 Bytes Full FIFO Speed
PIOA / PIOB / PIOC PWML[0:3] PWMFI0 ADTRG AD[0..14] ADVREF DAC0 DAC1 DATRG

NCS2 NCS3 NRD NWE NANDOE NANDWE NWAIT PIODCEN1 PIODCEN2 PIODCCLK NPCS2 NPCS3 MISO MOSI SPCK RK RF MCCK MCCDA MCDA[0..3]

PDC USART1 PDC Timer Counter A TC[0..2] SPI Timer Counter B TC[3..5] PWM PDC Temp. Sensor ADC DAC PDC PIO


Technical Parameters

Manufacturer ATMEL RoHs Status Lead free / RoHS Compliant
Packing Tape & Reel (TR)/Cut Tape (CT)/Tray/Tube Package/Case

SAM3S2A Related Products

Ratings and Reviews

  • 0 / 5
  • 5 Stars 0%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
Reviews
  • Ratings
  • Please rate the product!
Payment:
Payment
Shipping:
Shipping More
Estimated Delivery Time: Feb 02 - Feb 07 days (choose Expedited at checkout).

Shipping & Payment

Shipping

Shipping Type Ship Fee Lead Time
DHL

$20.00-$40.00 (0.50 KG)

2-5 days
Fedex

$20.00-$40.00 (0.50 KG)

3-7 days
UPS

$20.00-$45.00 (0.50 KG)

2-5 days
TNT

$25.00-$65.00 (0.50 KG)

2-5 days
EMS

$25.00-$45.00 (0.50 KG)

5-14 days
REGISTERED AIR MAIL

$2.00-$3.00 (0.10 KG)

7-30 days

Processing Time:Shipping fee depend on different zone and country.


Payment

Terms of payment Hand Fee Payment Site
Wire Transfer

charge US$30.00 banking fee.

Paypal

charge 4.0% service fee.

https://www.paypal.com/
Credit Card

charge 3.5% service fee.

Western Union

charge US$0.00 banking fee.

https://www.westernunion.com/
Money Gram

charge US$0.00 banking fee.

http://global.moneygram.com/

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.

Packing

  • Step1:Product

    Step1:Product

  • Step2:Vacuum packaging

    Step2:Vacuum packaging

  • Step3:Anti-static bag

    Step3:Anti-static bag

  • Step4:Individual packaging

    Step4:Individual packaging

  • Step5:Packaging boxes

    Step5:Packaging boxes

  • Step6:bar-code shipping tag

    Step6:bar-code shipping tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Guarantees

1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.

FAQ:

Q: How does Jotrin guarantee that SAM3S2A is the original manufacturer or agent of ATMEL?
We have a professional business development department to strictly test and verify the qualifications of ATMEL original manufacturers and agents. All ATMEL suppliers must pass the qualification review before they can publish their SAM3S2A devices; we pay more attention to the channels and quality of SAM3S2A products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
Q: How to find the detailed information of SAM3S2A chips? Including ATMEL original factory information, Microprocessors , ARM application, SAM3S2A pictures?
You can use Jotrin's intelligent search engine, or filter by Microprocessors , ARM category, or find it through ATMEL Corporation (Microchip Technology) Information page.
Q: Are the ATMEL's SAM3S2A price and stock displayed on the platform accurate?
The ATMEL's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for SAM3S2A, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
Q: What forms of payment can I use in Jotrin?
TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement of SAM3S2A?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the SAM3S2A we delivered, we will accept the replacement or return of the SAM3S2A only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of SAM3S2A.
(3)The SAM3S2A is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
Q: How to contact us and get support, such as SAM3S2A datasheet pdf, SAM3S2A pin diagram?
Need any After-Sales service, please feel free contact us: sales@jotrin.com

ATMEL Corporation (Microchip Technology)

Atmel
Atmel Corporation is a global leader in designing, manufacturing and marketing advanced semiconductors including microcontroller (MCU), programmable logic, and nonvolatile memory....
  • ATA5831
    ATA5831 RF Transceiver ICs deliver output power up to 14.5 dBm.
  • AS3696
    AS3696 Lighting Management austriamicrosystems AS3696 Backlighting IC 4 channel white LED controller for 3D-LCD backlight
  • FDA4100LV
    FDA4100LV 4x135W / 2x270W low voltage operation PWM digital input power amplifier with I2C diagnostics and step-up driver
  • ADF7023-J
    ADF7023-J High Performance, Low Power, ISM Band FSK/GFSK/MSK/GMSK Transceiver IC
  • A6211
    A6211 Constant-Current 3-Ampere PWM Dimmable Buck Regulator LED Driver
  • HMC967LP4E
    HMC967LP4E Up/Down Conv Mixer 3.5V 24GHz 24-Pin QFN EP Reel

Certificates & Honor

Certificates & Honor