Products > Integrated Circuits (ICs) > Embedded Processors & Controllers > RM48L952DZWTT
  • RM48L952DZWTT

Images are for reference only.


Hot Sale

MCU 16Bit/32Bit Hercules RM ARM Cortex R4F RISC 3072KB Flash 1.2V/3.3V 337Pin NFBGA

  • Manufacturer :
  • TI
  • Package/Case :
  • NFBGA-337
  • Product Categories :
  • Microcontrollers
  • RoHs Status:
  • Green
  • Marking Code:
  • RM48 L952DZWTT
  • In-stock:
  • 0


Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.

RM48L952DZWTT Product Details

The RM48L952device is ahigh-performance microcontroller family forsafety systems. The safety architecture includesdual CPUs in lockstep, CPUand memory BIST logic, ECC on both the flash and the data SRAM, parityonperipheral memories, and loopback capability on peripheral I/Os.

The RM48L952deviceintegrates the ARM Cortex-R4FFloating-PointCPU. The CPU offers an efficient 1.66 DMIPS/MHz, and hasconfigurations thatcan run up to 220MHz, providing up to 365 DMIPS.The device supports thelittle-endian [LE]format.

The RM48L952DZWTT device has 3MB ofintegrated flash and 256KB of data RAM.Both the flash andRAM have single-bit error correction and double-bit errordetection. The flash memory on thisdevice is a nonvolatile, electricallyerasable, and programmable memory implemented with a64-bit-wide data businterface. The flash operates on a 3.3-V supply input (same level as I/Osupply) for all read, program, and erase operations. When in pipeline mode, theflash operates witha system clock frequency of up to 220 MHz.The SRAMsupports single-cycle read and write accesses in byte, halfword, word, anddouble-wordmodes.

The RM48L952devicefeatures peripherals for real-time control-basedapplications, including twoNext Generation High-End Timer (N2HET) timingcoprocessors and two 12-bit Analog-to-DigitalConverters (ADCs) supporting upto 24 inputs.

The N2HET is an advanced intelligent timer that provides sophisticated timingfunctionsfor real-time applications. The timer is software-controlled, usinga reduced instruction set, witha specialized timer micromachine and anattached I/O port. The N2HET can be used forpulse-width-modulated outputs,capture or compare inputs, or GPIO. The N2HET is especially wellsuited forapplications requiring multiple sensor information and drive actuators withcomplex andaccurate time pulses. A High-End Timer Transfer Unit (HTU) canperform DMA-type transactions totransfer N2HET data to or from main memory.A Memory Protection Unit (MPU) is built into theHTU.

Thedevice has two 12-bit-resolution MibADCs with 24 channels and 64 wordsof parity-protected bufferRAM each. The MibADC channels can be convertedindividually or can be grouped by software forsequential conversionsequences. Sixteen channels are shared between the two MibADCs. There arethree separate groupings. Each sequence can be converted once when triggered orconfigured forcontinuous conversion mode. The MibADC has a 10-bit mode foruse when compatibility with olderdevices or faster conversion time isdesired.

Thedevice has multiple communication interfaces: three MibSPIs,twoSPIs, one LIN, one SCI, three DCANs,one I2C module, oneEthernet, and oneUSB module. The SPIsprovide a convenient method of serial high-speedcommunication between similar shift-register typedevices. The LIN supportsthe Local Interconnect standard 2.0 and can be used as a UART infull-duplexmode using the standard Non-Return-to-Zero (NRZ) format.

TheDCAN supports the CAN 2.0 (A and B) protocol standard and uses aserial, multimaster communicationprotocol that efficiently supportsdistributed real-time control with robust communication rates ofup to 1Mbps. The DCAN is ideal for systems operating in noisy and harsh environments(for example,automotive vehicle networking and industrial fieldbus) thatrequire reliable serial communicationor multiplexed wiring.

The Ethernet module supports MII, RMII, and MDIO interfaces.

The USB module includes a 2-port USB host controller. Itis revision2.0-compatible, based on the OHCI specification for USB, release 1.0. The USBmodulealso includes a USB device controller compatible with the USBspecification revision 2.0 and USBspecification revision 1.1.

TheI2C module is a multimaster communication module providing aninterface between the microcontrollerand an I2C-compatible devicethrough the I2Cserial bus. The I2C supports speeds of100 and 400 Kbps.

The Frequency-Modulated Phase-Locked Loop (FMPLL) clock module is used tomultiply theexternal frequency reference to a higher frequency for internaluse. There are two FMPLL modules onthis device. These modules, when enabled,provide two of the seven possible clock source inputs tothe Global ClockModule (GCM). The GCM manages the mapping between the available clock sourcesandthe device clock domains.

The device also has an External Clock Prescaler (ECP) module that whenenabled, outputsa continuous external clock on the ECLK pin (or ball). TheECLK frequency is a user-programmableratio of the peripheral interface clock(VCLK) frequency. This low-frequency output can bemonitored externally as anindicator of the device operating frequency.

The DMA controller has 16 channels, 32 peripheral requests, and parityprotection on its memory. An MPU is built into the DMA to limit the DMA toprescribed areas ofmemory and to protect the rest of the memory system fromany malfunction of the DMA.

The Error Signaling Module (ESM) monitors all device errors and determineswhether aninterrupt is generated or the external ERRORpin is toggled when a fault isdetected. The ERRORpin can be monitored externally as an indicator of afault condition in themicrocontroller.

TheExternal Memory Interface (EMIF) provides off-chip expansioncapability with the ability tointerface to synchronous DRAM (SDRAM) devices,asynchronous memories, peripherals, or FPGAdevices.

Severalinterfaces are implemented to enhance the debugging capabilitiesof application code. In additionto the built-in ARM Cortex-R4F CoreSightdebug features, an External Trace Macrocell (ETM) providesinstruction anddata trace of program execution. For instrumentation purposes, a RAM Trace Port (RTP) module is implemented to support high-speed tracing of RAM andperipheral accesses by the CPUor any other master. A Data ModificationModule (DMM) gives the ability to write external data intothe device memory.Both the RTP and DMM have no or only minimum impact on the program executiontime of the application code. A Parameter Overlay Module (POM) can reroute flashaccesses tointernal memory or to the EMIF. This rerouting allows the dynamiccalibration against productioncode of parameters and tables withoutrebuilding the code to explicitly access RAM or halting theprocessor toreprogram the data flash.

With integrated safety features and a wide choice of communication andcontrolperipherals, the RM48L952DZWTT device is anideal solution forhigh-performance real-time control applications with safety-critical



  • High-Performance Microcontroller for Safety-Critical Applications
    • Dual CPUs Running in Lockstep
    • ECC on Flash and RAM Interfaces
    • Built-In Self-Test (BIST) for CPU and On-chip RAMs
    • Error Signaling Module With Error Pin
    • Voltage and Clock Monitoring
  • ARM Cortex-R4F 32-Bit RISC CPU
    • Efficient 1.66 DMIPS/MHz With 8-Stage Pipeline
    • FPU With Single- and Double-Precision
    • 12-Region Memory Protection Unit (MPU)
    • Open Architecture With Third-Party Support
  • Operating Conditions
    • System Clock up to 220 MHz
    • Core Supply Voltage (VCC): 1.2 V Nominal
    • I/O Supply Voltage (VCCIO): 3.3 V Nominal
    • ADC Supply Voltage (VCCAD): 3.0 to 5.25 V
  • Integrated Memory
    • 3MB of Program Flash With ECC
    • 256KB of RAM With ECC
    • 64KB of Flash With ECC for Emulated EEPROM
  • 16-Bit External Memory Interface
  • Common Platform Architecture
    • Consistent Memory Map Across Family
    • Real-Time Interrupt (RTI) Timer OS Timer
    • 96-Channel Vectored Interrupt Module (VIM)
    • 2-Channel Cyclic Redundancy Checker (CRC)
  • Direct Memory Access (DMA) Controller
    • 16 Channels and 32 Peripheral Requests
    • Parity Protection for Control Packet RAM
    • DMA Accesses Protected by Dedicated MPU
  • Frequency-Modulated Phase-Locked Loop (FMPLL) With Built-In SlipDetector
  • Separate Nonmodulating PLL
  • Trace and Calibration Capabilities
    • Embedded Trace Macrocell (ETM-R4)
    • Data Modification Module (DMM)
    • RAM Trace Port (RTP)
    • Parameter Overlay Module (POM)
  • Multiple Communication Interfaces
    • 10/100 Mbps Ethernet MAC (EMAC)
      • IEEE 802.3 Compliant (3.3-V I/O Only)
      • Supports MII, RMII, and MDIO
    • USB
      • 2-Port USB Host Controller
      • One Full-Speed USB Device Port
    • Three CAN Controllers (DCANs)
      • 64 Mailboxes, Each With Parity Protection
      • Compliant to CAN Protocol Version 2.0B
    • Standard Serial Communication Interface (SCI)
    • Local Interconnect Network (LIN) Interface Controller
      • Compliant to LIN Protocol Version 2.1
      • Can be Configured as a Second SCI
    • Inter-Integrated Circuit (I2C)
    • Three Multibuffered Serial Peripheral Interfaces (MibSPIs)
      • 128 Words With Parity Protection Each
    • Two Standard Serial Peripheral Interfaces (SPIs)
  • Two Next Generation High-End Timer (N2HET) Modules
    • N2HET1: 32 Programmable Channels
    • N2HET2: 18 Programmable Channels
    • 160-Word Instruction RAM Each With Parity Protection
    • Each N2HET Includes Hardware Angle Generator
    • Dedicated High-End Transfer Unit (HTU) With MPU for Each N2HET
  • Two 12-Bit Multibuffered ADC Modules
    • ADC1: 24 Channels
    • ADC2: 16 Channels Shared With ADC1
    • 64 Result Buffers With Parity Protection Each
  • General-Purpose Input/Output (GPIO) Pins Capable of GeneratingInterrupts
    • 16 Pins on the ZWT Package
    • 10 Pins on the PGE Package
  • IEEE 1149.1 JTAG, Boundary Scan and ARM CoreSight Components
  • JTAG Security Module
  • Packages
    • 144-Pin Quad Flatpack (PGE) [Green]
    • 337-Ball Grid Array (ZWT) [Green]

Technical Parameters

  • Frequency
  • 220 MHz
  • Clock Speed
  • 220 MHz
  • RAM Memory Size
  • 262144 B
  • FLASH Memory Size
  • 3145728 B
  • Number of UARTs
  • 2
  • Product Lifecycle Status
  • Active
  • Packaging
  • Tray
  • Case/Package
  • NFBGA-337
  • RoHS
  • Compliant
  • Lead Free Status
  • Lead Free

RM48L952DZWTT Documents

RM48L952DZWTT Related Products

Ratings and Reviews (1)

  • 5 / 5
  • 5 Stars 100%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
  • **дарц***

    получил. всё новое и хорошего качества.

  • Ratings
  • Please rate the product!
Shipping More
Estimated Delivery Time: Dec 05 - Dec 10 days (choose Expedited at checkout).

Shipping & Payment


  • Shipping Type
  • Ship Fee
  • Lead Time
  • $20.00-$40.00 (0.50 KG)
  • 2-5 days
  • $20.00-$40.00 (0.50 KG)
  • 3-7 days
  • $20.00-$45.00 (0.50 KG)
  • 2-5 days
  • $25.00-$65.00 (0.50 KG)
  • 2-5 days
  • $25.00-$45.00 (0.50 KG)
  • 5-14 days
  • $2.00-$3.00 (0.10 KG)
  • 7-30 days

Processing Time:Shipping fee depend on different zone and country.


  • Terms of payment
  • Hand Fee
  • Payment Site
  • charge US$30.00 banking fee.
  • charge 4.0% service fee.
  • charge 3.5% service fee.
  • charge US$0.00 banking fee.
  • charge US$0.00 banking fee.

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.


  • Step1:Product

    Step1: Products

  • Step2:Vacuum packaging

    Step2: Vacuum Packaging

  • Step3:Anti-static bag

    Step3: Anti-Static Bag

  • Step4:Individual packaging

    Step4: Individual Packaging

  • Step5:Packaging boxes

    Step5: Packaging Boxes

  • Step6:bar-code shipping tag

    Step6: Bar-Code Shipping Tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Jotrin ESD packing


1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.


Q: How does Jotrin guarantee that RM48L952DZWTT is the original manufacturer or agent of TI?
We have a professional business development department to strictly test and verify the qualifications of TI original manufacturers and agents. All TI suppliers must pass the qualification review before they can publish their RM48L952DZWTT devices; we pay more attention to the channels and quality of RM48L952DZWTT products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
Q: How to find the detailed information of RM48L952DZWTT chips? Including TI original factory information, Microcontrollers application, RM48L952DZWTT pictures?
You can use Jotrin's intelligent search engine, or filter by Semiconductors ; Microcontrollers (MCU) ; Hercules MCUs for functional safety category, or find it through TI brand manufacturer page.
Q: Are the TI's RM48L952DZWTT price and stock displayed on the platform accurate?
The TI's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for RM48L952DZWTT, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
Q: What forms of payment can I use in Jotrin?
TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement of RM48L952DZWTT?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the RM48L952DZWTT we delivered, we will accept the replacement or return of the RM48L952DZWTT only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of RM48L952DZWTT.
(3)The RM48L952DZWTT is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
Q: How to contact us and get support, such as RM48L952DZWTT datasheet pdf, RM48L952 pin diagram?
Need any After-Sales service, please feel free contact us:

Popular Electronic Parts

  • MAX14870ETC+T
    MAX14870ETC+T Motor / Motion / Ignition Controllers & Drivers 4.5-36V DC Brushed Mot...
  • MAX16990ATCE/V+
    MAX16990ATCE/V+ PWM Controller, AEC-Q100, 4.5V to 36V Supply, 1MHz, 5V/0.75A out, TQFN...
  • MAX30100EFD+
    MAX30100EFD+ IC, Special Function, Pulse Oximeter & Heart Rate Sensor, 1.7 V-2 V su...
  • MAX44284FAUT+T
    MAX44284FAUT+T Current Sense Amplifier, High Precision, 1 Amplifier, 2000 pA, SOT-23,...
  • MAX98357AETE+
    MAX98357AETE+ Audio Power Amplifier, PCM, 3.2 W, D, 1 Channel, 2.5V to 5.5V, TQFN, 1...
  • MAX98357AETE+T
    MAX98357AETE+T Audio Power Amplifier, 3.2 W, D, 1 Channel, 2.5V to 5.5V, TQFN, 16 Pin...

Certificates & Honor

Certificates & Honor