MCU 16Bit/32Bit Hercules RM ARM Cortex R4F RISC 2048KB Flash 1.2V/3.3V 337Pin NFBGA
Request for Quotation
RM48L740DZWTT Product Details
TheRM48Lx40 device is ahigh-performance microcontroller family forsafety systems. The safety architecture includesdual CPUs in lockstep, CPUand memory BIST logic, ECC on both the flash and the data SRAM, parityonperipheral memories, and loopback capability on peripheral I/Os.
The RM48Lx40deviceintegrates the ARM Cortex-R4FFloating-PointCPU. The CPU offers an efficient 1.66 DMIPS/MHz, and hasconfigurations thatcan run up to 200MHz, providing up to 332 DMIPS.The device supports thelittle-endian [LE]format.
The RM48L940 device has 3MB of integrated flash and 256KB of data RAM. TheRM48L740DZWTT device has 2MB of integrated flash and 256KB of data RAM. The RM48L540device has 2MB ofintegrated flash and 192KB of data RAM.Both the flash and RAM have single-bit error correction and double-bit error detection. Theflash memory on thisdevice is a nonvolatile, electrically erasable, andprogrammable memory implemented with a64-bit-wide data bus interface. Theflash operates on a 3.3-V supply input (same level as I/Osupply) for allread, program, and erase operations. When in pipeline mode, the flash operateswitha system clock frequency of up to 200 MHz.The SRAM supportssingle-cycle read and write accesses in byte, halfword, word, and double-wordmodes.
The RM48Lx40devicefeatures peripherals for real-time control-basedapplications, including twoNext Generation High-End Timer (N2HET) timingcoprocessors and two 12-bit Analog-to-DigitalConverters (ADCs) supporting upto 24 inputs.
The N2HET is an advanced intelligent timer that provides sophisticated timingfunctionsfor real-time applications. The timer is software-controlled, usinga reduced instruction set, witha specialized timer micromachine and anattached I/O port. The N2HET can be used forpulse-width-modulated outputs,capture or compare inputs, or GPIO. The N2HET is especially wellsuited forapplications requiring multiple sensor information and drive actuators withcomplex andaccurate time pulses. A High-End Timer Transfer Unit (HTU) canperform DMA-type transactions totransfer N2HET data to or from main memory.A Memory Protection Unit (MPU) is built into theHTU.
Thedevice has two 12-bit-resolution MibADCs with 24 channels and 64 wordsof parity-protected bufferRAM each. The MibADC channels can be convertedindividually or can be grouped by software forsequential conversionsequences. Sixteen channels are shared between the two MibADCs. There arethree separate groupings. Each sequence can be converted once when triggered orconfigured forcontinuous conversion mode. The MibADC has a 10-bit mode foruse when compatibility with olderdevices or faster conversion time isdesired.
Thedevice has multiple communication interfaces: three MibSPIs,twoSPIs, one LIN, one SCI, three DCANs,one I2C module, and oneEthernet. TheSPIsprovide a convenient method of serial high-speed communication betweensimilar shift-register typedevices. The LIN supports the Local Interconnectstandard 2.0 and can be used as a UART infull-duplex mode using the standardNon-Return-to-Zero (NRZ) format.
TheDCAN supports the CAN 2.0 (A and B) protocol standard and uses aserial, multimaster communicationprotocol that efficiently supportsdistributed real-time control with robust communication rates ofup to 1Mbps. The DCAN is ideal for systems operating in noisy and harsh environments(for example,automotive vehicle networking and industrial fieldbus) thatrequire reliable serial communicationor multiplexed wiring.
The Ethernet module supports MII, RMII, and MDIO interfaces.
TheI2C module is a multimaster communication module providing aninterface between the microcontrollerand an I2C-compatible devicethrough the I2Cserial bus. The I2C supports speeds of100 and 400 Kbps.
The Frequency-Modulated Phase-Locked Loop (FMPLL) clock module is used tomultiply theexternal frequency reference to a higher frequency for internaluse. There are two FMPLL modules onthis device. These modules, when enabled,provide two of the seven possible clock source inputs tothe Global ClockModule (GCM). The GCM manages the mapping between the available clock sourcesandthe device clock domains.
The device also has an External Clock Prescaler (ECP) module that whenenabled, outputsa continuous external clock on the ECLK pin (or ball). TheECLK frequency is a user-programmableratio of the peripheral interface clock(VCLK) frequency. This low-frequency output can bemonitored externally as anindicator of the device operating frequency.
The DMA controller has 16 channels, 32 peripheral requests, and parityprotection on its memory. An MPU is built into the DMA to limit the DMA toprescribed areas ofmemory and to protect the rest of the memory system fromany malfunction of the DMA.
The Error Signaling Module (ESM) monitors all device errors and determineswhether aninterrupt is generated or the external ERRORpin is toggled when a fault isdetected. The ERRORpin can be monitored externally as an indicator of afault condition in themicrocontroller.
TheExternal Memory Interface (EMIF) provides off-chip expansioncapability with the ability tointerface to synchronous DRAM (SDRAM) devices,asynchronous memories, peripherals, or FPGAdevices.
Severalinterfaces are implemented to enhance the debugging capabilitiesof application code. In additionto the built-in ARM Cortex-R4F CoreSightdebug features, an External Trace Macrocell (ETM) providesinstruction anddata trace of program execution. For instrumentation purposes, a RAM Trace Port (RTP) module is implemented to support high-speed tracing of RAM andperipheral accesses by the CPUor any other master. A Data ModificationModule (DMM) gives the ability to write external data intothe device memory.Both the RTP and DMM have no or only minimum impact on the program executiontime of the application code. A Parameter Overlay Module (POM) can reroute flashaccesses tointernal memory or to the EMIF. This rerouting allows the dynamiccalibration against productioncode of parameters and tables withoutrebuilding the code to explicitly access RAM or halting theprocessor toreprogram the data flash.
With integrated safety features and a wide choice of communication andcontrolperipherals, the RM48Lx40 device is anideal solution forhigh-performance real-time control applications with safety-critical
- High-Performance Microcontroller for Safety-Critical Applications
- Dual CPUs Running in Lockstep
- ECC on Flash and RAM Interfaces
- Built-In Self-Test (BIST) for CPU and On-chip RAMs
- Error Signaling Module With Error Pin
- Voltage and Clock Monitoring
- ARM Cortex-R4F 32-Bit RISC CPU
- Efficient 1.66 DMIPS/MHz With 8-Stage Pipeline
- FPU With Single- and Double-Precision
- 12-Region Memory Protection Unit (MPU)
- Open Architecture With Third-Party Support
- Operating Conditions
- System Clock up to 200 MHz
- Core Supply Voltage (VCC): 1.2 V Nominal
- I/O Supply Voltage (VCCIO): 3.3 V Nominal
- ADC Supply Voltage (VCCAD): 3.0 to 5.25 V
- Integrated Memory
- 3MB of Program Flash With ECC (RM48L940)
- 2MB of Program Flash With ECC (RM48L740/540)
- 256KB of RAM With ECC (RM48L940/740)
- 192KB of RAM With ECC (RM48L540)
- 64KB of Flash With ECC for Emulated EEPROM
- 16-Bit External Memory Interface
- Common Platform Architecture
- Consistent Memory Map Across Family
- Real-Time Interrupt (RTI) Timer OS Timer
- 96-Channel Vectored Interrupt Module (VIM)
- 2-Channel Cyclic Redundancy Checker (CRC)
- Direct Memory Access (DMA) Controller
- 16 Channels and 32 Peripheral Requests
- Parity Protection for Control Packet RAM
- DMA Accesses Protected by Dedicated MPU
- Frequency-Modulated Phase-Locked Loop (FMPLL) With Built-In SlipDetector
- Separate Nonmodulating PLL
- Trace and Calibration Capabilities
- Embedded Trace Macrocell (ETM-R4)
- Data Modification Module (DMM)
- RAM Trace Port (RTP)
- Parameter Overlay Module (POM)
- Multiple Communication Interfaces
- 10/100 Mbps Ethernet MAC (EMAC)
- IEEE 802.3 Compliant (3.3-V I/O Only)
- Supports MII, RMII, and MDIO
- Three CAN Controllers (DCANs)
- 64 Mailboxes, Each With Parity Protection
- Compliant to CAN Protocol Version 2.0B
- Standard Serial Communication Interface (SCI)
- Local Interconnect Network (LIN) Interface Controller
- Compliant to LIN Protocol Version 2.1
- Can be Configured as a Second SCI
- Inter-Integrated Circuit (I2C)
- Three Multibuffered Serial Peripheral Interfaces (MibSPIs)
- 128 Words With Parity Protection Each
- Two Standard Serial Peripheral Interfaces (SPIs)
- 10/100 Mbps Ethernet MAC (EMAC)
- Two Next Generation High-End Timer (N2HET) Modules
- N2HET1: 32 Programmable Channels
- N2HET2: 18 Programmable Channels
- 160-Word Instruction RAM Each With Parity Protection
- Each N2HET Includes Hardware Angle Generator
- Dedicated High-End Transfer Unit (HTU) With MPU for Each N2HET
- Two 12-Bit Multibuffered ADC Modules
- ADC1: 24 Channels
- ADC2: 16 Channels Shared With ADC1
- 64 Result Buffers With Parity Protection Each
- General-Purpose Input/Output (GPIO) Pins Capable of GeneratingInterrupts
- 16 Pins on the ZWT Package
- 10 Pins on the PGE Package
- IEEE 1149.1 JTAG, Boundary Scan and ARM CoreSight Components
- JTAG Security Module
- 144-Pin Quad Flatpack (PGE) [Green]
- 337-Ball Grid Array (ZWT) [Green]
|Frequency||200 MHz||Product Lifecycle Status||Active|
|Clock Speed||200 MHz||Packaging||Tray|
|RAM Memory Size||262144 B||Case/Package||LFBGA|
|FLASH Memory Size||2097152 B||RoHS||Compliant|
|Number of UARTs||2||Lead Free Status||Lead Free|
RM48L740 Family Datasheet
RM48L740DZWTT Related Products
Ratings and Reviews (0)
- 0 / 5
- 5 Stars 0%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
Estimated Delivery Time: Oct 26 - Oct 31 days (choose Expedited at checkout).
Shipping & Payment
|Shipping Type||Ship Fee||Lead Time|
$20.00-$40.00 (0.50 KG)
$20.00-$40.00 (0.50 KG)
$20.00-$45.00 (0.50 KG)
$25.00-$65.00 (0.50 KG)
$25.00-$45.00 (0.50 KG)
|REGISTERED AIR MAIL||
$2.00-$3.00 (0.10 KG)
Processing Time：Shipping fee depend on different zone and country.
|Terms of payment||Hand Fee||Payment Site|
charge US$30.00 banking fee.
charge 4.0% service fee.
charge 3.5% service fee.
charge US$0.00 banking fee.
charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step6:bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: What are the advantages of buying from Jotrin?
Jotrin is your second procurement department of the electronic components. The platform has supported by over 1000 original factories and authorized agents,
over 10 years of experience in the electronic components area.
Jotrin is aiming to help these manufacturers, EMS, PCBA clients offer a whole BOM solution with the assistant of their professional BOM team and Intelligent BOM software.
We can help you:
1. Do the cost down for your current regular orders.
2. Decrease your suppliers' management costs and suppliers' qty.
3. Improve your efficiency, we can offer the whole BOM one-stop supply chain service.
- Q: How can Jotrin guarantee to be the original manufacturers or the agents?
- We have a professional business development department to strictly examine and verify the qualifications of the original manufacturers and the agents. All the suppliers must pass the qualification examination before putting their materials on the shelves; We pay more attention to the channel and quality of products than any other customers, we are strict with supplier audit, you can rest assured that choice.
- Q: What are the business hours of Jotrin?
Although we accept quotation requests and orders anytime 24 hours a day regardless of business days and hours, we provide quotations and process orders during business time.
Business Hours: Monday - Friday 9:00am - 9:00pm (GMT+8)
- Q: Is the inventory and price seen on the platform accurate?
- Inventory fluidity big, unable to update in time, it will be updated periodically within 24 hours. After placing the order, it is suggested to confirm the order with the supplier or the online customer service of Jotrin before paying.
- Q: Can I place an order offline?
Yes. We accept offline orders.
You can contact our customer service representatives to help you customize your requirements.
If you'd like to submit your purchase orders via email, please send us a note to email@example.com. One of our customer service representatives will help you.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Western Union, Paypal, and Escrow is all acceptable.
- Q: How is the shipping arranged?
- Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail. No shipment handling charges be included.
- Q: How can I track my package?
- Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status of your order and its tracking number, if applicable. When the tracking numbers are present, you can click on the link and it will take you directly to the carriers' website so that you can track your order. Note: It may take up to 24 hours before carriers will display tracking information.
- Q: When can I receive my package？
- In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the product we delivered, we will accept the replacement or return of the product only when all of the below conditions are fulfilled:
(1)There are any problems with the product we delivered, such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of the product.
(3)The product is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy
- Q: How to contact us and get support?
- Need any After-Sales service, please feel free contact us: firstname.lastname@example.org
- 1.Design of Software Phase-locking Based on DSP2812
- 2.The design of intelligent instrument based on DSP device TMS320C32 and CPLD chip
- 3.Design of audio signal acquisition system based on TMS320C6713
- 4.Gate Drivers and NexFET Power Blocks deliver 700 W of power
- 5.MSP430 FRAM microcontroller writes without pre-erase or buffering.
- 6.RRIO Op Amp drives ADCs in high-voltage, precision DAQ systems.
SM74101SD/NOPB Tiny 7A MOSFET Gate Driver 6-WSON -40℃ to 125℃
SM74101SDX/NOPB Tiny 7A MOSFET Gate Driver 6-WSON -40℃ to 125℃
STM32F205RGT6V ARM MCU, STM32 Family STM32F2 Series Microcontrollers, ARM Cortex-M3, 32bit, 120 MHz, 1 MB, 128 KB
A42MX16-FPQG208 FPGA 42MX Family 24K Gates 608 Cells 62MHz/103MHz 0.45um Technology 3.3V/5V 208Pin PQFP
A42MX16-FTQG176 FPGA 42MX Family 24K Gates 608 Cells 62MHz/103MHz 0.45um Technology 3.3V/5V 176Pin TQFP
ATSAM4SD32BA-AN MCU 32Bit SAM4S ARM Cortex M4 RISC 2048KB Flash 1.2V/3.3V 64Pin LQFP Tray