Products > Integrated Circuits (ICs) > Embedded Processors & Controllers > RM46L852CZWTT
TI

Images are for reference only.

RM46L852CZWTT

Hot Sale

MCU 16Bit/32Bit Hercules RM ARM Cortex R4F RISC 1280KB Flash 1.2V/3.3V 337Pin NFBGA

  • Manufacturer :
  • TI
  • Package/Case :
  • NFBGA-337
  • Product Categories :
  • Logic ICs
  • RoHs Status:
  • Green
  • Marking Code:
  • RM46 L852CZWTT
  • In-stock:
  • 0

Quantity  

Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.


RM46L852CZWTT Product Details

The RM46L852CZWTT deviceis a high-performance microcontroller family forsafety systems. The safety architecture includesdual CPUs in lockstep, CPUand memory BIST logic, ECC on both the flash and the data SRAM, parityonperipheral memories, and loopback capability on peripheral I/Os.

The RM46L852CZWTT deviceintegrates the ARM Cortex-R4Ffloating-pointCPU which offers an efficient 1.66 DMIPS/MHz, andcan run up to 220 MHzprovidingup to 365 DMIPS.The device supports the little-endian [LE]format.

The RM46L852CZWTT devicehas 1.25MB of integratedflash and 192KB ofdata RAM with single-bit error correction and double-bit error detection. Theflash memory on this device is a nonvolatile, electrically erasable andprogrammable memory, implemented with a 64-bit-wide data bus interface. Theflash operates on a3.3-V supply input (same level as I/O supply) for allread, program, and erase operations. When inpipeline mode, the flashoperates with a system clock frequency of up to 220 MHz. The SRAMsupportssingle-cycle read and write accesses in byte, halfword, word, and double-wordmodesthroughout the supported frequency range.

The RM46L852CZWTT devicefeatures peripherals for real-time control-basedapplications, includingtwo Next Generation High-End Timer (N2HET) timingcoprocessorswith up to 44 I/O terminals, seven Enhanced Pulse WidthModulator (ePWM) modules with up to 14outputs, six Enhanced Capture (eCAP)modules, two Enhanced Quadrature Encoder Pulse (eQEP) modules,and two 12-bitAnalog-to-Digital Converters (ADCs) supporting up to 24 inputs.

The N2HET is an advanced intelligent timer that provides sophisticated timingfunctionsfor real-time applications. The timer is software-controlled, usinga reduced instruction set, witha specialized timer micromachine and anattached I/O port. The N2HET can be used forpulse-width-modulated outputs,capture or compare inputs, or general-purpose I/O (GIO). The N2HETisespecially well suited for applications requiring multiple sensor informationand driveactuators with complex and accurate time pulses. A High-End TimerTransfer Unit (HTU) can performDMA-type transactions to transfer N2HET datato or from main memory. A Memory Protection Unit (MPU)is built into theHTU.

TheePWM module can generate complex pulse width waveforms with minimalCPU overhead or intervention.The ePWM is easy to use and it supports bothhigh-side and low-side PWM and deadband generation.With integrated trip zoneprotection and synchronization with the on-chip MibADC, the ePWM moduleisideal for digital motor control applications.

TheeCAP module is essential in systems where the accurately timed captureof external events isimportant. The eCAP can also be used to monitor theePWM outputs or for simple PWM generation whenthe eCAP is not needed forcapture applications.

TheeQEP module is used for direct interface with a linear or rotaryincremental encoder to getposition, direction, and speed information from arotating machine as used in high-performancemotion and position-controlsystems.

The device hastwo12-bit-resolutionMibADCs with24 total inputsand 64 wordsof parity-protected buffer RAM each. The MibADC channels can beconverted individually or can begrouped by software for sequentialconversion sequences.Sixteeninputs are shared between the two MibADCs.Each MibADC supports three separate groupings ofchannels. Each group can beconverted once when triggered or configured for continuous conversionmode.The MibADC has a 10-bit mode for use when compatibility with older devices orfaster conversiontime is desired.MibADC1 also supports the use ofexternal analog multiplexers.

The device has multiple communication interfaces:three MibSPIs,twoSPIs, one LIN,oneSCI, three DCANs,one I2C,oneEthernet, and one USB module. The SPIprovides a convenient method of serialhigh-speed communications between similar shift-registertype devices. TheLIN supports the Local Interconnect standard 2.0 and can be used as a UART infull-duplex mode using the standard Non-Return-to-Zero (NRZ) format. The DCANsupports the CAN 2.0(A and B) protocol standard and uses a serial,multimaster communication protocol that efficientlysupports distributedreal-time control with robust communication rates of up to 1 Mbps. The DCAN isideal for systems operating in noisy and harsh environments (for example,automotive and industrialfields) that require reliable serial communicationor multiplexed wiring. The Ethernet module supports MII, RMII, andMDIOinterfaces.

The USB module includes a 2-port USB hostcontroller that is revision2.0-compatible, based on the OHCI specification for USB, release 1.0.The USBmodule also includes a USB device controller compatible with the USBspecification revision2.0 and USB specification revision 1.1.

TheI2C module is a multimaster communication module providing aninterface between the microcontrollerand an I2C-compatible devicethrough the I2Cserial bus. The I2C supports speeds of100 and 400 Kbps.

A Frequency-Modulated Phase-Locked Loop (FMPLL) clock module is used tomultiply theexternal frequency reference to a higher frequency for internaluse.The Global Clock Module (GCM) manages the mapping between the availableclock sources and thedevice clock domains.

The device also has an External Clock Prescaler (ECP) module that whenenabled, outputsa continuous external clock on the ECLK terminal. The ECLKfrequency is a user-programmable ratioof the peripheral interface clock(VCLK) frequency. This low-frequency output can be monitoredexternally as anindicator of the device operating frequency.

The Direct Memory Access (DMA) controller has 16 channels, 32 peripheralrequests,and parity protection on its memory. An MPU is built into the DMAto protect memory againsterroneous transfers.

The Error Signaling Module (ESM) monitors all device errors and determineswhether aninterrupt or external error pin (ball) is triggered when a faultis detected. The nERROR terminalcan be monitored externally as an indicatorof a fault condition in the microcontroller.

TheExternal Memory Interface (EMIF) provides a memory extension toasynchronous and synchronousmemories or other slave devices.

AParameter Overlay Module (POM) enhances the calibration capabilities ofapplication code. The POMcan reroute flash accesses to internal memory or tothe EMIF, thus avoiding the reprogramming stepsnecessary for parameterupdates in flash.

With integrated safety features and a wide choice of communication andcontrolperipherals, the RM46L852deviceis an ideal solution forhigh-performance real-time control applications with safety-critical

RM46L852CZWTT

Feature

  • High-Performance Microcontroller for Safety-Critical Applications
    • Dual CPUs Running in Lockstep
    • ECC on Flash and RAM Interfaces
    • Built-In Self-Test (BIST) for CPU and On-chip RAMs
    • Error Signaling Module With Error Pin
    • Voltage and Clock Monitoring
  • ARM Cortex-R4F 32-Bit RISC CPU
    • 1.66 DMIPS/MHz With 8-Stage Pipeline
    • FPU With Single- and Double-Precision
    • 12-Region Memory Protection Unit (MPU)
    • Open Architecture With Third-Party Support
  • Operating Conditions
    • Up to 220-MHz System Clock
    • Core Supply Voltage (VCC): 1.14 to 1.32 V
    • I/O Supply Voltage (VCCIO): 3.0 to 3.6 V
  • Integrated Memory
    • 1.25MB of Program Flash With ECC
    • 192KB of RAM With ECC
    • 64KB of Flash for Emulated EEPROM With ECC
  • 16-Bit External Memory Interface (EMIF)
  • Common Platform Architecture
    • Consistent Memory Map Across Family
    • Real-Time Interrupt (RTI) Timer (OS Timer)
    • 128-Channel Vectored Interrupt Module (VIM)
    • 2-Channel Cyclic Redundancy Checker (CRC)
  • Direct Memory Access (DMA) Controller
    • 16 Channels and 32 Peripheral Requests
    • Parity Protection for Control Packet RAM
    • DMA Accesses Protected by Dedicated MPU
  • Frequency-Modulated Phase-Locked Loop (FMPLL) With Built-In SlipDetector
  • Separate Nonmodulating PLL
  • IEEE 1149.1 JTAG, Boundary Scan and ARM CoreSight Components
  • Advanced JTAG Security Module (AJSM)
  • Calibration Capabilities
    • Parameter Overlay Module (POM)
  • 16 General-Purpose Input/Output (GPIO) Pins Capable of GeneratingInterrupts
  • Enhanced Timing Peripherals for Motor Control
    • 7 Enhanced Pulse Width Modulator (ePWM) Modules
    • 6 Enhanced Capture (eCAP) Modules
    • 2 Enhanced Quadrature Encoder Pulse (eQEP) Modules
  • Two Next Generation High-End Timer (N2HET) Modules
    • N2HET1: 32 Programmable Channels
    • N2HET2: 18 Programmable Channels
    • 160-Word Instruction RAM Each With Parity Protection
    • Each N2HET Includes Hardware Angle Generator
    • Dedicated High-End Timer Transfer Unit (HTU) for Each N2HET
  • Two 12-Bit Multibuffered Analog-to-Digital Converter (MibADC)Modules
    • ADC1: 24 Channels
    • ADC2: 16 Channels Shared With ADC1
    • 64 Result Buffers Each With Parity Protection
  • Multiple Communication Interfaces
    • 10/100 Mbps Ethernet MAC (EMAC)
      • IEEE 802.3 Compliant (3.3-V I/O Only)
      • Supports MII, RMII, and MDIO
    • USB
      • 2-Port USB Host Controller
      • One Full-Speed USB Device Port
    • Three CAN Controllers (DCANs)
      • 64 Mailboxes Each With Parity Protection
      • Compliant to CAN Protocol Version 2.0A and 2.0B
    • Inter-Integrated Circuit (I2C)
    • Three Multibuffered Serial Peripheral Interface (MibSPI) Modules
      • 128 Words Each With Parity Protection
      • 8 Transfer Groups
    • Up to Two Standard Serial Peripheral Interface (SPI) Modules
    • Two UART (SCI) Interfaces, One With Local Interconnect Network (LIN2.1) Interface Support
  • Packages
    • 144-Pin Quad Flatpack (PGE) [Green]
    • 337-Ball Grid Array (ZWT) [Green]

RM46L852CZWTT Block Diagram
(Picture: Diagram)

Technical Parameters

  • Frequency
  • 220 MHz
  • Clock Speed
  • 220 MHz
  • RAM Memory Size
  • 196608 B
  • FLASH Memory Size
  • 1310720 B
  • Number of UARTs
  • 2
  • Product Lifecycle Status
  • Active
  • Packaging
  • Tray
  • Case/Package
  • 337-LFBGA
  • RoHS
  • Compliant
  • Lead Free Status
  • Lead Free

RM46L852CZWTT Documents

RM46L852CZWTT Related Products

Ratings and Reviews

  • 0 / 5
  • 5 Stars 0%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
Reviews
  • Ratings
  • Please rate the product!
Payment:
Payment
Shipping:
Shipping More
Estimated Delivery Time: Aug 11 - Aug 16 days (choose Expedited at checkout).

Shipping & Payment

Shipping

  • Shipping Type
  • Ship Fee
  • Lead Time
  • $20.00-$40.00 (0.50 KG)
  • 2-5 days
  • $20.00-$40.00 (0.50 KG)
  • 3-7 days
  • $20.00-$45.00 (0.50 KG)
  • 2-5 days
  • $25.00-$65.00 (0.50 KG)
  • 2-5 days
  • $25.00-$45.00 (0.50 KG)
  • 5-14 days
  • $2.00-$3.00 (0.10 KG)
  • 7-30 days

Processing Time:Shipping fee depend on different zone and country.


Payment

  • Terms of payment
  • Hand Fee
  • Payment Site
  • charge US$30.00 banking fee.
  • charge 4.0% service fee.
  • https://www.paypal.com/
  • charge 3.5% service fee.
  • charge US$0.00 banking fee.
  • https://www.westernunion.com/
  • charge US$0.00 banking fee.
  • http://global.moneygram.com/

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.

Packing

  • Step1:Product

    Step1: Products

  • Step2:Vacuum packaging

    Step2: Vacuum Packaging

  • Step3:Anti-static bag

    Step3: Anti-Static Bag

  • Step4:Individual packaging

    Step4: Individual Packaging

  • Step5:Packaging boxes

    Step5: Packaging Boxes

  • Step6:bar-code shipping tag

    Step6: Bar-Code Shipping Tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Jotrin ESD packing

Guarantees

1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.

FAQ:

Q: How does Jotrin guarantee that RM46L852CZWTT is the original manufacturer or agent of TI?
We have a professional business development department to strictly test and verify the qualifications of TI original manufacturers and agents. All TI suppliers must pass the qualification review before they can publish their RM46L852CZWTT devices; we pay more attention to the channels and quality of RM46L852CZWTT products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
Q: How to find the detailed information of RM46L852CZWTT chips? Including TI original factory information, Logic ICs application, RM46L852CZWTT pictures?
You can use Jotrin's intelligent search engine, or filter by Semiconductors ; Microcontrollers (MCU) ; Hercules MCUs for functional safety category, or find it through TI brand manufacturer page.
Q: Are the TI's RM46L852CZWTT price and stock displayed on the platform accurate?
The TI's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for RM46L852CZWTT, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
Q: What forms of payment can I use in Jotrin?
TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement of RM46L852CZWTT?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the RM46L852CZWTT we delivered, we will accept the replacement or return of the RM46L852CZWTT only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of RM46L852CZWTT.
(3)The RM46L852CZWTT is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
Q: How to contact us and get support, such as RM46L852CZWTT datasheet pdf, RM46L852 pin diagram?
Need any After-Sales service, please feel free contact us: sales@jotrin.com

Popular Electronic Parts

  • MAX14870ETC+T
    MAX14870ETC+T Motor / Motion / Ignition Controllers & Drivers 4.5-36V DC Brushed Mot...
  • MAX16990ATCE/V+
    MAX16990ATCE/V+ PWM Controller, AEC-Q100, 4.5V to 36V Supply, 1MHz, 5V/0.75A out, TQFN...
  • MAX30100EFD+
    MAX30100EFD+ IC, Special Function, Pulse Oximeter & Heart Rate Sensor, 1.7 V-2 V su...
  • MAX44284FAUT+T
    MAX44284FAUT+T Current Sense Amplifier, High Precision, 1 Amplifier, 2000 pA, SOT-23,...
  • MAX98357AETE+
    MAX98357AETE+ Audio Power Amplifier, PCM, 3.2 W, D, 1 Channel, 2.5V to 5.5V, TQFN, 1...
  • MAX98357AETE+T
    MAX98357AETE+T Audio Power Amplifier, 3.2 W, D, 1 Channel, 2.5V to 5.5V, TQFN, 16 Pin...

Certificates & Honor

Certificates & Honor