MCU 16Bit/32Bit Hercules RM ARM Cortex R4F RISC 1280KB Flash 1.2V/3.3V 337Pin NFBGA
Request for Quotation
RM46L830CZWTT Product Details
The RM46Lx30 deviceis a high-performance microcontroller family forsafety systems. The safety architecture includesdual CPUs in lockstep, CPUand memory BIST logic, ECC on both the flash and the data SRAM, parityonperipheral memories, and loopback capability on peripheral I/Os.
The RM46Lx30 deviceintegrates the ARM Cortex-R4Ffloating-pointCPU which offers an efficient 1.66 DMIPS/MHz, andcan run up to 200 MHzprovidingup to 332 DMIPS.The device supports the little-endian [LE]format.
The RM46L830CZWTT devicehas 1.25MB of integratedflash and 192KB ofdata RAM with single-bit error correction and double-bit error detection. TheRM46L430device has 1MBof integrated flash and 128KB of data RAM withsingle-bit error correction and double-bit errordetection. The flash memoryon this device is a nonvolatile, electrically erasable andprogrammablememory, implemented with a 64-bit-wide data bus interface. The flash operates ona3.3-V supply input (same level as I/O supply) for all read, program, anderase operations. When inpipeline mode, the flash operates with a systemclock frequency of up to 200 MHz. The SRAMsupports single-cycle read andwrite accesses in byte, halfword, word, and double-word modesthroughout thesupported frequency range.
The RM46Lx30 devicefeatures peripherals for real-time control-basedapplications, includingtwo Next Generation High-End Timer (N2HET) timingcoprocessorswith up to 44 I/O terminals, seven Enhanced Pulse WidthModulator (ePWM) modules with up to 14outputs, six Enhanced Capture (eCAP)modules, two Enhanced Quadrature Encoder Pulse (eQEP) modules,and two 12-bitAnalog-to-Digital Converters (ADCs) supporting up to 24 inputs.
The N2HET is an advanced intelligent timer that provides sophisticated timingfunctionsfor real-time applications. The timer is software-controlled, usinga reduced instruction set, witha specialized timer micromachine and anattached I/O port. The N2HET can be used forpulse-width-modulated outputs,capture or compare inputs, or general-purpose I/O (GIO). The N2HETisespecially well suited for applications requiring multiple sensor informationand driveactuators with complex and accurate time pulses. A High-End TimerTransfer Unit (HTU) can performDMA-type transactions to transfer N2HET datato or from main memory. A Memory Protection Unit (MPU)is built into theHTU.
TheePWM module can generate complex pulse width waveforms with minimalCPU overhead or intervention.The ePWM is easy to use and it supports bothhigh-side and low-side PWM and deadband generation.With integrated trip zoneprotection and synchronization with the on-chip MibADC, the ePWM moduleisideal for digital motor control applications.
TheeCAP module is essential in systems where the accurately timed captureof external events isimportant. The eCAP can also be used to monitor theePWM outputs or for simple PWM generation whenthe eCAP is not needed forcapture applications.
TheeQEP module is used for direct interface with a linear or rotaryincremental encoder to getposition, direction, and speed information from arotating machine as used in high-performancemotion and position-controlsystems.
The device hastwo12-bit-resolutionMibADCs with24 total inputsand 64 wordsof parity-protected buffer RAM each. The MibADC channels can beconverted individually or can begrouped by software for sequentialconversion sequences.Sixteeninputs are shared between the two MibADCs.Each MibADC supports three separate groupings ofchannels. Each group can beconverted once when triggered or configured for continuous conversionmode.The MibADC has a 10-bit mode for use when compatibility with older devices orfaster conversiontime is desired.MibADC1 also supports the use ofexternal analog multiplexers.
The device has multiple communication interfaces:three MibSPIs,twoSPIs, one LIN,oneSCI, three DCANs,one I2C, and one USBmodule. The SPIprovides a convenient method of serial high-speedcommunications between similar shift-registertype devices. The LIN supportsthe Local Interconnect standard 2.0 and can be used as a UART infull-duplexmode using the standard Non-Return-to-Zero (NRZ) format. The DCAN supports theCAN 2.0(A and B) protocol standard and uses a serial, multimastercommunication protocol that efficientlysupports distributed real-timecontrol with robust communication rates of up to 1 Mbps. The DCAN isidealfor systems operating in noisy and harsh environments (for example, automotiveand industrialfields) that require reliable serial communication ormultiplexed wiring.
The USB module includes a 2-port USB hostcontroller that is revision2.0-compatible, based on the OHCI specification for USB, release 1.0.The USBmodule also includes a USB device controller compatible with the USBspecification revision2.0 and USB specification revision 1.1.
TheI2C module is a multimaster communication module providing aninterface between the microcontrollerand an I2C-compatible devicethrough the I2Cserial bus. The I2C supports speeds of100 and 400 Kbps.
A Frequency-Modulated Phase-Locked Loop (FMPLL) clock module is used tomultiply theexternal frequency reference to a higher frequency for internaluse.The Global Clock Module (GCM) manages the mapping between the availableclock sources and thedevice clock domains.
The device also has an External Clock Prescaler (ECP) module that whenenabled, outputsa continuous external clock on the ECLK terminal. The ECLKfrequency is a user-programmable ratioof the peripheral interface clock(VCLK) frequency. This low-frequency output can be monitoredexternally as anindicator of the device operating frequency.
The Direct Memory Access (DMA) controller has 16 channels, 32 peripheralrequests,and parity protection on its memory. An MPU is built into the DMAto protect memory againsterroneous transfers.
The Error Signaling Module (ESM) monitors all device errors and determineswhether aninterrupt or external error pin (ball) is triggered when a faultis detected. The nERROR terminalcan be monitored externally as an indicatorof a fault condition in the microcontroller.
TheExternal Memory Interface (EMIF) provides a memory extension toasynchronous and synchronousmemories or other slave devices.
AParameter Overlay Module (POM) enhances the calibration capabilities ofapplication code. The POMcan reroute flash accesses to internal memory or tothe EMIF, thus avoiding the reprogramming stepsnecessary for parameterupdates in flash.
With integrated safety features and a wide choice of communication andcontrolperipherals, the RM46Lx30deviceis an ideal solution forhigh-performance real-time control applications with safety-critical
- High-Performance Microcontroller for Safety-Critical Applications
- Dual CPUs Running in Lockstep
- ECC on Flash and RAM Interfaces
- Built-In Self-Test (BIST) for CPU and On-chip RAMs
- Error Signaling Module With Error Pin
- Voltage and Clock Monitoring
- ARM Cortex-R4F 32-Bit RISC CPU
- 1.66 DMIPS/MHz With 8-Stage Pipeline
- FPU With Single- and Double-Precision
- 12-Region Memory Protection Unit (MPU)
- Open Architecture With Third-Party Support
- Operating Conditions
- Up to 200-MHz System Clock
- Core Supply Voltage (VCC): 1.14 to 1.32 V
- I/O Supply Voltage (VCCIO): 3.0 to 3.6 V
- Integrated Memory
- 1.25MB of Program Flash With ECC (RM46L830)
- 1MB of Program Flash With ECC (RM46L430)
- 192KB of RAM With ECC (RM46L830)
- 128KB of RAM With ECC (RM46L430)
- 64KB of Flash for Emulated EEPROM With ECC
- 16-Bit External Memory Interface (EMIF)
- Common Platform Architecture
- Consistent Memory Map Across Family
- Real-Time Interrupt (RTI) Timer (OS Timer)
- 128-Channel Vectored Interrupt Module (VIM)
- 2-Channel Cyclic Redundancy Checker (CRC)
- Direct Memory Access (DMA) Controller
- 16 Channels and 32 Peripheral Requests
- Parity Protection for Control Packet RAM
- DMA Accesses Protected by Dedicated MPU
- Frequency-Modulated Phase-Locked Loop (FMPLL) With Built-In SlipDetector
- Separate Nonmodulating PLL
- IEEE 1149.1 JTAG, Boundary Scan and ARM CoreSight Components
- Advanced JTAG Security Module (AJSM)
- Calibration Capabilities
- Parameter Overlay Module (POM)
- 16 General-Purpose Input/Output (GPIO) Pins Capable of GeneratingInterrupts
- Enhanced Timing Peripherals for Motor Control
- 7 Enhanced Pulse Width Modulator (ePWM) Modules
- 6 Enhanced Capture (eCAP) Modules
- 2 Enhanced Quadrature Encoder Pulse (eQEP) Modules
- Two Next Generation High-End Timer (N2HET) Modules
- N2HET1: 32 Programmable Channels
- N2HET2: 18 Programmable Channels
- 160-Word Instruction RAM Each With Parity Protection
- Each N2HET Includes Hardware Angle Generator
- Dedicated High-End Timer Transfer Unit (HTU) for Each N2HET
- Two 12-Bit Multibuffered Analog-to-Digital Converter (MibADC)Modules
- ADC1: 24 Channels
- ADC2: 16 Channels Shared With ADC1
- 64 Result Buffers Each With Parity Protection
- Multiple Communication Interfaces
- 2-Port USB Host Controller
- One Full-Speed USB Device Port
- Three CAN Controllers (DCANs)
- 64 Mailboxes Each With Parity Protection
- Compliant to CAN Protocol Version 2.0A and 2.0B
- Inter-Integrated Circuit (I2C)
- Three Multibuffered Serial Peripheral Interface (MibSPI) Modules
- 128 Words Each With Parity Protection
- 8 Transfer Groups
- Up to Two Standard Serial Peripheral Interface (SPI) Modules
- Two UART (SCI) Interfaces, One With Local Interconnect Network (LIN2.1) Interface Support
- 144-Pin Quad Flatpack (PGE) [Green]
- 337-Ball Grid Array (ZWT) [Green]
|Frequency||200 MHz||Product Lifecycle Status||Active|
|Clock Speed||200 MHz||Packaging||Tray|
|RAM Memory Size||196608 B||Case/Package||LFBGA|
|FLASH Memory Size||1310720 B||RoHS||Compliant|
|Number of UARTs||2||Lead Free Status||Lead Free|
RM46L830 Family Datasheet
RM46L830CZWTT Related Products
Ratings and Reviews (0)
- 0 / 5
- 5 Stars 0%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
Estimated Delivery Time: Aug 09 - Aug 14 days (choose Expedited at checkout).
Shipping & Payment
|Shipping Type||Ship Fee||Lead Time|
$20.00-$40.00 (0.50 KG)
$20.00-$40.00 (0.50 KG)
$20.00-$45.00 (0.50 KG)
$25.00-$65.00 (0.50 KG)
$25.00-$45.00 (0.50 KG)
|REGISTERED AIR MAIL||
$2.00-$3.00 (0.10 KG)
Processing Time：Shipping fee depend on different zone and country.
|Terms of payment||Hand Fee||Payment Site|
charge US$30.00 banking fee.
charge 4.0% service fee.
charge 3.5% service fee.
charge US$0.00 banking fee.
charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step6:bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: What are the advantages of buying from Jotrin?
Jotrin is your second procurement department of the electronic components. The platform has supported by over 1000 original factories and authorized agents,
over 10 years of experience in the electronic components area.
Jotrin is aiming to help these manufacturers, EMS, PCBA clients offer a whole BOM solution with the assistant of their professional BOM team and Intelligent BOM software.
We can help you:
1. Do the cost down for your current regular orders.
2. Decrease your suppliers' management costs and suppliers' qty.
3. Improve your efficiency, we can offer the whole BOM one-stop supply chain service.
- Q: How can Jotrin guarantee to be the original manufacturers or the agents?
- We have a professional business development department to strictly examine and verify the qualifications of the original manufacturers and the agents. All the suppliers must pass the qualification examination before putting their materials on the shelves; We pay more attention to the channel and quality of products than any other customers, we are strict with supplier audit, you can rest assured that choice.
- Q: What are the business hours of Jotrin?
Although we accept quotation requests and orders anytime 24 hours a day regardless of business days and hours, we provide quotations and process orders during business time.
Business Hours: Monday - Friday 9:00am - 9:00pm (GMT+8)
- Q: Is the inventory and price seen on the platform accurate?
- Inventory fluidity big, unable to update in time, it will be updated periodically within 24 hours. After placing the order, it is suggested to confirm the order with the supplier or the online customer service of Jotrin before paying.
- Q: Can I place an order offline?
Yes. We accept offline orders.
You can contact our customer service representatives to help you customize your requirements.
If you'd like to submit your purchase orders via email, please send us a note to firstname.lastname@example.org. One of our customer service representatives will help you.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Western Union, Paypal, and Escrow is all acceptable.
- Q: How is the shipping arranged?
- Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail. No shipment handling charges be included.
- Q: How can I track my package?
- Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status of your order and its tracking number, if applicable. When the tracking numbers are present, you can click on the link and it will take you directly to the carriers' website so that you can track your order. Note: It may take up to 24 hours before carriers will display tracking information.
- Q: When can I receive my package？
- In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the product we delivered, we will accept the replacement or return of the product only when all of the below conditions are fulfilled:
(1)There are any problems with the product we delivered, such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of the product.
(3)The product is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy
- Q: How to contact us and get support?
- Need any After-Sales service, please feel free contact us: email@example.com
- 1.Design of Software Phase-locking Based on DSP2812
- 2.Design of audio signal acquisition system based on TMS320C6713
- 3.Gate Drivers and NexFET Power Blocks deliver 700 W of power
- 4.MSP430 FRAM microcontroller writes without pre-erase or buffering.
- 5.RRIO Op Amp drives ADCs in high-voltage, precision DAQ systems.
- 6.High-Resolution ULP SAR ADCs consume 5.5 mW at 1 MSPS.
MSP430FR6927IPM MSP430FR6927 16MHz ULP Microcontroller featuring 64KB FRAM, 2KB SRAM, 52 IO, 8CH ADC12, LCD, AES 64-LQFP -40℃ to 85℃
MSP430FR6877IPN MSP430FR6877 16MHz ULP Microcontroller featuring 64KB FRAM, 2KB SRAM, 83 IO, 16CH ADC12, LCD 80-LQFP -40℃ to 85℃
TM4C1231E6PZI7 MCU 32Bit Tiva C ARM Cortex M4F RISC 128KB Flash 1.2V/3.3V 100Pin LQFP
LT3495EDDB#PBF LINEAR TECHNOLOGY LT3495EDDB#PBF DC-DC Switching Regulator Boost, Adjustable, 2.5V-16Vin, 40V/650mA out, 45kHz, DFN-10
ADN2913ACPZ-RL7 Continuous Rate 6.5Mbps to 8.5Gbps Clock and Data Recovery IC with Integrated Limiting Amp/EQ
STEVAL-IKR002V3D RF Development Tools SPIRIT1 - Low Data Rate Transceiver - 433MHz - DAUGHTER BOARD