?Quad ISDN Echocancellation Circuit Analog Front End - 2B1Q/4B3T Code?
Manufacturer : | Infineon Technologies Corporation |
---|---|
Package/Case : | QFP |
Product Categories : | Integrated Circuits (ICs) |
Datasheet: | PEF24902H Datasheet (PDF) |
RoHs Status: | Lead free/RoHS Compliant |
In-stock: | 210 |
Quantity
Request for Quotation
PEF24902H Product Details
All timing signals are derived from a 15.36 MHz system clock. The 15.36 MHz clock can be provided by the IEC-4-AFE-X Version 3.2 by a crystal based PLL, which is synchronized to either an 8 kHz or a 2048 kHz clock at pin CLOCK. The frequency at pin CLOCK is detected automatically.
The PLL is set to the nominal frequency either by a POR or by a falling edge at the RES pin. When the reference clock (CLOCK) is applied, the PLL starts to synchronize.
The 15.36 MHz clock can also be provided externally at pin CL15 without making use of the internal PLL. In this mode the pin XIN must be tied to either VDD or GND. An internal power-on-reset circuitry assures that the pin CL15 is an input until a 15.36 MHz clock is detected at the output of the PLL/oscillator.
To enable error-free data transport to/from the Quad IEC DFE-T/Q, the clocks DCL and FSC from the IOM®-2-interface must be synchronous to the 15.36 MHz signal. Therefore it is recommended to use the same signal for FSC and as input to CLOCK pin at the IEC4-AFE-X Version 3.2 when the internal PLL is used to generate the 15.36 MHz clock.
If another clock source is used for CLOCK, e.g. the 2048 kHz DCL, a common time base must be guaranteed. This is usually achieved if FSC is derived from DCL by dividing it directly by 256.
Any constant phase difference between the time bases of both clocks is possible, but the devices have currently been qualified and released only for using the same FSC signal for the Quad IEC DFE-T/Q and for IEC-4-AFE-X Version 3.2.
Feature
• Four port ISDN Echo Cancellation Circuit Analog Frontend
• Offers all features of AFE V2.1
• Integrated digital transmit low-pass filter, which obsoletes the need for an discrete, passive splitter device
• Conforms in connection with GEMINAX MAX chip set to Ref [3.], especially to the following ISDN PSD masks:
- ’PSD mask for a 4B3T ISDN system with integrated splitter’ acc. to Ref [3.] (4B3T ADSL friendly, compatible to ADSL US spectrum down to 138 kHz)
- ’PSD mask for a 2B1Q ISDN system with integrated splitter’ acc. to Ref [3.] (2B1Q ADSL friendly, compatible to ADSL US spectrum down to 120 kHz)
• Footprint compatible to AFE V2.1 (Ref [1.])
• Serial control interface for communication with GEMINAX MAX chip set
(Picture: Pinout)
(Picture: Diagram)
Technical Parameters
- Manufacturer
- INFINEON
- Packing
- Tape & Reel (TR)/Cut Tape (CT)/Tray/Tube
- RoHs Status
- Lead free/RoHS Compliant
- Package/Case
- QFP
PEF24902H Datasheet
-
PEF24902
PEF24902H Related Products
Ratings and Reviews
- 0 / 5
- 5 Stars 0%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
- Shipping:
Shipping & Payment
Shipping
- Shipping Type
- Ship Fee
- Lead Time
- DHL
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- Fedex
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- UPS
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- TNT
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- EMS
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time:Shipping fee depend on different zone and country.
Payment
- Terms of payment
- Hand Fee
- Wire Transfer
- charge US$30.00 banking fee.
- Paypal
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from US$2.00.
-
90 days quality guarantee for all products.
Packing
-
Step1: Products
-
Step2: Vacuum Packaging
-
Step3: Anti-Static Bag
-
Step4: Individual Packaging
-
Step5: Packaging Boxes
-
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
FAQ:
- Q: How does Jotrin guarantee that PEF24902H is the original manufacturer or agent of INFINEON?
- We have a professional business development department to strictly test and verify the qualifications of INFINEON original manufacturers and agents. All INFINEON suppliers must pass the qualification review before they can publish their PEF24902H devices; we pay more attention to the channels and quality of PEF24902H products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of PEF24902H chips? Including INFINEON original factory information, application, PEF24902H pictures?
- You can use Jotrin's intelligent search engine, or filter by Integrated Circuits (ICs) category, or find it through Infineon Technologies Corporation Information page.
- Q: Are the INFINEON's PEF24902H price and stock displayed on the platform accurate?
- The INFINEON's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for PEF24902H, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
-
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online. - Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
-
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days. - Q: What is the process for returns or replacement of PEF24902H?
-
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the PEF24902H we delivered, we will accept the replacement or return of the PEF24902H only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of PEF24902H.
(3)The PEF24902H is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy. - Q: How to contact us and get support, such as PEF24902H datasheet pdf, PEF24902 pin diagram?
- Need any After-Sales service, please feel free contact us: sales@jotrin.com
Infineon Technologies Corporation
- 1.MOSFET vs. BJT: Understanding the Differences and Choosing the Right One
- 2.The Ultimate Guide to IR2104 Half Bridge MOSFET Driver
- 3.Everything about N-channel hexfet power mosfet-IRF3205
- 4.Operational Amplifier (Op Amp) Basics, Uses and Applications
- 5.What is PIN Diode? Definition, Structure, Features & Applications
- 6.eSIM: Connectivity made simple
-
PEF24624EV1.2-G Network Controller & Processor IC Quad ISDN Hi V Power Controller
-
PEF24622EV2.1 IC SHDSL TRANSCEIVER BGA-388
-
PEF24625EV1.2 IC SHDSL TRANSCEIVER BGA-484
-
PEF24901HV2.2 Telecom Interface ICs ISDN
-
PEF2466HV2.2 Audio CODECs POTS
-
PEF2426V1.1 INFINEON