40-bit Fm+ I2C-bus advanced I/O port with RESET, OE and INT
- Manufacturer :
- Package/Case :
- Product Categories :
- Logic ICs
- PCA9698BS PDF
- RoHs Status:
- Lead free / RoHS Compliant
Request for Quotation
PCA9698BS Product Details
The PCA9698 provides 40-bit parallel input/output (I/O) port expansion for I2C-bus applications organized in 5 banks of 8 I/Os. At 5 V supply voltage, the outputs are capable of sourcing 10 mA and sinking 25 mA with a total package load of 1 A to allow direct driving of 40 LEDs. Any of the 40 I/O ports can be configured as an input or output. The PCA9698 is the first GPIO device in a new Fast-mode Plus (Fm+) family. Fm+ devices offer higher frequency (up to 1 MHz) and longer, more densely populated bus operation (up to 4000 pF). The device is fully configurable: output ports can be programmed to be totem-pole or open-drain and logic states can change at either the Acknowledge (bank change) or the Stop Command (global change), each input port can be masked to prevent it from generating interrupts when its state changes, I/O data logic state can be inverted when read by the system master. An open-drain interrupt output pin (INT) allows monitoring of the input pins and is asserted each time a change occurs in one or several input ports (unless masked). The Output Enable pin (OE) 3-states any I/O selected as output and can be used as an input signal to blink or dim LEDs (PWM with frequency > 80 Hz and change duty cycle). A ‘GPIO All Call’ command allows to program multiple Advanced GPIOs at the same time even if they have different I2C-bus addresses. This allows optimal code programming when more than one device needs to be programmed with the same instruction or if all outputs need to be turned on or off at the same time (for example, LED test). The Device ID, hard coded in the PCA9698, allows the system master to read manufacturer, part type and revision information. The SMBus Alert feature allows the SMBALERT pins of multiple devices with this feature to be connected together to form a wired-AND signal and to be used in conjunction with the SMBus Alert Response Address. The internal Power-On Reset (POR) or hardware reset pin (RESET) initializes the 40 I/Os as inputs. Three address select pins configure one of 64 slave addresses. The PCA9698 is available in 56-pin TSSOP and HVQFN packages and is specified over the −40 °C to +85 °C industrial temperature range.
Features and benefits
■1 MHz Fast-mode Plus I2C-bus serial interface
■Compliant with I2C-bus Fast-mode (400 kHz) and Standard-mode (100 kHz）
■2.3 V to 5.5 V operation with 5.5 V tolerant I/Os
■40 configurable I/O pins that default to inputs at power-up
■ Outputs:Programmable totem-pole (10 mA source, 25 mA sink) or open-drain (25 mA sink)with controlled edge rate output structure. Default to totem-pole on power-up.Active LOW Output Enable (OE) input pin 3-states all outputs. Polarity can be programmed to active HIGH through the I2C-bus. Defaults to OE on power-up.Output state change programmable on the Acknowledge or the STOP Command to update outputs byte-by-byte or all at the same time respectively. Defaults to Acknowledge on power-up.
■ Inputs:Open-drain active LOW Interrupt (INT) output pin allows monitoring of logic level change of pins programmed as
inputs.Programmable Interrupt Mask Control for input pins that do not require an interrupt when their states change.Polarity Inverter register allows inversion of the polarity of the I/O pins when read.
■Active LOW SMBus Alert (SMBALERT) output pin allows to initiate SMBus ‘Alert
■Response Address’ sequence. Own slave address sent when sequence initiated.
■Active LOW Reset (RESET) input pin resets device to power-up default state
■GPIO All Call address allows programming of more than one device at the same time with the same parameters
■64 programmable slave addresses using 3 address pins
■Readable Device ID (manufacturer, device type and revision)
■Designed for live insertion in PICMG applications
■Minimize line disturbance (IOFF and power-up 3-state)
■Signal transient rejection (50 ns noise filter and robust I2C-bus state machine)
■Low standby current
■−40 °C to +85 °C operation
■ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per
JESD22-A115, and 1000 V CDM per JESD22-C101
■Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100mA
■Packages offered: TSSOP56, and HVQFN56
(Picture:Pinout / Diagram)
|Manufacturer||PHILIS||RoHs Status||Lead free / RoHS Compliant|
|Packing||Tape & Reel (TR)/Cut Tape (CT)/Tray/Tube||Package/Case||QFN-56|
PCA9698BS Related Products
Ratings and Reviews (1)
- 5 / 5
- 5 Stars 100%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
****gey Vasilievich Zhez*****
Only Plus ++++++++++++++++++++++++++++
Estimated Delivery Time: Dec 01 - Dec 06 days (choose Expedited at checkout).
Shipping & Payment
|Shipping Type||Ship Fee||Lead Time|
$20.00-$40.00 (0.50 KG)
$20.00-$40.00 (0.50 KG)
$20.00-$45.00 (0.50 KG)
$25.00-$65.00 (0.50 KG)
$25.00-$45.00 (0.50 KG)
|REGISTERED AIR MAIL||
$2.00-$3.00 (0.10 KG)
Processing Time：Shipping fee depend on different zone and country.
|Terms of payment||Hand Fee||Payment Site|
charge US$30.00 banking fee.
charge 4.0% service fee.
charge 3.5% service fee.
charge US$0.00 banking fee.
charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step6:bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: What are the advantages of buying from Jotrin?
Jotrin is your second procurement department of the electronic components. The platform has supported by over 1000 original factories and authorized agents,
over 10 years of experience in the electronic components area.
Jotrin is aiming to help these manufacturers, EMS, PCBA clients offer a whole BOM solution with the assistant of their professional BOM team and Intelligent BOM software.
We can help you:
1. Do the cost down for your current regular orders.
2. Decrease your suppliers' management costs and suppliers' qty.
3. Improve your efficiency, we can offer the whole BOM one-stop supply chain service.
- Q: How can Jotrin guarantee to be the original manufacturers or the agents?
- We have a professional business development department to strictly examine and verify the qualifications of the original manufacturers and the agents. All the suppliers must pass the qualification examination before putting their materials on the shelves; We pay more attention to the channel and quality of products than any other customers, we are strict with supplier audit, you can rest assured that choice.
- Q: What are the business hours of Jotrin?
Although we accept quotation requests and orders anytime 24 hours a day regardless of business days and hours, we provide quotations and process orders during business time.
Business Hours: Monday - Friday 9:00am - 9:00pm (GMT+8)
- Q: Is the inventory and price seen on the platform accurate?
- Inventory fluidity big, unable to update in time, it will be updated periodically within 24 hours. After placing the order, it is suggested to confirm the order with the supplier or the online customer service of Jotrin before paying.
- Q: Can I place an order offline?
Yes. We accept offline orders.
You can contact our customer service representatives to help you customize your requirements.
If you'd like to submit your purchase orders via email, please send us a note to firstname.lastname@example.org. One of our customer service representatives will help you.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Western Union, Paypal, and Escrow is all acceptable.
- Q: How is the shipping arranged?
- Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail. No shipment handling charges be included.
- Q: How can I track my package?
- Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status of your order and its tracking number, if applicable. When the tracking numbers are present, you can click on the link and it will take you directly to the carriers' website so that you can track your order. Note: It may take up to 24 hours before carriers will display tracking information.
- Q: When can I receive my package？
- In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the product we delivered, we will accept the replacement or return of the product only when all of the below conditions are fulfilled:
(1)There are any problems with the product we delivered, such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of the product.
(3)The product is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy
- Q: How to contact us and get support?
- Need any After-Sales service, please feel free contact us: email@example.com
Popular Electronic Parts
PCA9675PW Remote 16-bit I/O expander for Fm+ I2C-bus with interrupt - # of Addresses: 64 ; I2C-bus: 1000 kHz; I2C-bus interface: Fast Mode Plus 30 mA SDA outputs for 4000 pF bus ; Interrupt output: yes ; Max Sink Current per bit: 25 mA; Max Sink Current, per p,I/O Expanders, Repeaters & Hubs 16-BIT I2C FM+ QB GPIO RST PU
PCA9674PW Remote 8-bit I/O expander for Fm+ I²C-bus with interrupt - # of Addresses: 64 ; I2C-bus: 1000 kHz; I2C-bus interface: Fast Mode Plus 30 mA SDA outputs for 4000 pF bus ; Interrupt output: yes ; Max Sink Current per bit: 25 mA; Max Sink Current, p,I/O Expanders, Repeaters & Hubs 8-BIT I2C FM+ QB GPIO RST PU
PCA9634PW 8-bit Fm+ I2C-bus LED driver - # of Addresses: 126 ; Enable: yes ; I2C-bus: 1000 kHz; I2C-bus interface: Fast Mode Plus 30 mA SDA outputs for 4000 pF bus ; Max Sink Current per bit: 25 mA; Max Sink Current, per package: 200 mA; Number of bits: 8 ; Op,LED Drivers 8BIT I2C FM+ TP LED CON RST OE
PCA9635PW 16-bit Fm I2C-bus LED driver - # of Addresses: 126 ; Enable: yes ; I2C-bus: 1000 kHz; I2C-bus interface: Fast Mode Plus 30 mA SDA outputs for 4000 pF bus ; Max Sink Current per bit: 25 mA; Max Sink Current, per package: 400 mA; Number of bits: 16 ; O,LED Drivers 8BIT I2C FM+ TP LED CON RST OE
PCA9665PW Fm parallel bus to I2C-bus controller - # of Addresses: 128 ; Details: Internal trimmed 28.5 MHz oscillator ; I2C-bus: 1000 kHz; I2C-bus interface: Fast Mode Plus 30 mA SCL/SDA outputs for 4000 pF bus ; Interrupt: 0-1 ; Operating temperature: -40~85
PCA9617ADPJ Interface - Signal Buffers, Repeaters Level Translating I2 C-Bus Repeater