RF Transceiver Module 2.5V 32-Pin VQFN EP T/R
Request for Quotation
ONET1130ECRSMR Product Details
The ONET1130ECRSMR is a 2.5 V integrated modulator driver and limiting amplifier with transmit and receive clock and data recovery (CDR) designed to operate between 9.80 Gbps and 11.7 Gbps without the need for a reference clock. Optical and electrical loopback are included. CDR bypass mode can be used for operation at lower data rates and a two-wire serial interface allows digital control of the features.
The transmit path consists of an adjustable input equalizer for equalization of up to 300 mm (12 inches) of microstrip or stripline transmission line of FR4 printed circuit boards, a multi-rate CDR and an output modulator driver. Output waveform control, in the form of cross-point adjustment and de-emphasis are available to improve the optical eye mask margin. Bias current for the laser is provided and an integrated automatic power control (APC) loop to compensate for variations in average optical power over voltage, temperature and time is included.
The receive path consists of a limiting amplifier with programmable equalization and threshold adjustment, a multi-rate CDR and output de-emphasis to compensate for frequency dependent loss of connectors, microstrips or striplines connected to the output of the device, The receiver output amplitude and loss of signal assert level can be adjusted.
The ONET1130ECRSMR contains internal analog to digital and digital to analog converters to support transceiver management and eliminate the need for special purpose microcontrollers.
The transceiver is characterized for operation from –40°C to 100°C case temperatures and is available in a small footprint 4mm × 4mm, 32 pin RoHS compliant VQFN package.
- Dual CDR with 9.80-11.7 Gbps Reference-Free
- 2-Wire Digital Interface with Integrated DACs and
ADC for Control and Diagnostic Management
- Output Polarity Select for TX and RX
- Programmable Jitter Transfer Bandwidth
- Electrical and Optical Loopback.
- CDR Bypass Mode for Low Data Rate Operation
- Integrated Modulator Driver with Output Amplitude
up to 2 VPP Single-ended and Bias Current
up to 150 mA Source.
- Automatic Power Control (APC) Loop with
Selectable Monitor PD Range
- Programmable TX Input Equalizer
- TX Cross-Point Adjust and De-Emphasis
- Includes Laser Safety Features
- Integrated Limiting Amplifier with Programmable
- Adjustable RX Equalization and Input Threshold
- Programmable RX Output Voltage and De-
- Power Supply Monitor and Temperature Sensor
- Single 2.5-V Supply
- –40°C to 100°C Operation
- Surface Mount 4 mm × 4 mm 32-Pin QFN
Package with 0.4 mm Pitch
|Type||Limiting Amplifier||Package / Case||32-VFQFN Exposed Pad|
|Applications||Optical Networks||Supplier Device Package||32-VQFN (4x4)|
|Mounting Type||Surface Mount|
ONET1130EC Family Datasheet
ONET1130ECRSMR Related Products
Ratings and Reviews
- 0 / 5
- 5 Stars 0%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
Estimated Delivery Time: Jan 29 - Feb 03 days (choose Expedited at checkout).
Shipping & Payment
|Shipping Type||Ship Fee||Lead Time|
$20.00-$40.00 (0.50 KG)
$20.00-$40.00 (0.50 KG)
$20.00-$45.00 (0.50 KG)
$25.00-$65.00 (0.50 KG)
$25.00-$45.00 (0.50 KG)
|REGISTERED AIR MAIL||
$2.00-$3.00 (0.10 KG)
Processing Time：Shipping fee depend on different zone and country.
|Terms of payment||Hand Fee||Payment Site|
charge US$30.00 banking fee.
charge 4.0% service fee.
charge 3.5% service fee.
charge US$0.00 banking fee.
charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step6:bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: How does Jotrin guarantee that ONET1130ECRSMR is the original manufacturer or agent of TI?
- We have a professional business development department to strictly test and verify the qualifications of TI original manufacturers and agents. All TI suppliers must pass the qualification review before they can publish their ONET1130ECRSMR devices; we pay more attention to the channels and quality of ONET1130ECRSMR products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of ONET1130ECRSMR chips? Including TI original factory information, Transceiver application, ONET1130ECRSMR pictures?
- You can use Jotrin's intelligent search engine, or filter by Semiconductors ; Interface ; Optical networking ICs category, or find it through Texas Instruments, Inc Information page.
- Q: Are the TI's ONET1130ECRSMR price and stock displayed on the platform accurate?
- The TI's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for ONET1130ECRSMR, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
- Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement of ONET1130ECRSMR?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the ONET1130ECRSMR we delivered, we will accept the replacement or return of the ONET1130ECRSMR only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of ONET1130ECRSMR.
(3)The ONET1130ECRSMR is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
- Q: How to contact us and get support, such as ONET1130ECRSMR datasheet pdf, ONET1130EC pin diagram?
- Need any After-Sales service, please feel free contact us: email@example.com
Texas Instruments, Inc
- 1.Introduction to Digital Signal Processor
- 2.How to use LM3886 DIY Gainclone power amplifier
- 3.Design of Software Phase-locking Based on DSP2812
- 4.The design of intelligent instrument based on DSP device TMS320C32 and CPLD chip
- 5.Design of audio signal acquisition system based on TMS320C6713
- 6.Gate Drivers and NexFET Power Blocks deliver 700 W of power
NX5P3290UKZ USB Interface, USB Type-C and Power Delivery (PD) Controller, 4 V, 5.5 V, WLCSP, 16 Pins
NX3DV221TKX USB Interface, High Speed, High Speed USB Switch, USB 2.0, 2.3 V, 3.6 V, HVSON, 10 Pins
NTB0104BQ-Q100X Level Translator, Transceiver, AEC-Q100, 4 Inputs, 5.9ns, 1.65V to 5.5V, DHVQFN-14
NX20P5090UKAZ Power Load Switch, AEC-Q100, High Side, 1 Output, 20 V, 5 A/0.03 ohm out, WLCSP-15
NX5P2090UKZ Power Load Switch, High Side, 1 Output, 5.5 V, 2 A/0.06 ohm out, WLCSP-9
NTS0102DP-Q100H Voltage Level Translator 2-CH Bidirectional Automotive 8-Pin TSSOP T/R