Products > Integrated Circuits (ICs) > Embedded Processors & Controllers > MPC8270ZUUPEA

Images are for reference only.

MPC8270ZUUPEA

Hot Sale

MPU PowerQUICC II MPC82xx Processor RISC 32bit 0.13um 450MHz 3.3V 480-Pin TBGA Tray

  • Package/Case :
  • BGA480
  • Product Categories :
  • Microcontrollers (MPU),
  • RoHs Status:
  • Lead free / RoHS Compliant
  • In-stock:
  • 70

Quantity  

Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.


MPC8270ZUUPEA Product Details

Overview

This table shows the functionality supported by each SoC in the MPC8280 family.

Devices in the MPC8280 family are available in four packages—the standard ZU and VV packages and the alternate VR or ZQ packages—as shown in Table 2. Note that throughout this document, references to the MPC8280 and the MPC8270ZUUPEA are inclusive of VR and ZQ package devices unless otherwise specified. For more information on VR and ZQ packages, contact your Freescale sales office. For package ordering information, see Section 10, “Ordering Information.”

This figure shows the block diagram of the SoC. Shaded portions are SoC-specific; see the notes below the figure. 

Features

The major features of the SoC are as follows: 

• Dual-issue integer (G2_LE) core 

— A core version of the EC603e microprocessor 

— System core microprocessor supporting frequencies of 166–450 MHz 

— Separate 16 KB data and instruction caches: 

 – Four-way set associative 

 – Physically addressed 

 – LRU replacement algorithm 

— Power Architecture®-compliant memory management unit (MMU)

— Common on-chip processor (COP) test interface 

— High-performance (SPEC95 benchmark at 450 MHz; 855 Dhrystones MIPS at 450 MHz) 

— Supports bus snooping 

— Support for data cache coherency 

— Floating-point unit (FPU) 

• Separate power supply for internal logic and for I/O 

• Separate PLLs for G2_LE core and for the communications processor module (CPM) 

— G2_LE core and CPM can run at different frequencies for power/performance optimization 

— Internal core/bus clock multiplier that provides ratios 2:1, 2.5:1, 3:1, 3.5:1, 4:1, 4.5:1, 5:1, 6:1, 7:1, 8:1 

— Internal CPM/bus clock multiplier that provides ratios 2:1, 2.5:1, 3:1, 3.5:1, 4:1, 5:1, 6:1, 8:1 ratios 

• 64-bit data and 32-bit address 60x bus 

— Bus supports multiple master designs 

— Supports single- and four-beat burst transfers 

— 64-, 32-, 16-, and 8-bit port sizes controlled by on-chip memory controller 

— Supports data parity or ECC and address parity 

• 32-bit data and 18-bit address local bus 

— Single-master bus, supports external slaves 

— Eight-beat burst transfers 

— 32-, 16-, and 8-bit port sizes controlled by on-chip memory controller 

• 60x-to-PCI bridge 

— Programmable host bridge and agent 

— 32-bit data bus, 66.67/83.3/100 MHz, 3.3 V 

— Synchronous and asynchronous 60x and PCI clock modes 

— All internal address space available to external PCI host 

— DMA for memory block transfers 

— PCI-to-60x address remapping

• PCI bridge 

— PCI Specification Revision 2.2 compliant and supports frequencies up to 66 MHz 

— On-chip arbitration 

— Support for PCI-to-60x-memory and 60x-memory-to-PCI streaming 

— PCI host bridge or peripheral capabilities 

— Includes 4 DMA channels for the following transfers:

 – PCI-to-60x to 60x-to-PCI

 – 60x-to-PCI to PCI-to-60x

 – 60x-to-PCI to 60x-to-PCI 

— Includes all of the configuration registers (which are automatically loaded from the EPROM and used to configure the MPC8280) required by the PCI standard as well as message and doorbell registers 

— Supports the I2O standard 

— Hot-swap friendly (supports the hot swap specification as defined by PICMG 2.1 R1.0 August 3, 1998) 

— Support for 66.67/83.33/100 MHz, 3.3 V specification 

— 60x-PCI bus core logic that uses a buffer pool to allocate buffers for each port 

— Uses the local bus signals, removing need for additional pins 

• System interface unit (SIU) 

— Clock synthesizer 

— Reset controller 

— Real-time clock (RTC) register 

— Periodic interrupt timer 

— Hardware bus monitor and software watchdog timer 

— IEEE 1149.1 JTAG test access port 

• 12-bank memory controller 

— Glueless interface to SRAM, page mode SDRAM, DRAM, EPROM, Flash, and other user-definable peripherals 

— Byte write enables and selectable parity generation 

— 32-bit address decodes with programmable bank size 

— Three user-programmable machines, general-purpose chip-select machine, and page mode pipeline SDRAM machine 

— Byte selects for 64-bit bus width (60x) and byte selects for 32-bus width (local) 

— Dedicated interface logic for SDRAM

• CPU core can be disabled and the device can be used in slave mode to an external core 

• Communications processor module (CPM) 

— Embedded 32-bit communications processor (CP) uses a RISC architecture for flexible support for communications protocols 

— Interfaces to G2_LE core through an on-chip 32 KB dual-port data RAM, an on-chip 32 KB dual-port instruction RAM and DMA controller 

— Serial DMA channels for receive and transmit on all serial channels 

— Parallel I/O registers with open-drain and interrupt capability 

— Virtual DMA functionality executing memory-to-memory and memory-to-I/O transfers 

— Three fast communications controllers supporting the following protocols:

 – 10/100-Mbit Ethernet/IEEE 802.3 CDMA/CS interface through media independent interface (MII) or reduced media independent interface (RMII) 

 – ATM—Full-duplex SAR protocols at 155 Mbps, through UTOPIA interface, AAL5, AAL1, AAL0 protocols, TM 4.0 CBR, VBR, UBR, ABR traffic types, up to 64 K external connections (no ATM support for the MPC8270) 

 – Transparent

 – HDLC—Up to T3 rates (clear channel)

 – FCC2 can also be connected to the TC layer (MPC8280 only) 

— Two multichannel controllers (MCCs) (one MCC on the MPC8270)

 – Each MCC handles 128 serial, full-duplex, 64-Kbps data channels. Each MCC can be split into four subgroups of 32 channels each.

 – Almost any combination of subgroups can be multiplexed to single or multiple TDM interfaces up to four TDM interfaces per MCC 

— Four serial communications controllers (SCCs) identical to those on the MPC860, supporting the digital portions of the following protocols: 

 – Ethernet/IEEE 802.3 CDMA/CS

 – HDLC/SDLC and HDLC bus

 – Universal asynchronous receiver transmitter (UART)

 – Synchronous UART

 – Binary synchronous (BISYNC) communications

 – Transparent 

• Universal serial bus (USB) controller 

— Supports USB 2.0 full/low rate compatible 

— USB host mode

 – Supports control, bulk, interrupt, and isochronous data transfers

 – CRC16 generation and checking

 – NRZI encoding/decoding with bit stuffing

 – Supports both 12- and 1.5-Mbps data rates (automatic generation of preamble token and data rate configuration). Note that low-speed operation requires an external hub.

 – Flexible data buffers with multiple buffers per frame

 – Supports local loopback mode for diagnostics (12 Mbps only)

— Supports USB slave mode

 – Four independent endpoints support control, bulk, interrupt, and isochronous data transfers

 – CRC16 generation and checking

 – CRC5 checking

 – NRZI encoding/decoding with bit stuffing

 – 12- or 1.5-Mbps data rate

 – Flexible data buffers with multiple buffers per frame

 – Automatic retransmission upon transmit error 

— Two serial management controllers (SMCs), identical to those of the MPC860

 – Provides management for BRI devices as general-circuit interface (GCI) controllers in time-division-multiplexed (TDM) channels

 – Transparent

 – UART (low-speed operation) 

— One serial peripheral interface identical to the MPC860 SPI 

— One I2 C controller (identical to the MPC860 I2C controller)

 – Microwire compatible

 – Multiple-master, single-master, and slave modes 

— Up to eight TDM interfaces (four on the MPC8270)

 – Supports two groups of four TDM channels for a total of eight TDMs (one group of four on the MPC8270ZUUPEA and the MPC8275)

 – 2,048 bytes of SI RAM

 – Bit or byte resolution

 – Independent transmit and receive routing, frame synchronization

 – Supports T1, CEPT, T1/E1, T3/E3, pulse code modulation highway, ISDN basic rate, ISDN primary rate, Freescale interchip digital link (IDL), general circuit interface (GCI), and user-defined TDM serial interfaces 

— Eight independent baud rate generators and 20 input clock pins for supplying clocks to FCCs, SCCs, SMCs, and serial channels 

— Four independent 16-bit timers that can be interconnected as two 32-bit timers 

• Inverse multiplexing for ATM capabilities (IMA) (MPC8280 only). Supported by eight transfer transmission convergence (TC) layers between the TDMs and FCC2. 

• Transmission convergence (TC) layer (MPC8280 only)

MPC8270ZUUPEA

Feature

  • 603e core with 16K inst and 16K data caches
  • 64-bit 60x bus, 32-bit PCI/local bus
  • 128K ROM, 32K IRAM, 32K DPRAM
  • Three FCCs for 10/100 Ethernet
  • 128 HDLC channels, 4 TDMs
  • 4 SCCs, 2 SMCs, SPI, I2C
  • Memory controller built from SDRAM, UPM, GPCM machines
  • New features -- USB, RMII
  • Performance
    • 266 MHz CPU, 200 MHz CPM, 66 MHz bus
    • ~ 1W @ full performance, 1.5V
  • Technology
    • HIP7AP .13 micron, 3.3V I/O, 1.5V Core
    • 516 PBGA, 27x27mm, 1mm ball pitch
      • ZQ package has lead-bearing spheres
      • VR package is lead-free

MPC8270ZU (480 TBGA) Features

  • 603e core with 16K inst and 16K data caches
  • 64-bit 60x bus, 32-bit PCI bus
  • 128K ROM, 32K IRAM, 32K DPRAM
  • Three FCCs for 10/100 Ethernet
  • 128 HDLC channels, 4 TDMs
  • 4 SCCs, 2 SMCs, SPI, I2C
  • Memory controller built from SDRAM, UPM, GPCM machines
  • New features -- USB, RMII
  • Performance
    • 333 MHz CPU, 250 MHz CPM, 83 MHz bus
    • 450 MHz CPU, 300 MHz CPM, 100 MHz bus
    • Less than 2W @ full performance, 1.5V
  • Technology
    • HIP7AP, 3.3V I/O, 1.5V Core
    • 480 TBGA, 37.5x37.5mm, 1.27mm ball pitch

MPC8270ZUUPEA Pinout
(Picture: Pinout)

MPC8270ZUUPEA Block Diagram
(Picture: Diagram)

Technical Parameters

  • Core
  • 603e
  • Data Bus Width
  • 32 bit
  • Maximum Clock Frequency
  • 450 MHz
  • Maximum Operating Temperature
  • + 105 C
  • Mounting Style
  • SMD/SMT
  • Package / Case
  • TBGA
  • Minimum Operating Temperature
  • 0 C
  • Packaging
  • Tray
  • Processor Series
  • MPC8xxx
  • Factory Pack Quantity
  • 21
  • Tradename
  • PowerQUICC

MPC8270ZUUPEA Documents

MPC8270ZUUPEA Related Products

Ratings and Reviews (1)

  • 5 / 5
  • 5 Stars 100%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
  • **icha***
    2020-02-23

    Fantastic seller!!! Fast delivery!!!

Reviews
  • Ratings
  • Please rate the product!
Payment:
Payment
Shipping:
Shipping More
Estimated Delivery Time: Jun 20 - Jun 25 days (choose Expedited at checkout).

Shipping & Payment

Shipping

  • Shipping Type
  • Ship Fee
  • Lead Time
  • $20.00-$40.00 (0.50 KG)
  • 2-5 days
  • $20.00-$40.00 (0.50 KG)
  • 3-7 days
  • $20.00-$45.00 (0.50 KG)
  • 2-5 days
  • $25.00-$65.00 (0.50 KG)
  • 2-5 days
  • $25.00-$45.00 (0.50 KG)
  • 5-14 days
  • $2.00-$3.00 (0.10 KG)
  • 7-30 days

Processing Time:Shipping fee depend on different zone and country.


Payment

  • Terms of payment
  • Hand Fee
  • Payment Site
  • charge US$30.00 banking fee.
  • charge 4.0% service fee.
  • https://www.paypal.com/
  • charge 3.5% service fee.
  • charge US$0.00 banking fee.
  • https://www.westernunion.com/
  • charge US$0.00 banking fee.
  • http://global.moneygram.com/

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.

Packing

  • Step1:Product

    Step1: Products

  • Step2:Vacuum packaging

    Step2: Vacuum Packaging

  • Step3:Anti-static bag

    Step3: Anti-Static Bag

  • Step4:Individual packaging

    Step4: Individual Packaging

  • Step5:Packaging boxes

    Step5: Packaging Boxes

  • Step6:bar-code shipping tag

    Step6: Bar-Code Shipping Tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Jotrin ESD packing

Guarantees

1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.

FAQ:

Q: How does Jotrin guarantee that MPC8270ZUUPEA is the original manufacturer or agent of NXP?
We have a professional business development department to strictly test and verify the qualifications of NXP original manufacturers and agents. All NXP suppliers must pass the qualification review before they can publish their MPC8270ZUUPEA devices; we pay more attention to the channels and quality of MPC8270ZUUPEA products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
Q: How to find the detailed information of MPC8270ZUUPEA chips? Including NXP original factory information, Microcontrollers (MPU), application, MPC8270ZUUPEA pictures?
You can use Jotrin's intelligent search engine, or filter by Processors and Microcontrollers ; Legacy MCU/MPUs ; PowerQUICC Processors; category, or find it through NXP Semiconductor Information page.
Q: Are the NXP's MPC8270ZUUPEA price and stock displayed on the platform accurate?
The NXP's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for MPC8270ZUUPEA, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
Q: What forms of payment can I use in Jotrin?
TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement of MPC8270ZUUPEA?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the MPC8270ZUUPEA we delivered, we will accept the replacement or return of the MPC8270ZUUPEA only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of MPC8270ZUUPEA.
(3)The MPC8270ZUUPEA is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
Q: How to contact us and get support, such as MPC8270ZUUPEA datasheet pdf, MPC8270 pin diagram?
Need any After-Sales service, please feel free contact us: sales@jotrin.com

NXP Semiconductor

NXP
NXP Semiconductors delivers secure connectivity and infrastructure products for a smarter world, bringing solutions that make life easier, better and safer. As the world leader in secure connection solutions for embedded applications, NXP has been driving innovation in securely connected automotive...
  • MPC8260AZUMHBB
    MPC8260AZUMHBB MPU PowerQUICC II MPC82xx Processor RISC 32bit 0.25um 266MHz 3.3V 480-...
  • MPC8260AZUPIBB
    MPC8260AZUPIBB POWERQUICC II HIP4 REV B,Microcontrollers (MPU), POWERQUICC II HIP4 RE...
  • MPC8265ACZUMIBC
    MPC8265ACZUMIBC MPU PowerQUICC II MPC82xx Processor RISC 32bit 0.25um 266MHz 3.3V 480-...
  • MPC8270CVRMIBA
    MPC8270CVRMIBA PowerQUICC, 32 Bit Power Architecture, 266MHz, Comms Processor, PCI, U...
  • MPC8270CVVUPEA
    MPC8270CVVUPEA PowerQUICC, 32 Bit Power Architecture, 450MHz, Comms Processor, PCI, U...
  • MPC8270CZQMIBA
    MPC8270CZQMIBA PowerQUICC, 32 Bit Power Architecture, 266MHz, Comms Processor, PCI, U...

Certificates & Honor

Certificates & Honor