Images are for reference only.
USB Power SW USB Power Switch Single 7.5V 4A 8Pin SOIC N Tube
Request for Quotation
MIC2505BM Product Details
The MIC2505, MIC2505-1, MIC2505-2, and MIC2506 are single and dual integrated high-side power switches that consist of TTL compatible control/enable inputs, a charge pump, and protected N-channel MOSFETs. The MIC2505/6 family can be used instead of separate high-side drivers and MOSFETs in many low-voltage applications. The MIC2505/6 family controls voltages ranging from 2.7V to 7.5V. The MIC2505-series can deliver at least 2A continuous current while the MIC2506 can deliver at least 1A continuous current from each output. A slow turn-on feature prevents high inrush current when switching capacitive loads. The internal control circuitry is powered from the same 2.7V to 7.5V. Within the device’s input range, outputs can be forced higher than the input voltage when disabled. Multipurpose open-drain fault flag outputs indicate overcurrent limiting, open-load detection (except MIC2505-1 and -2 versions), thermal shutdown, or undervoltage lockout for each channel. Overcurrent limiting is internally fixed and requires no external components. Open-load detection is active when the switch is off. When off, a normal load pulls the output pin low. If the load is open, an optional, external, high-value resistor pulls the output pin high, triggering the fault flag. MIC2505-1 and -2 versions are tailored to Universal Serial Bus (USB) applications and do not include open-load detection. Thermal shutdown turns off the output if the die temperature exceeds approximately 135°C. If enabled, the switch automatically restarts when the temperature falls 10°C. Undervoltage lockout (UVLO) shuts off the output if the supply drops below 2.3V typical and reenables the output when the supply exceeds 2.5V typical.
- Low MOSFET on resistance to 2.7V
- 30mΩ typical at 5V (MIC2505-series)
- 35mΩ typical at 3.3V (MIC2505-series)
- 75mΩ typical at 5V (each MIC2506 output)
- 80mΩ typical at 3.3V (each MIC2506 output)
- 2.7V to 7.5V input
- 110µA typical on-state supply current
- 1µA typical off-state supply current
- Output can be forced higher than input (off-state)
- Current limit
- Thermal shutdown
- 2.5V undervoltage lockout (UVLO)
- Open-load detection (MIC2505BN/M and MIC2506BN/M only)
- Open-drain fault flag
- 5ms (slow) turn-on and fast turnoff
- Logic-level control/enable input
- Switch Type
- General Purpose
- Number of Outputs
- Ratio Input:Output
- Output Configuration
- High Side
- Output Type
- Voltage Load
- 2.7V ~ 7.5V
- Voltage Supply (Vcc/Vdd)
- Not Required
- Current Output (Max)
- Rds On (Typ)
- Input Type
- Slew Rate Controlled, Status Flag
- Fault Protection
- Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO
- Operating Temperature
- -40??C ~ 85??C (TA)
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Supplier Device Package
MIC2505 Technical Documentation of Application Note
MIC2505BM Related Products
Ratings and Reviews
- 0 / 5
- 5 Stars 0%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
Estimated Delivery Time: May 21 - May 26 days (choose Expedited at checkout).
Shipping & Payment
- Shipping Type
- Ship Fee
- Lead Time
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time：Shipping fee depend on different zone and country.
- Terms of payment
- Hand Fee
- Wire Transfer
- charge US$30.00 banking fee.
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step2: Vacuum Packaging
Step3: Anti-Static Bag
Step4: Individual Packaging
Step5: Packaging Boxes
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: How does Jotrin guarantee that MIC2505BM is the original manufacturer or agent of MICROCHIP?
- We have a professional business development department to strictly test and verify the qualifications of MICROCHIP original manufacturers and agents. All MICROCHIP suppliers must pass the qualification review before they can publish their MIC2505BM devices; we pay more attention to the channels and quality of MIC2505BM products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of MIC2505BM chips? Including MICROCHIP original factory information, PMIC - MOSFET, Bridge Drivers - Internal Switch application, MIC2505BM pictures?
- You can use Jotrin's intelligent search engine, or filter by Power Switches – Current Limit Switches Products category, or find it through Microchip Technology, Inc Information page.
- Q: Are the MICROCHIP's MIC2505BM price and stock displayed on the platform accurate?
- The MICROCHIP's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for MIC2505BM, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement of MIC2505BM?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the MIC2505BM we delivered, we will accept the replacement or return of the MIC2505BM only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of MIC2505BM.
(3)The MIC2505BM is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
- Q: How to contact us and get support, such as MIC2505BM datasheet pdf, MIC2505 pin diagram?
- Need any After-Sales service, please feel free contact us: email@example.com
Microchip Technology, Inc
- 1.Cryptography-Enabled 32-bit MCU adds security to IoT devices.
- 2.Power Monitoring IC monitors multiple loads in real-time.
- 3.Power Monitoring IC measures AC power in real-time.
- 4.AEC-Q100-Qualified Motor Driver provides high performance.
- 5.PWM Controllers combine 40 V operation with PMBus interfaces.
- 6.3D Gesture Controller enables one-step recognition design-in.
MIC24051YJL TR Conv DC-DC 4.5V to 19V Synchronous Step Down Single-Out 0.8V to 5.5V 6...
MIC2505-1YM Analog Switch / Multiplexer (Mux) IC; On-Resistance, Rds(on):35mohm; L...
MIC2505-2YM Analog Switch / Multiplexer (Mux) IC; On-Resistance, Rds(on):35mohm; L...
MIC2290YML TR Conv DC-DC 2.5V to 10V Step Up Single-Out 34V 8-Pin DFN EP T/R
MIC23150-4YMT-TR IC REG BUCK 1.2V 2A SYNC
MIC2290YML-TR IC REG BOOST ADJ 0.75A