ALL CATEGORIES
Images are for reference only.
Driver 0.5A 1-OUT Low Side Non-Inv Automotive 5-Pin SOT-23 T/R
| Manufacturer : | Microchip Technology, Inc |
|---|---|
| Package/Case : | SOT-23-5 |
| Product Categories : | Power Driver ICs |
| Datasheet: | MCP1402T-E/OT Datasheet (PDF) |
| RoHs Status: | Rohs |
| Marking Code: | GZxx |
| In-stock: | 124 |
Quantity
Request for Quotation
MCP1402T-E/OT Product Details
The MCP1401/02 are high-speed MOSFET drivers capable of providing 500 mA of peak current. The inverting or non-inverting single channel output is directly controlled from either TTL or CMOS (3V to 18V). These devices also feature low shoot-through current, matched rise/fall times and propagation delays which make them ideal for high switching frequency applications.
The MCP1401/02 devices operate from a single 4.5V to 18V power supply and can easily charge and discharge 470 pF gate capacitance in under 19 ns(typical). They provide low enough impedances in both the On and Off states to ensure the MOSFET’s intended state will not be affected, even by large transients.
These devices are highly latch-up resistant under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (of either polarity) occurs on the Ground pin. They can accept, without damage or logic upset, up to 500 mA of reverse current being forced back into their outputs. All terminals are fully protected against Electrostatic Discharge (ESD) up to 1 kV (HBM) and 300V (MM).
Feature
- Space-saving 5-Lead SOT-23 Package
- Wide Input Supply Operating Voltage Range: 4.5 V to 18V
- Low Shoot-Through/Cross-Conduction Current in Output Stage
- High Capacitive Load Drive Capability:
- 470 pF in 19 ns (Typical)
- 1000 pF in 34 ns (Typical)
- Matched, Short 35 ns Delay Times (Typical)
- Matched, Fast Rise and Fall Times (Under 20 ns, Typical)
- Low Output Impedance: Less Than 12 ohms (Typical)
- Low Supply Current Consumption:
- 850 µA (Typical) with 3 V Logic Input
- 100 µA (Typical) with 0 V Logic Input
- Robust Design:
- Latch-Up Protected, Can Withstand Up to 500mA Reverse Current
- Logic Input Will Withstand Up to 5V Negative Swings
- ESD Protected
Technical Parameters
- Product
- MOSFET Gate Drivers
- Configuration
- Non-Inverting
- Number of Drivers
- 1
- Rise Time
- 19 ns
- Fall Time
- 15 ns
- Output Current
- 0.5 A
- Supply Voltage Max
- 18 V
- Supply Voltage Min
- 4.5 V
- Supply Current
- 0.2 mA
- Maximum Power Dissipation
- 390 mW
- Maximum Operating Temperature
- + 125 C
- Mounting Style
- SMD/SMT
- Package / Case
- SOT-23-5
- Type
- Non-Inverting
- Minimum Operating Temperature
- - 40 C
- Number of Outputs
- 1
- Operating Supply Voltage
- 4.5 V to 18 V
- Packaging
- Reel
- Factory Pack Quantity
- 3000
MCP1402T-E/OT Datasheet
-
MCP1402 Technical Documentation of Application Note
MCP1402T-E/OT Related Products
Ratings and Reviews
- 0 / 5
- 5 Stars 0%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
- Payment:
- Shipping:
Shipping & Payment
Shipping
- Shipping Type
- Ship Fee
- Lead Time
- DHL
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- Fedex
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- UPS
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- TNT
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- EMS
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time：Shipping fee depend on different zone and country.
Payment
- Terms of payment
- Hand Fee
- Wire Transfer
- charge US$30.00 banking fee.
- Paypal
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from US$2.00.
-
90 days quality guarantee for all products.
Packing
-
Step1: Products
-
Step2: Vacuum Packaging
-
Step3: Anti-Static Bag
-
Step4: Individual Packaging
-
Step5: Packaging Boxes
-
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
FAQ:
- Q: How does Jotrin guarantee that MCP1402T-E/OT is the original manufacturer or agent of MICROCHIP?
- We have a professional business development department to strictly test and verify the qualifications of MICROCHIP original manufacturers and agents. All MICROCHIP suppliers must pass the qualification review before they can publish their MCP1402T-E/OT devices; we pay more attention to the channels and quality of MCP1402T-E/OT products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of MCP1402T-E/OT chips? Including MICROCHIP original factory information, Power Driver ICs application, MCP1402T-E/OT pictures?
- You can use Jotrin's intelligent search engine, or filter by Power MOSFET Drivers- Low Side Products category, or find it through Microchip Technology, Inc Information page.
- Q: Are the MICROCHIP's MCP1402T-E/OT price and stock displayed on the platform accurate?
- The MICROCHIP's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for MCP1402T-E/OT, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
-
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online. - Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
-
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days. - Q: What is the process for returns or replacement of MCP1402T-E/OT?
-
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the MCP1402TEOT we delivered, we will accept the replacement or return of the MCP1402T-E/OT only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of MCP1402T-E/OT.
(3)The MCP1402T-E/OT is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy. - Q: How to contact us and get support, such as MCP1402T-E/OT datasheet pdf, MCP1402 pin diagram?
- Need any After-Sales service, please feel free contact us: sales@jotrin.com
Microchip Technology, Inc
- 1.ATtiny85 Pinout, Datesheet, and Programming
- 2.What is Amplifier Inputs?
- 3.Types of SMD Components: Package Types, Size, and Function
- 4.EMC Design Techniques
- 5.What is a Microcontroller (MCU)?
- 6.What is SLAM technology?
-
MCP130T-450I/TT Supervisor w/5K Pull-Up Active Low, -40C to +85C, 3-SOT-23, T/R,Superv... -
MCP130T-475I/TT Supervisor w/5K Pull-Up Active Low, -40C to +85C, 3-SOT-23, T/R,Superv... -
MCP1316MT-29KE/OT Processor Supervisor 2.9V 1 Active Low/Open Drain Automotive 5-Pin SOT... -
MCP1316MT-29LE/OT Processor Supervisor 2.9V 1 Active Low/Open Drain Automotive 5-Pin SOT...
-
MCP1316T-29LE/OT Processor Supervisor 2.9V 1 Active Low/Push-Pull Automotive 5-Pin SOT-... -
MCP1318T-29LE/OT Processor Supervisor 2.9V 1 Active High/Active Low/Push-Pull Automotiv...
Certificates & Honor
