Products > Integrated Circuits (ICs) > Interface ICs > MAX22502EATC+
  • MAX22502EATC+
MAXIM

Images are for reference only.

MAX22502EATC+

Hot Sale

RS422/RS485 Transceiver, 1 Driver, 1 Receiver, 3V to 5.5V Supply, TDFN-12

  • Package/Case :
  • 12-WFDFN
  • Product Categories :
  • Drivers, Receivers, Transceivers
  • RoHs Status:
  • Lead free / RoHS Compliant
  • In-stock:
  • 2699

Quantity  

Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.


MAX22502EATC+ Product Details

The MAX22502EATC+ full-duplex, ESD-protected, RS-485/RS-422 transceiver is optimized for high-speed (up to 100Mbps) communication over long cables.This transceiver features larger receiver hysteresis for high noise rejection and improved signal integrity. Integrated preemphasis circuitry extends the distance, and increases the data rate, of reliable communication by reducing inter-symbol interference (ISI) caused by long cables when supplied with 5V. Integrated hot-swap protection and a fail-safe receiver ensure a logic-high on the receiver output when input signals are shorted or open for longer than 10μs (typ).

The MAX22502EATC+ is available in a 12-pin TDFN-EP (3mm x 3mm) package and operates over the -40°C to +125°C ambient temperature range.

Design Solution: RS-485: Overcome the Speed vs. Distance Challenge

Feature

  • High-Speed Operation Over Long Distances
    • Up to 100Mbps Data Rate
    • Integrated Preemphasis Extends Cable Length
    • High Receiver Sensitivity
    • Wide Receiver Bandwidth
    • Symmetrical Receiver Thresholds
  • Integrated Protection Increases Robustness
    • -15V to +15V Common Mode Range
    • ±15kV ESD Protection (Human Body Model)
    • ±7kV IEC61000-4-2 Air-Gap ESD Protection
    • ±6kV IEC61000-4-2 Contact Discharge ESD Protection
    • Driver Outputs are Short-Circuit Protected
  • Flexibility for Many Different Applications
    • 3V to 5.5V Supply Range
    • Low Voltage Logic Supply Down to 1.6V
    • Low 5μA (max) Shutdown Current
    • Available in 12-pin TDFN (3mm x 3mm) Package
    • -40°C to +125°C Operating Temperature Range

Applications

  • Backplane Busses
  • Encoder Interfaces
  • Field Bus Networks
  • Industrial Control Systems
  • Motion Control

MAX22502EATC+ Block Diagram
(Picture: Diagram)

Technical Parameters

  • Type
  • Transceiver
  • Protocol
  • RS422, RS485
  • Number of Drivers/Receivers
  • 1/1
  • Duplex
  • Full
  • Receiver Hysteresis
  • 250mV
  • Data Rate
  • 100Mbps
  • Voltage Supply
  • 3V ~ 5.5V
  • Operating Temperature
  • -40??C ~ 125??C
  • Mounting Type
  • Surface Mount
  • Package / Case
  • 12-WFDFN Exposed Pad
  • Supplier Device Package
  • 12-TDFN-EP (3x3)

MAX22502EATC+ Documents

MAX22502EATC+ Related Products

Ratings and Reviews

  • 0 / 5
  • 5 Stars 0%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
Reviews
  • Ratings
  • Please rate the product!
Payment:
Payment
Shipping:
Shipping More
Estimated Delivery Time: Jul 11 - Jul 16 days (choose Expedited at checkout).

Shipping & Payment

Shipping

  • Shipping Type
  • Ship Fee
  • Lead Time
  • $20.00-$40.00 (0.50 KG)
  • 2-5 days
  • $20.00-$40.00 (0.50 KG)
  • 3-7 days
  • $20.00-$45.00 (0.50 KG)
  • 2-5 days
  • $25.00-$65.00 (0.50 KG)
  • 2-5 days
  • $25.00-$45.00 (0.50 KG)
  • 5-14 days
  • $2.00-$3.00 (0.10 KG)
  • 7-30 days

Processing Time:Shipping fee depend on different zone and country.


Payment

  • Terms of payment
  • Hand Fee
  • Payment Site
  • charge US$30.00 banking fee.
  • charge 4.0% service fee.
  • https://www.paypal.com/
  • charge 3.5% service fee.
  • charge US$0.00 banking fee.
  • https://www.westernunion.com/
  • charge US$0.00 banking fee.
  • http://global.moneygram.com/

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.

Packing

  • Step1:Product

    Step1: Products

  • Step2:Vacuum packaging

    Step2: Vacuum Packaging

  • Step3:Anti-static bag

    Step3: Anti-Static Bag

  • Step4:Individual packaging

    Step4: Individual Packaging

  • Step5:Packaging boxes

    Step5: Packaging Boxes

  • Step6:bar-code shipping tag

    Step6: Bar-Code Shipping Tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Jotrin ESD packing

Guarantees

1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.

FAQ:

Q: How does Jotrin guarantee that MAX22502EATC+ is the original manufacturer or agent of MAXIM?
We have a professional business development department to strictly test and verify the qualifications of MAXIM original manufacturers and agents. All MAXIM suppliers must pass the qualification review before they can publish their MAX22502EATC+ devices; we pay more attention to the channels and quality of MAX22502EATC+ products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
Q: How to find the detailed information of MAX22502EATC+ chips? Including MAXIM original factory information, Drivers, Receivers, Transceivers application, MAX22502EATC+ pictures?
You can use Jotrin's intelligent search engine, or filter by RS-485/RS-422 Line Driver/Receivers category, or find it through Maxim Integrated Information page.
Q: Are the MAXIM's MAX22502EATC+ price and stock displayed on the platform accurate?
The MAXIM's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for MAX22502EATC+, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
Q: What forms of payment can I use in Jotrin?
TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement of MAX22502EATC+?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the MAX22502EATC+ we delivered, we will accept the replacement or return of the MAX22502EATC+ only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of MAX22502EATC+.
(3)The MAX22502EATC+ is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
Q: How to contact us and get support, such as MAX22502EATC+ datasheet pdf, MAX22502E pin diagram?
Need any After-Sales service, please feel free contact us: sales@jotrin.com

Maxim Integrated

Maxim
Maxim Integrated Products is a global range of linearity, mixed-signal integrated circuits (IC) design, R & D and manufacturing leader, has designed, developed, and manufactured analog, mixed-signal, high-frequency, and digital circuits that enable all four of these key interactions....
  • DS28E38Q+U
    DS28E38Q+U IC SECR ECDSA AUTHEN CHIPDNA PUF
  • ICE40UP5K-B-EVN
    ICE40UP5K-B-EVN Programmable Logic IC Development Tools ICE40 ULTRAPLUS BRD 48QFN I/O ...
  • IS21ES08G-JCLI
    IS21ES08G-JCLI Managed NAND Flash Serial e-MMC 3.3V 64G-bit 64G/16G/8G x 1/4-bit/8-bi...
  • ISM330DLCTR
    ISM330DLCTR IMUs - Inertial Measurement Units iNEMO inertial module: 3D accelerome...
  • SLTB004A
    SLTB004A Bluetooth/802.15.1 Development Tools Thunderboard Sense 2 dbqdrssc
  • A1006TL/TA1NXZ
    A1006TL/TA1NXZ Security ICs / Authentication ICs Secure Authenticator

Certificates & Honor

Certificates & Honor