Conv DC-DC 3V to 42V Synchronous Step Down Single-Out 0.8V to 41.5V 3A Automotive 10-Pin MSOP EP Tube
Request for Quotation
LT8609AEMSE#PBF Product Details
The LT8609/LT8609A/LT8609B is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 1.7µA of nonswitching quiescent current. The LT8609/LT8609A/LT8609B can deliver 3A of continuous current. Burst Mode operation enables high efficiency down to very low output currents while keeping the output ripple below 10mVP-P. A SYNC pin allows synchronization to an external clock, or spread spectrum modulation for low EMI operation. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability. The EN/UV pin has an accurate 1V threshold and can be used to program VIN UVLO or to shut down the part. A capacitor on the TR/SS pin programs the output voltage ramp rate during start-up while the PG flag signals when VOUT is within ±8.5% of the programmed output voltage as well as fault conditions. The LT8609AEMSE#PBF has slower switch edges for lower EMI emissions. The LT8609B APPLICATIONS operates in pulse-skipping mode only.Pulse-Skipping Mode, Burst Mode OperationSwitch Edge SpeedLT8609BothFastLT8609ABothMediumLT8609BPulse-SkippingFast
- Wide Input Voltage Range: 3.0V to 42V
- Ultralow Quiescent Current Burst Mode® Operation:
- <2.5µA IQ Regulating 12VIN to 3.3VOUT
- Output Ripple <10mVP-P
- High Efficiency 2MHz Synchronous Operation:
- >93% Efficiency at 1A, 5VOUT from 12VIN
- 3A Maximum Continuous Output
- Fast Minimum Switch-On Time: 45ns
- Adjustable and Synchronizable: 200kHz to 2.2MHz
- Spread Spectrum Frequency Modulation for Low EMI
- Allows Use of Small Inductors
- Low Dropout
- Peak Current Mode Operation
- Accurate 1V Enable Pin Threshold
- Internal Compensation
- Output Soft-Start and Tracking
- Small 10-Lead or 16-Lead MSOP Package
- GSM Transceivers
- General Purpose Step Down
- Low EMI Step Down
- Output Configuration
- Output Type
- Number of Outputs
- Voltage Input (Min)
- Voltage Input (Max)
- Voltage Output (Min/Fixed)
- Voltage Output (Max)
- Current Output
- Frequency Switching
- 200kHz ~ 2.2MHz
- Synchronous Rectifier
- Operating Temperature
- -40??C ~ 125??C (TJ)
- Mounting Type
- Surface Mount
- Package / Case
- 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad
- Supplier Device Package
LT8609A Technical Documentation/Data sheet
LT8609AEMSE#PBF Related Products
Ratings and Reviews (1)
- 5 / 5
- 5 Stars 100%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
Schnell geliefert! Alles bestens
Estimated Delivery Time: Aug 09 - Aug 14 days (choose Expedited at checkout).
Shipping & Payment
- Shipping Type
- Ship Fee
- Lead Time
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time：Shipping fee depend on different zone and country.
- Terms of payment
- Hand Fee
- Wire Transfer
- charge US$30.00 banking fee.
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step2: Vacuum Packaging
Step3: Anti-Static Bag
Step4: Individual Packaging
Step5: Packaging Boxes
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: How does Jotrin guarantee that LT8609AEMSE#PBF is the original manufacturer or agent of LINEAR?
- We have a professional business development department to strictly test and verify the qualifications of LINEAR original manufacturers and agents. All LINEAR suppliers must pass the qualification review before they can publish their LT8609AEMSE#PBF devices; we pay more attention to the channels and quality of LT8609AEMSE#PBF products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of LT8609AEMSE#PBF chips? Including LINEAR original factory information, 8 Bit Microcontroller application, LT8609AEMSE#PBF pictures?
- You can use Jotrin's intelligent search engine, or filter by Step-Down (Buck) Regulators ; Micropower Buck Regulators category, or find it through Linear Technology Corp. (ADI) Information page.
- Q: Are the LINEAR's LT8609AEMSE#PBF price and stock displayed on the platform accurate?
- The LINEAR's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for LT8609AEMSE#PBF, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement of LT8609AEMSE#PBF?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the LT8609AEMSE#PBF we delivered, we will accept the replacement or return of the LT8609AEMSE#PBF only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of LT8609AEMSE#PBF.
(3)The LT8609AEMSE#PBF is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
- Q: How to contact us and get support, such as LT8609AEMSE#PBF datasheet pdf, LT8609A pin diagram?
- Need any After-Sales service, please feel free contact us: firstname.lastname@example.org
Linear Technology Corp. (ADI)
- 1.Buck-boost charge pump offered in MP-grade temperature range
- 2.Robust 140V VIN, 400mA Step-Down Regulator for Industrial, Telecom and Automotive Environments
- 3. Analog Devices new product_the AD9173
- 4.Linear Technology's latest products DC2257A
- 5.DC/DC controller drives over 250W of LED power
- 6.Multicell battery gas gauge makes direct measurements of 3.6V to 20V battery stacks