Products > Integrated Circuits (ICs) > Amplifier ICs > LT6013AIS8#PBF
LT6013AIS8#PBF 8-SOIC (0.154, 3.90mm Width)
  • LT6013AIS8#PBF
  • LT6013AIS8#PBF 0
  • LT6013AIS8#PBF 1
  • LT6013AIS8#PBF 2
  • LT6013AIS8#PBF 3
  • LT6013AIS8#PBF 4
  • LT6013AIS8#PBF 5
Images are for reference only.


OP Amp Single GP R-R O/P ±18V/36V 8Pin SOIC N

Manufacturer :
Analog Devices, Inc
Package/Case :
8-SOIC (0.154, 3.90mm Width)
Product Categories :
RoHs Status:

Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.

LT6013AIS8#PBF Product Details

The LT6013AIS8#PBF and LT6014 op amps combine low noise and high precision input performance with low power consumption and rail-to-rail output swing. The amplifiers are stable in a gain of 5 or more and feature greatly improved CMRR and PSRR versus frequency compared to other precision op amps.

Input offset voltage is factory-trimmed to less than 35µV. The low drift and excellent long-term stability ensure a high accuracy over temperature and time. The 250pA maximum input bias current and 120dB minimum voltage gain further maintain this precision over operating conditions.

The LT6013AIS8#PBF and LT6014 operate from any supply voltage from 2.7V to 36V and draw only 145µA of supply current per amplifier on a 5V supply. The output swings to within 40mV of either supply rail, making the amplifiers very useful for low voltage single supply operation.

The amplifiers are fully specified at 5V and ±15V supplies and from -40°C to 85°C. The single LT6013AIS8#PBF and dual LT6014 are both available in SO-8 and space saving 3mm × 3mm DFN packages. For unity gain stable versions, refer to the LT6010 and LT6011 data sheets.


  • 35µV Maximum Offset Voltage (LT6013A)
  • Low 1/f Noise:
    • 200nVP-P (0.1Hz to 10Hz)
    • 40nVRMS (0.1Hz to 10Hz)
  • Low White Noise: 9.5nV/√Hz (1kHz)
  • Rail-to-Rail Output Swing
  • 145µA Supply Current per Amplifier
  • 250pA Maximum Input Bias Current (LT6013A)
  • AV ≥ 5 Stable; Up to 500pF CLOAD
  • 0.2V/µs Slew Rate
  • 1.4MHz Gain Bandwidth Product
  • 120dB Minimum Voltage Gain, VS = ±15V
  • 0.8µV/°C Maximum VOS Drift
  • 2.7V to ±18V Supply Voltage Operation
  • Operating Temperature Range: -40°C to 85°C
  • Available in SO-8 and Space Saving 3mm × 3mm DFN Packages


  • Thermocouple Amplifiers
  • Precision Photodiode Amplifiers
  • Instrumentation Amplifiers
  • Battery-Powered Precision Systems
  • Low-Voltage Precision Systems
  • Micro-Power Sensor Interface

LT6013AIS8#PBF Pinout
(Picture: Pinout)

LT6013AIS8#PBF Block Diagram
(Picture: Diagram)

Technical Parameters

Number of Circuits 1 Case/Package SO
Slew Rate 200 mV/μs RoHS Compliant
Product Lifecycle Status Transferred Lead Free Status Lead Free
Number of Pins 8

LT6013AIS8#PBF Documents

  • LT6013 Technical Documentation/Data sheet

LT6013AIS8#PBF Related Products

Ratings and Reviews (0)

  • 0 / 5
  • 5 Stars 0%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
  • Ratings
  • Please rate the product!
Shipping More
Estimated Delivery Time: Sep 24 - Sep 29 days (choose Expedited at checkout).

Shipping & Payment


Shipping Type Ship Fee Lead Time

$20.00-$40.00 (0.50 KG)

2-5 days

$20.00-$40.00 (0.50 KG)

3-7 days

$20.00-$45.00 (0.50 KG)

2-5 days

$25.00-$65.00 (0.50 KG)

2-5 days

$25.00-$45.00 (0.50 KG)

5-14 days

$2.00-$3.00 (0.10 KG)

7-30 days

Processing Time:Shipping fee depend on different zone and country.


Terms of payment Hand Fee Payment Site
Wire Transfer

charge US$30.00 banking fee.


charge 4.0% service fee.
Credit Card

charge 3.5% service fee.

Western Union

charge US$0.00 banking fee.
Money Gram

charge US$0.00 banking fee.

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.


  • Step1:Product


  • Step2:Vacuum packaging

    Step2:Vacuum packaging

  • Step3:Anti-static bag

    Step3:Anti-static bag

  • Step4:Individual packaging

    Step4:Individual packaging

  • Step5:Packaging boxes

    Step5:Packaging boxes

  • Step6:bar-code shipping tag

    Step6:bar-code shipping tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.


1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.


Q: What are the advantages of buying from Jotrin?
Jotrin is your second procurement department of the electronic components. The platform has supported by over 1000 original factories and authorized agents, over 10 years of experience in the electronic components area. Jotrin is aiming to help these manufacturers, EMS, PCBA clients offer a whole BOM solution with the assistant of their professional BOM team and Intelligent BOM software. We can help you:
1. Do the cost down for your current regular orders.
2. Decrease your suppliers' management costs and suppliers' qty.
3. Improve your efficiency, we can offer the whole BOM one-stop supply chain service.
Q: How can Jotrin guarantee to be the original manufacturers or the agents?
We have a professional business development department to strictly examine and verify the qualifications of the original manufacturers and the agents. All the suppliers must pass the qualification examination before putting their materials on the shelves; We pay more attention to the channel and quality of products than any other customers, we are strict with supplier audit, you can rest assured that choice.
Q: What are the business hours of Jotrin?
Although we accept quotation requests and orders anytime 24 hours a day regardless of business days and hours, we provide quotations and process orders during business time.
Business Hours: Monday - Friday 9:00am - 9:00pm (GMT+8)
Q: Is the inventory and price seen on the platform accurate?
Inventory fluidity big, unable to update in time, it will be updated periodically within 24 hours. After placing the order, it is suggested to confirm the order with the supplier or the online customer service of Jotrin before paying.
Q: Can I place an order offline?
Yes. We accept offline orders.
You can contact our customer service representatives to help you customize your requirements.
If you'd like to submit your purchase orders via email, please send us a note to One of our customer service representatives will help you.
Q: What forms of payment can I use in Jotrin?
TT Bank, Western Union, Paypal, and Escrow is all acceptable.
Q: How is the shipping arranged?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail. No shipment handling charges be included.
Q: How can I track my package?
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status of your order and its tracking number, if applicable. When the tracking numbers are present, you can click on the link and it will take you directly to the carriers' website so that you can track your order. Note: It may take up to 24 hours before carriers will display tracking information.
Q: When can I receive my package?
In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the product we delivered, we will accept the replacement or return of the product only when all of the below conditions are fulfilled: (1)There are any problems with the product we delivered, such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of the product.
(3)The product is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy
Q: How to contact us and get support?
Need any After-Sales service, please feel free contact us:


Analog Devices, Inc. was founded by two MIT graduates, Ray Stata and Matthew Lorber in 1965. The same year, the company released its first product, the model 101 op amp, which was a hockey-puck sized...
  • IT38140
    IT38140 IDEAL-TEK IT38140 Swab, Polyester, Polypropylene Handle, 3mm x 690mm, Pack of 125
    LC87F7NC8AVUEJ-2H Terminal Block; Fuse; 1; 2; 26-8; 600; 25A; 6kV; M4; 1.2Nm; Glass; PA; 12mm
  • SI5348A-B-GM
    SI5348A-B-GM Clock Generator 0.008MHz to 750MHz Input 712.5MHz Output 64Pin QFN EP
  • HIH8130-000-001
    HIH8130-000-001 Board Mount Humidity Sensors SOIC 8SMD w/o filter Non-condensing
  • HIH8130-021-001
    HIH8130-021-001 Board Mount Humidity Sensors SOIC 8SMD w/o filter Non-condensing
  • LPC1827JET100E
    LPC1827JET100E MCU 32Bit ARM Cortex M3 RISC 1Mb Flash 3.3V 100Pin TFBGA Tray

Certificates & Honor

Certificates & Honor