Products > Integrated Circuits (ICs) > Comparator ICs > LT1711IMS8#PBF

Images are for reference only.


Hot Sale

Analogue Comparator, Rail to Rail, High Speed, 1 Comparator, 4.5 ns, 2.4V to 12V, MSOP, 8 Pins

Manufacturer : Analog Devices, Inc
Package/Case : MSOP-8
Product Categories : Comparators
Datasheet: LT1711IMS8#PBF Datasheet (PDF)
RoHs Status: Pb-free Halide free
In-stock: 320


Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.

LT1711IMS8#PBF Product Details

The LT1711IMS8#PBF is a 4.5ns Rail-to-rail Comparator featuring rail-to-rail inputs, rail-to-rail complementary outputs and an output latch. Optimized for 3 and 5V power supplies, it operates over a single supply voltage range from 2.4 to 12V or from ±2.4 to ±6V dual supplies. In addition to the wide supply voltage flexibility, rail-to-rail input common mode range extends 100mV beyond both supply rails and the outputs are protected against phase reversal for inputs extending further beyond the rails. The rail-to-rail inputs may be taken to opposite rails with no significant increase in input current. The rail-to-rail matched complementary outputs interface directly to TTL or CMOS logic and can sink 10mA to within 0.5V of GND or source 10mA to within 0.7V of V+. It has an internal TTL/CMOS compatible latch for retaining data at the outputs. The latch holds data as long as the latch pin is held high. Latch pin hysteresis provides protection against slow moving or noisy latch signals.


  • Ultrafast (4.5ns at 20mV overdrive, 5.5ns at 5mV overdrive)
  • Rail-to-rail inputs
  • Rail-to-rail complementary outputs (TTL/CMOS compatible)
  • Specified at 2.7, 5 and ±5V supplies
  • Output latch capability
  • Input can exceed supplies without phase reversal


Test & Measurement, Signal Processing, Sensing & Instrumentation

LT1711IMS8#PBF Pinout
(Picture: Pinout)

LT1711IMS8#PBF Block Diagram
(Picture: Diagram)

Technical Parameters

  • Type
  • with Latch
  • Number of Elements
  • 1
  • Output Type
  • CMOS, Complementary, Rail-to-Rail, TTL
  • Voltage Supply, Single/Dual (??)
  • 2.4V ~ 12V, ??2.4V ~ 6V
  • Voltage Input Offset (Max)
  • 5mV @ 5V
  • Current Input Bias (Max)
  • 5??A @ 5V
  • Current Output (Typ)
  • 20mA
  • Current Quiescent (Max)
  • 22mA
  • CMRR, PSRR (Typ)
  • 75dB CMRR, 85dB PSRR
  • Propagation Delay (Max)
  • 6ns
  • Operating Temperature
  • -40??C ~ 85??C
  • Package / Case
  • 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Mounting Type
  • Surface Mount
  • Supplier Device Package
  • 8-MSOP

LT1711IMS8#PBF Datasheet

  • LT1711 Technical Documentation/Data sheet

LT1711IMS8#PBF Related Products

Ratings and Reviews

  • 0 / 5
  • 5 Stars 0%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
  • Ratings
  • Please rate the product!
Shipping More
Estimated Delivery Time: Jun 28 - Jul 03 days (choose Expedited at checkout).

Shipping & Payment


  • Shipping Type
  • Ship Fee
  • Lead Time
  • $20.00-$40.00 (0.50 KG)
  • 2-5 days
  • $20.00-$40.00 (0.50 KG)
  • 3-7 days
  • $20.00-$45.00 (0.50 KG)
  • 2-5 days
  • $25.00-$65.00 (0.50 KG)
  • 2-5 days
  • $25.00-$45.00 (0.50 KG)
  • 5-14 days
  • $2.00-$3.00 (0.10 KG)
  • 7-30 days

Processing Time:Shipping fee depend on different zone and country.


  • Terms of payment
  • Hand Fee
  • Payment Site
  • charge US$30.00 banking fee.
  • charge 4.0% service fee.
  • charge 3.5% service fee.
  • charge US$0.00 banking fee.
  • charge US$0.00 banking fee.

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.


  • Step1:Product

    Step1: Products

  • Step2:Vacuum packaging

    Step2: Vacuum Packaging

  • Step3:Anti-static bag

    Step3: Anti-Static Bag

  • Step4:Individual packaging

    Step4: Individual Packaging

  • Step5:Packaging boxes

    Step5: Packaging Boxes

  • Step6:bar-code shipping tag

    Step6: Bar-Code Shipping Tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Jotrin ESD packing


1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.


Q: How does Jotrin guarantee that LT1711IMS8#PBF is the original manufacturer or agent of ADI?
We have a professional business development department to strictly test and verify the qualifications of ADI original manufacturers and agents. All ADI suppliers must pass the qualification review before they can publish their LT1711IMS8#PBF devices; we pay more attention to the channels and quality of LT1711IMS8#PBF products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
Q: How to find the detailed information of LT1711IMS8#PBF chips? Including ADI original factory information, Comparators application, LT1711IMS8#PBF pictures?
You can use Jotrin's intelligent search engine, or filter by Comparators ; High Speed Comparators (<100ns Propagation Delay) category, or find it through Analog Devices, Inc Information page.
Q: Are the ADI's LT1711IMS8#PBF price and stock displayed on the platform accurate?
The ADI's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for LT1711IMS8#PBF, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
Q: What forms of payment can I use in Jotrin?
TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement of LT1711IMS8#PBF?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the LT1711IMS8#PBF we delivered, we will accept the replacement or return of the LT1711IMS8#PBF only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of LT1711IMS8#PBF.
(3)The LT1711IMS8#PBF is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
Q: How to contact us and get support, such as LT1711IMS8#PBF datasheet pdf, LT1711 pin diagram?
Need any After-Sales service, please feel free contact us:

Analog Devices, Inc

Analog Devices, Inc. was founded by two MIT graduates, Ray Stata and Matthew Lorber in 1965. The same year, the company released its first product, the model 101 op amp, which was a hockey-puck sized module used in test and measurement equipment. In 1967, the company published the first issue of its...
  • LT1677IS8
    LT1677IS8 Pressure Transducer, Series 19 mm, Compensated, Pressure Range: 0 psi ...
  • LT1677IS8#PBF
    LT1677IS8#PBF LINEAR TECHNOLOGY LT1677IS8#PBF Operational Amplifier, Single, 1 Ampli...
  • LT1678CS8
    LT1678CS8 Precision Amplifiers LT1678 - Dual/Quad Low Noise, Rail-to-Rail, Preci...
  • LT1678CS8#PBF
    LT1678CS8#PBF Operational Amplifier, Dual, 2 Amplifier, 20 MHz, 6 V/µs, 2.7V to 36V,...
  • LT1678IS8#PBF
    LT1678IS8#PBF RISC Microcontroller, 8Bit, FLASH, AVR RISC CPU, 16MHz, CMOS, PQFP32, ...
  • LT1679CS#PBF
    LT1679CS#PBF Operational Amplifier, Quad, 4 Amplifier, 20 MHz, 6 V/µs, 2.7V to 36V,...

Certificates & Honor

Certificates & Honor