Products > Resistors > LT1281ACN
ADI

Images are for reference only.

LT1281ACN

Hot Sale

8-Bit Identity Comparators (P=Q) w/ Enable, Open Collector Outputs, 20K Ohm Q-Input Pullup Resistor 20-PDIP 0 to 70

Manufacturer : Analog Devices, Inc
Package/Case : DIP16
Product Categories : Comply with RS232, 422,485,644, X21, V35 standard devices
Datasheet: LT1281ACN Datasheet (PDF)
RoHs Status: Lead free/RoHS Compliant
In-stock: 110

Quantity  

Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.


LT1281ACN Product Details

The LT1280A/LT1281ACN are dual RS232 driver/receiver pairs with integral charge pump to generate RS232 voltage levels from a single 5V supply. These circuits feature rugged bipolar design to provide operating fault tolerance and ESD protection unmatched by competing CMOS designs. Using only 0.1µF external capacitors, these circuits consume only 40mW of power, and can operate to 120kbaud even while driving heavy capacitive loads. New ESD structures on the chip allow the LT1280A/LT1281ACN to survive multiple ±10kV strikes, eliminating the need for costly TransZorbs® on the RS232 line pins. The LT1280A/LT1281ACN are fully compliant with EIA RS232 standards. Driver outputs are protected from overload, and can be shorted to ground or up to ±30V without damage. During shutdown or power-off conditions, driver and receiver outputs are in a high impedance state, allowing line sharing.

The LT1281ACN is available in 16-pin DIP and SO packages. The LT1280A is supplied in 18-pin DIP and SO packages for applications which require shutdown.

Feature

  • 10mA Max Supply Current
  • ESD Protection over ±10kV
  • Uses Small Capacitors: 0.1µF
  • 120kBaud Operation for RL = 3k, CL = 2500pF
  • 250kBaud Operation for RL = 3k, CL = 1000pF
  • Outputs Withstand ±30V Without Damage
  • CMOS Comparable Low Power: 40mW
  • Operates from a Single 5V Supply
  • Rugged Bipolar Design
  • Outputs Assume a High Impedance State When Off or Powered Down
  • Meets All RS232 Specifications
  • Available With or Without Shutdown
  • Absolutely No Latch-up
  • Available in SO Package

Applications

  • Portable Computers
  • Battery-Powered Systems
  • Power Supply Generator
  • Terminals
  • Modems

LT1281ACN Block Diagram
(Picture: Diagram)

Technical Parameters

  • Interface Protocol
  • RS-232
  • Data Ratemax | bps
  • 250k
  • Number Tx
  • 2
  • Number Rx
  • 2
  • Rx Active in Shutdown
  • -
  • ESD ProtectionV
  • 10k
  • Vs+min | V
  • 5
  • Vs+max | V
  • 5.5

LT1281ACN Datasheet

  • LT1281A Technical Documentation/Data sheet

LT1281ACN Related Products

Ratings and Reviews

  • 0 / 5
  • 5 Stars 0%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
Reviews
  • Ratings
  • Please rate the product!
Payment:
Payment
Shipping:
Shipping More
Estimated Delivery Time: Feb 12 - Feb 17 days (choose Expedited at checkout).

Shipping & Payment

Shipping

  • Shipping Type
  • Ship Fee
  • Lead Time
  • $20.00-$40.00 (0.50 KG)
  • 2-5 days
  • $20.00-$40.00 (0.50 KG)
  • 3-7 days
  • $20.00-$45.00 (0.50 KG)
  • 2-5 days
  • $25.00-$65.00 (0.50 KG)
  • 2-5 days
  • $25.00-$45.00 (0.50 KG)
  • 5-14 days
  • $2.00-$3.00 (0.10 KG)
  • 7-30 days

Processing Time:Shipping fee depend on different zone and country.


Payment

  • Terms of payment
  • Hand Fee
  • Payment Site
  • charge US$30.00 banking fee.
  • charge 4.0% service fee.
  • https://www.paypal.com/
  • charge 3.5% service fee.
  • charge US$0.00 banking fee.
  • https://www.westernunion.com/
  • charge US$0.00 banking fee.
  • http://global.moneygram.com/

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.

Packing

  • Step1:Product

    Step1: Products

  • Step2:Vacuum packaging

    Step2: Vacuum Packaging

  • Step3:Anti-static bag

    Step3: Anti-Static Bag

  • Step4:Individual packaging

    Step4: Individual Packaging

  • Step5:Packaging boxes

    Step5: Packaging Boxes

  • Step6:bar-code shipping tag

    Step6: Bar-Code Shipping Tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Jotrin ESD packing

Guarantees

1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.

FAQ:

Q: How does Jotrin guarantee that LT1281ACN is the original manufacturer or agent of ADI?
We have a professional business development department to strictly test and verify the qualifications of ADI original manufacturers and agents. All ADI suppliers must pass the qualification review before they can publish their LT1281ACN devices; we pay more attention to the channels and quality of LT1281ACN products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
Q: How to find the detailed information of LT1281ACN chips? Including ADI original factory information, Comply with RS232, 422,485,644, X21, V35 standard devices application, LT1281ACN pictures?
You can use Jotrin's intelligent search engine, or filter by RS-232 / RS-422 / RS-485 / RS-562 ; RS-232 & RS-562 category, or find it through Analog Devices, Inc Information page.
Q: Are the ADI's LT1281ACN price and stock displayed on the platform accurate?
The ADI's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for LT1281ACN, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
Q: What forms of payment can I use in Jotrin?
TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement of LT1281ACN?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the LT1281ACN we delivered, we will accept the replacement or return of the LT1281ACN only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of LT1281ACN.
(3)The LT1281ACN is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
Q: How to contact us and get support, such as LT1281ACN datasheet pdf, LT1281A pin diagram?
Need any After-Sales service, please feel free contact us: sales@jotrin.com

Analog Devices, Inc

ADI
Analog Devices, Inc. was founded by two MIT graduates, Ray Stata and Matthew Lorber in 1965. The same year, the company released its first product, the model 101 op amp, which was a hockey-puck sized module used in test and measurement equipment. In 1967, the company published the first issue of its...
  • LT1167CN8
    LT1167CN8 LT1167 - Single Resistor Gain Programmable, Precision Instrumentation ...
  • LFVLT60-1001
    LFVLT60-1001 1775880 Series Nut For Use With Flush Type Connector, Securing Sunclix...
  • LR0204F1K0
    LR0204F1K0 RES, METAL FILM, 1K, 1%, 200V, AXIAL, Resistance:1kohm, Voltage Rating...
  • LRF2512-R015FW
    LRF2512-R015FW RESISTOR, 2512 0R015; Series:LR; Resistance:0.015R; Tolerance, resista...
  • LRC-LRF2512LF-01-R010-F
    LRC-LRF2512LF-01-R010-F Res Thick Film 2512 0.01Ω 1% 2W ±500ppm/℃ Pad SMD Automotive T/R
  • LR1F4K7
    LR1F4K7 LR Series 4.7 KOhms ?% 0.6 W 0603 SMT Thin Film Fixed Resistor

Certificates & Honor

Certificates & Honor