ALL CATEGORIES
Precision, Single Supply Op Amp
| Manufacturer : | Analog Devices, Inc |
|---|---|
| Package/Case : | DIP-8 |
| Product Categories : | Operational Amplifiers (Op Amps) ; Precision Op Amps (Vos ≤1mV & TCVos ≤2uV/C) |
| Datasheet: | LT1006AMJ8/883C Datasheet (PDF) |
| RoHs Status: | Lead free/RoHS Compliant |
| In-stock: | 90 |
Quantity
Request for Quotation
LT1006AMJ8/883C Product Details
The LT1006AMJ8/883C is the first precision single supply operational amplifier. Its design has been optimized for single supply operation with a full set of specifications at 5V. Specifications at ±15V are also provided.
The LT1006AMJ8/883C has a low offset voltage of 20µV, drift of 0.2µV/°C, offset current of 120pA, gain of 2.5 million, common mode rejection of 114dB and power supply rejection of 126dB.
Although supply current is only 340µA, a novel output stage can source or sink in excess of 20mA while retaining high voltage gain. Common mode input range includes ground to accommodate low ground-referenced inputs from strain gauges or thermocouples, and output can swing to within a few millivolts of ground. If a higher slew rate (in excess of 1V/µs) or micropower operation (supply current down to 90µA) is required, the operating currents can be modified by connecting an external optional resistor to Pin 8.
For similar single supply precision dual and quad op amps, please see the LT1013/LT1014 datasheet. For micropower dual and quad op amps, please see the LT1078/LT1079 data sheet.
Feature
- Single Supply Operation
- Input Voltage Range Extends to Ground
- Output Swings to Ground while Sinking Current
- Guaranteed Offset Voltage: 50µV Max
- Guaranteed Low Drift: 1.3µV/°C Max
- Guaranteed Offset Current: 0.5nA Max
- Guaranteed High Gain
- 5mA Load Current: 1.5 Million Min
- 17mA Load Current: 0.8 Million Min
- Guaranteed Low Supply Current: 520µA Max
- Supply Current can be Reduced by a Factor of 4
- Low Voltage Noise, 0.1Hz to 10Hz: 0.55µVP-P
- Low Current Noise—Better than OP-07: 0.07pA/√Hz at 10Hz
- High Input Impedance: 250MΩ Min
- Minimum Supply Voltage: 2.7V Min
Applications
- Low Power Sample and Hold Circuits
- Battery Powered Precision Instrumentation
- Strain Gauge Signal Conditioners
- Thermocouple Amplifiers
- 4mA to 20mA Current Loop Transmitters
- Active Filters
(Picture: Diagram)
Technical Parameters
- # of Amps
- 1
- Vosmax | V
- 50µ
- Vos TCtyp | V/°C
- 200n
- GBPtyp | Hz
- 600k
- Slew Ratetyp | V/us
- 400m
- VNoise Densitytyp | V/rtHz
- 22n
- 0.1 to 10 Hz VNoisetyp | V p p
- 550n
- Iq/Amptyp | A
- 340µ
- Vs spanmin | V
- 4
- Vs spanmax | V
- 44
LT1006AMJ8/883C Datasheet
-
LT1006 Technical Documentation/Data sheet
LT1006AMJ8/883C Related Products
Ratings and Reviews
- 0 / 5
- 5 Stars 0%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
- Payment:
- Shipping:
Shipping & Payment
Shipping
- Shipping Type
- Ship Fee
- Lead Time
- DHL
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- Fedex
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- UPS
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- TNT
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- EMS
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time：Shipping fee depend on different zone and country.
Payment
- Terms of payment
- Hand Fee
- Wire Transfer
- charge US$30.00 banking fee.
- Paypal
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from US$2.00.
-
90 days quality guarantee for all products.
Packing
-
Step1: Products
-
Step2: Vacuum Packaging
-
Step3: Anti-Static Bag
-
Step4: Individual Packaging
-
Step5: Packaging Boxes
-
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
FAQ:
- Q: How does Jotrin guarantee that LT1006AMJ8/883C is the original manufacturer or agent of ADI?
- We have a professional business development department to strictly test and verify the qualifications of ADI original manufacturers and agents. All ADI suppliers must pass the qualification review before they can publish their LT1006AMJ8/883C devices; we pay more attention to the channels and quality of LT1006AMJ8/883C products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of LT1006AMJ8/883C chips? Including ADI original factory information, Operational Amplifiers (Op Amps) ; Precision Op Amps (Vos ≤1mV & TCVos ≤2uV/C) application, LT1006AMJ8/883C pictures?
- You can use Jotrin's intelligent search engine, or filter by Operational Amplifiers (Op Amps) ; Precision Op Amps (Vos ≤1mV & TCVos ≤2uV/C) category, or find it through Analog Devices, Inc Information page.
- Q: Are the ADI's LT1006AMJ8/883C price and stock displayed on the platform accurate?
- The ADI's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for LT1006AMJ8/883C, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
-
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online. - Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
-
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days. - Q: What is the process for returns or replacement of LT1006AMJ8/883C?
-
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the LT1006AMJ8883C we delivered, we will accept the replacement or return of the LT1006AMJ8/883C only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of LT1006AMJ8/883C.
(3)The LT1006AMJ8/883C is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy. - Q: How to contact us and get support, such as LT1006AMJ8/883C datasheet pdf, LT1006 pin diagram?
- Need any After-Sales service, please feel free contact us: sales@jotrin.com
Analog Devices, Inc
- 1.EMI Reduction Through Spread Spectrum FM Technology
- 2.Analog Devices' electronic part number naming conventions
- 3.AD9833 chip realizes programmable telemetry signal source
- 4.Digital-to-Analog Converter supports smartphone testing.
- 5.D/A Converter optimizes television viewing experience.
- 6.Multicore Processors optimize audio system applications.
-
LT1001CS8#PBF LINEAR TECHNOLOGY LT1001CS8#PBF Operational Amplifier, Single, 1 Ampli... -
LT1002CN Male Cable Mount Solar Conn Plug; CableCSA2.5 to 6mm²; Rated At 40A; 1... -
LT1004CS8-1.2#PBF Voltage Reference, Micropower, Shunt - Fixed, LT1004 Series, 1.235V, N... -
LT1004CZ-1.2#PBF Voltage Reference, Micropower, Shunt - Fixed, LT1004 Series, 1.235V, T... -
LT1002CJ Dual, Matched Precision Operational Amplifier -
LT1001CN8 OP AMP, PRECISION, +/-14V, 0.8MHZ
Certificates & Honor
