MCU 16-bit/32-bit ARM926EJ-S RISC ROMLess 1.2V/1.8V/2.5V/3.3V 296-Pin TFBGA Tray
Request for Quotation
LPC3250FET296/01,5 Product Details
The LPC3250 operates at CPU frequencies of up to 266 MHz. The NXP® implementation uses an ARM926EJ-S CPU core with a Harvard architectur, 5-stage pipeline, and an integral Memory Management Unit.The LPC3250 also includes 256 kB of on-chip static RAM, a NAND flash interface, an Ethernet MAC, an LCD controller that supports STN and TFT panels, and an external bus interface that supports SDR and DDR SDRAM, as well as static devices. In addition, the LPC3250 includes a USB 2.0 full-speed interface, seven UARTs, two I2C-bus interfaces, two SPI/SSP ports, two I2S-bus interfaces, two single output PWMs, a motor control PWM, six general purpose timers with capture inputs and compare outputs, a Secure Digital interface, and a 10-bit Analog-to-Digital Converter with a touch screen sense option.
- ARM926EJS processor, running at CPU clock speeds up to 266 MHz
- Vector Floating Point (VFP) coprocessor
- 32 kB instruction cache and a 32 kB data cache
- Up to 256 kB of Internal SRAM (IRAM)
- Selectable boot-up from various external devices
- Multi-layer AHB system that provides a separate bus for each AHB master
- External memory controller for DDR and SDR SDRAM as well as for static devices
- Two NAND flash controllers
- Master Interrupt Controller (MIC) and two Slave Interrupt Controllers (SIC)
- Eight channel General Purpose DMA (GPDMA) controller on the AHB
- 10/100 Ethernet MAC with dedicated DMA Controller
- USB interface supporting either device, host (OHCI compliant), or On-The-Go
- Four standard UARTs with fractional baud rate generation
- Three additional high-speed UARTs intended for on-board communications
- Two SPI controllers
- Two SSP controllers
- Two I2C-bus interfaces with standard open-drain pins
- Two I2S-bus interfaces, each with separate input and output channels
- LCD controller supporting both STN and TFT panels
- Secure Digital (SD) memory card interface
- General Purpose (GP) input, output, and I/O pins
- 10 bit, 400 kHz Analog-to-Digital Converter (ADC)
- Real-Time Clock (RTC) with separate power pin and dedicated 32 kHz oscillator
- 32-bit general purpose high-speed timer with a 16-bit pre-scaler
- Six enhanced timer/counters
- 32-bit millisecond timer driven from the RTC clock
- WatchDog timer clocked by the peripheral clock
- Two single-output PWM blocks
- Motor control PWM
- Keyboard scanner function allows automatic scanning of an up to 8 x 8 key matrix
- Up to 18 external interrupts
- Standard Arm® test/debug interface for compatibility with existing tools
- Emulation Trace Buffer (ETB) with 2048 x 24 bit RAM allows trace via JTAG
- Stop mode saves power
- On-chip crystal oscillator
- An on-chip PLL allows CPU operation up to the maximum CPU rate
- Boundary scan for simplified board testing
- Network control
- Data Bus Width
- 16 bit/32 bit
- Maximum Clock Frequency
- 266 MHz
- Data RAM Size
- 256 KB
- On Chip ADC
- Operating Supply Voltage
- 1.31 V to 1.39 V
- Maximum Operating Temperature
- + 85 C
- Package / Case
- Mounting Style
- A/D Bit Size
- 10 bit
- A/D Channels Available
- Interface Type
- Minimum Operating Temperature
- - 40 C
- Number of Timers
- Processor Series
- Factory Pack Quantity
LPC3250FET296 NXP Technical Data
LPC3250FET296/01,5 Related Products
Ratings and Reviews (1)
- 5 / 5
- 5 Stars 100%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
Fabulous service!!! Great price! No worries! 😍 😎
Estimated Delivery Time: Aug 21 - Aug 26 days (choose Expedited at checkout).
Shipping & Payment
- Shipping Type
- Ship Fee
- Lead Time
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time：Shipping fee depend on different zone and country.
- Terms of payment
- Hand Fee
- Wire Transfer
- charge US$30.00 banking fee.
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step2: Vacuum Packaging
Step3: Anti-Static Bag
Step4: Individual Packaging
Step5: Packaging Boxes
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: How does Jotrin guarantee that LPC3250FET296/01,5 is the original manufacturer or agent of NXP?
- We have a professional business development department to strictly test and verify the qualifications of NXP original manufacturers and agents. All NXP suppliers must pass the qualification review before they can publish their LPC3250FET296/01,5 devices; we pay more attention to the channels and quality of LPC3250FET296/01,5 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of LPC3250FET296/01,5 chips? Including NXP original factory information, ARM Microcontrollers - MCU application, LPC3250FET296/01,5 pictures?
- You can use Jotrin's intelligent search engine, or filter by Processors and Microcontrollers ; Arm Microcontrollers ; General Purpose MCUs ; LPC3000 Arm9 category, or find it through NXP Semiconductor Information page.
- Q: Are the NXP's LPC3250FET296/01,5 price and stock displayed on the platform accurate?
- The NXP's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for LPC3250FET296/01,5, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement of LPC3250FET296/01,5?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the LPC3250FET29601,5 we delivered, we will accept the replacement or return of the LPC3250FET296/01,5 only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of LPC3250FET296/01,5.
(3)The LPC3250FET296/01,5 is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
- Q: How to contact us and get support, such as LPC3250FET296/01,5 datasheet pdf, LPC3250FET296 pin diagram?
- Need any After-Sales service, please feel free contact us: firstname.lastname@example.org
- 1.Motion sensing solution based on Wi-Fi technology
- 2.Logic family asserts to be fastest family of devices with the lowest power consumption
- 3.NXP Releases Plug’n Play NFC Solution for Linux and Android Developers
- 4.NXP’s New NFC Tag,which named NTAG 424 DNA make NFC Highest Security
- 5.NXP Semiconductors Bidirectional Voltage-Level Translators
- 6.NXP Launches Comprehensive RF Power Multi-Chip Module Portfolio
LPC2919FBD144/01 ARM9 microcontroller with CAN and LIN; Package: SOT486-1 (LQFP144); Co...
LPC3130FET180 MICROCONTROLLER MCU, 32 BIT, ARM9, 180MHZ, TFBGA-180; Architecture:ARM...
LPC3180FEL320 16/32-bit ARM microcontroller; hardware floating-point coprocessor, US...
LPC3131FET180 Low-cost, low-power ARM926EJ-S MCUs with high-speed USB 2.0 OTG, S...
LPC3240FET296 16/32-bit ARM microcontrollers; hardware floating-point coprocesso...
LPC3250FET296 16/32-bit ARM microcontrollers; hardware floating-point coprocesso...