Images are for reference only.
Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC
Request for Quotation
LPC2368FET100 Product Details
The LPC2368FET100 is a Arm7 microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 72 MHz.Features include up to 256 kB of flash memory, up to 58 kB of RAM, Ethernet MAC, USB Device/Host/OTG, DMA controller, SD/MMC, 4 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I2C, I2S, 8-channel 10-bit ADC, 10-bit DAC, 2 PWM, 4 general purpose timers, low power Real-Time Clock with separate battery supply, and up to 70 general purpose I/O pins. The LPC23xx are pin-compatible to the LPC176x Cortex-M3 series.
- Arm7TDMI-S™ processor, running at up to 72 MHz
- Up to 512 kB on-chip flash program memory with In-System Programming (ISP)
- 32 kB of SRAM on the Arm local bus for high performance CPU access
- 8 kB SRAM for general purpose DMA use also accessible by the USB
- 16 kB SRAM for Ethernet interface. Can also be used as general purpose SRAM
- Dual Advanced High-performance Bus (AHB) system
- Advanced Vectored Interrupt Controller (VIC)
- General Purpose DMA controller (GPDMA) on AHB
- Ethernet MAC with associated DMA controller
- Four UARTs with fractional baud rate generation
- USB 2.0 full-speed device with on-chip PHY
- CAN controller with two channels
- SPI controller
- Two SSP controllers, with FIFO and multi-protocol capabilities
- Three I2C-bus interfaces
- I2S (Inter-IC Sound) interface for digital audio input or output
- SD/MMC memory card interface
- 70 general purpose I/O pins with configurable pull-up/down resistors
- 10-bit ADC with input multiplexing among 6 pins
- 10-bit DAC
- Four general purpose timers/counters with a total of 8 capture inputs
- One PWM/timer block with support for three-phase motor control
- Real-Time Clock (RTC)
- 2 kB SRAM powered from the RTC power pin
- WatchDog Timer (WDT).
- Standard Arm test/debug interface for compatibility with existing tools
- Emulation trace module supports real-time trace
- Single 3.3 V power supply (3.0 V to 3.6 V)
- Four reduced power modes: idle, sleep, power-down, and deep power-down
- Four external interrupt inputs configurable as edge/level sensitive
- Processor wake-up from Power-down mode via any interrupt
- Two independent power domains allow fine tuning of power consumption
- Each peripheral has its own clock divider for further power saving
- Brownout detect with separate thresholds for interrupt and forced reset
- On-chip power-on reset
- On-chip crystal oscillator with an operating range of 1 MHz to 24 MHz
- 4 MHz internal RC oscillator trimmed to 1 % accuracy
- On-chip PLL
- Industrial control
- Medical systems
- Protocol converter
- Tape & Reel (TR)/Cut Tape (CT)/Tray/Tube
- RoHs Status
- Lead free / RoHS Compliant
LPC2368FET100 NXP Technical Data
LPC2368FET100 Related Products
Ratings and Reviews
- 0 / 5
- 5 Stars 0%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
Estimated Delivery Time: May 29 - Jun 03 days (choose Expedited at checkout).
Shipping & Payment
- Shipping Type
- Ship Fee
- Lead Time
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time：Shipping fee depend on different zone and country.
- Terms of payment
- Hand Fee
- Wire Transfer
- charge US$30.00 banking fee.
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step2: Vacuum Packaging
Step3: Anti-Static Bag
Step4: Individual Packaging
Step5: Packaging Boxes
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: How does Jotrin guarantee that LPC2368FET100 is the original manufacturer or agent of NXP?
- We have a professional business development department to strictly test and verify the qualifications of NXP original manufacturers and agents. All NXP suppliers must pass the qualification review before they can publish their LPC2368FET100 devices; we pay more attention to the channels and quality of LPC2368FET100 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of LPC2368FET100 chips? Including NXP original factory information, MIC application, LPC2368FET100 pictures?
- You can use Jotrin's intelligent search engine, or filter by Processors and Microcontrollers ; Arm Microcontrollers ; General Purpose MCUs ; LPC2000 Arm7 category, or find it through NXP Semiconductor Information page.
- Q: Are the NXP's LPC2368FET100 price and stock displayed on the platform accurate?
- The NXP's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for LPC2368FET100, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement of LPC2368FET100?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the LPC2368FET100 we delivered, we will accept the replacement or return of the LPC2368FET100 only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of LPC2368FET100.
(3)The LPC2368FET100 is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
- Q: How to contact us and get support, such as LPC2368FET100 datasheet pdf, LPC2368FET100 pin diagram?
- Need any After-Sales service, please feel free contact us: firstname.lastname@example.org
- 1.Motion sensing solution based on Wi-Fi technology
- 2.Logic family asserts to be fastest family of devices with the lowest power consumption
- 3.NXP Releases Plug’n Play NFC Solution for Linux and Android Developers
- 4.NXP’s New NFC Tag,which named NTAG 424 DNA make NFC Highest Security
- 5.NXP Semiconductors Bidirectional Voltage-Level Translators
- 6.NXP Launches Comprehensive RF Power Multi-Chip Module Portfolio
LPC2292FBD144/01 16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ...
LPC2294HBD144 16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ...
LPC2294HBD144/01 16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ...
LPC2361FBD100 Single-chip 16-bit/32-bit microcontrollers; up to 128 kB flash with IS...
LPC2365FBD100 Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with IS...
LPC2366FBD100 Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with IS...