ALL CATEGORIES
High Performance 3-axis Gyro for General Motion-Sensing Applications
| Manufacturer : | TDK InvenSense |
|---|---|
| Package/Case : | 16-QFN |
| Product Categories : | Integrated Circuits (ICs) |
| Datasheet: | ITG-1010 Datasheet (PDF) |
| RoHs Status: | Lead free / RoHS Compliant |
| Marking Code: | T36D C |
| In-stock: | 898 |
Quantity
Request for Quotation
ITG-1010 Product Details
Feature
Overview:
The ITG-1010 is a single-chip, digital output, 3 Axis MEMS gyroscope IC which features a 512-byte FIFO. The FIFO can lower the traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode. The gyroscope includes a programmable full-scale range of ±250, ±500, ±1000, and ±2000 degrees/sec, very low Rate noise at 0.01 dps/√Hz and extremely low power consumption at 3.2mA. Factory-calibrated initial sensitivity reduces production-line calibration requirements. Other industry-leading features include on-chip 16-bit ADCs, programmable digital filters, a precision clock with 1% drift from -40°C to 85°C, an embedded temperature sensor, and programmable interrupts. The device features I 2 C and SPI serial interfaces, a VDD operating range of 1.71 to 3.6V, and a separate digital IO supply, VDDIO from 1.71V to 3.6V. By leveraging its patented and volume-proven CMOS-MEMS fabrication platform, which integrates MEMS wafers with companion CMOS electronics through wafer-level bonding, InvenSense has driven the gyro package size down to a footprint and thickness of 3x3x0.9mm (16-pin QFN), to provide a very small yet high performance low cost package. The device provides high robustness by supporting 10,000g shock reliability.
Applications:
• Motion UI
• Handset gaming
• Location based services, points of interest, and dead reckoning
• Health and sports monitoring
• Power management
Features:
The ITG-1010 MEMS gyroscope includes a wide range of features:
Sensors:
• Monolithic X-, Y-, Z-Axis angular rate sensor (gyros) integrated circuit
• Digital-output temperature sensor
• External sync signal connected to the FSYNC pin supports image, video and GPS
synchronization
• Factory calibrated scale factor
• High cross-axis isolation via proprietary MEMS design
• 10,000g shock tolerant
Digital Output:
• The total data set obtained by the device includes gyroscope data, temperature data, and the one
bit external sync signal connected to the FSYNC pin.
• FIFO allows burst read, reduces serial bus traffic and saves power on the system processor.
• FIFO can be accessed through both I2
C and SPI interfaces.
• Programmable interrupt
• Programmable low-pass filters
Clocking:
• On-chip timing generator clock frequency ±1% drift over full temperature range
Power:
• VDD supply voltage range of 1.71V to 3.6V
• Flexible VDDIO reference voltage allows for multiple I2
C and SPI interface voltage levels
• Power consumption with three axes active: 3.2mA
• Sleep mode: 8μA
• Each axis can be individually powered down
Package:
• 3x3x0.9mm footprint and maximum thickness 16-pin QFN plastic package
• MEMS structure hermetically sealed at wafer level
• RoHS and Green compliant
(Picture: Pinout)
(Picture: Diagram)
Technical Parameters
- Product Lifecycle Status
- Not For New Designs
- Case/Package
- 16-VFQFN Exposed Pad
- RoHS
- Compliant
- Lead Free Status
- Lead Free
ITG-1010 Related Products
Ratings and Reviews (1)
- 5 / 5
- 5 Stars 100%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
-
**osep***2017-09-18
danke,alles bestens
- Payment:
- Shipping:
Shipping & Payment
Shipping
- Shipping Type
- Ship Fee
- Lead Time
- DHL
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- Fedex
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- UPS
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- TNT
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- EMS
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time：Shipping fee depend on different zone and country.
Payment
- Terms of payment
- Hand Fee
- Wire Transfer
- charge US$30.00 banking fee.
- Paypal
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
-
We have rich products, can meet your various needs.
-
Minimum order quantity starts from 1pcs.
-
Lowest international shipping fee starts from US$2.00.
-
90 days quality guarantee for all products.
Packing
-
Step1: Products
-
Step2: Vacuum Packaging
-
Step3: Anti-Static Bag
-
Step4: Individual Packaging
-
Step5: Packaging Boxes
-
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
Guarantees
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
FAQ:
- Q: How does Jotrin guarantee that ITG-1010 is the original manufacturer or agent of INVENSENSE?
- We have a professional business development department to strictly test and verify the qualifications of INVENSENSE original manufacturers and agents. All INVENSENSE suppliers must pass the qualification review before they can publish their ITG-1010 devices; we pay more attention to the channels and quality of ITG-1010 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of ITG-1010 chips? Including INVENSENSE original factory information, application, ITG-1010 pictures?
- You can use Jotrin's intelligent search engine, or filter by Integrated Circuits (ICs) category, or find it through TDK InvenSense Information page.
- Q: Are the INVENSENSE's ITG-1010 price and stock displayed on the platform accurate?
- The INVENSENSE's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for ITG-1010, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
-
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online. - Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
-
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days. - Q: What is the process for returns or replacement of ITG-1010?
-
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the ITG1010 we delivered, we will accept the replacement or return of the ITG-1010 only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of ITG-1010.
(3)The ITG-1010 is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy. - Q: How to contact us and get support, such as ITG-1010 datasheet pdf, ITG pin diagram?
- Need any After-Sales service, please feel free contact us: sales@jotrin.com
TDK InvenSense
-
ICG-20330 Optimized for Image Stabilization Applications with 3-axis of Compensa... -
ITG-3701 World's First Wide-Range 3-Axis MEMS Gyroscope for High-Speed Non-Impa... -
MPU-3300 MEMS Gyroscope, Digital, X, Y, Z, ±225°/s, ± 450°/s, 2.375 V, 3.465 V,... -
AT25SF041-SSHD-T NOR Flash Serial (SPI, Dual SPI, Quad SPI) 3.3V 4M-bit 512K x 8 8ns 8-... -
ATSAMC21G18A-AUT ARM Microcontrollers - MCU Cortex-M0+, 256KB FLASH,32KB SRAM - 48TQFP,... -
IS25LP128-JKLE NOR Flash Serial (SPI, Dual SPI, Quad SPI) 2.5V/3V/3.3V 128M-bit 16M x...
Certificates & Honor
