Digital Isolator CMOS 2-CH 25Mbps Automotive 8-Pin SOIC T/R
Request for Quotation
ISO7321CQDRQ1 Product Details
The ISO732x-Q1 family of devices provides galvanic isolation up to 3000 VRMS for 1 minute per UL 1577 and 4242 VPK per VDE V 0884-10. These devices have two isolated channels comprised of logic input and output buffers separated by silicon dioxide (SiO2) insulation barriers.
The ISO7320-Q1 has both channels in the same direction while ISO7321-Q1 has the two channels in opposite direction. In case of input power or signal loss, the default output isfor orderable part numbers with suffixandfor orderable part numbers without suffix . Seefor more information. Used in conjunction with isolated power supplies, these devices prevent noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry. The ISO732x-Q1 family of devices has integrated noise filters for harsh industrial environment where short noise pulses may be present at the device input pins. The ISO732x-Q1 family of devices has TTL input thresholds and operate from 3-V to 5.5-V supply levels.
Through innovative chip design and layout techniques, electromagnetic compatibility of the ISO732x-Q1 family of devices has been significantly enhanced to enable system-level ESD, EFT, Surge and Emissions compliance.For all available packages, see the orderable addendum at the end of the datasheet.
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
- Device HBM Classification Level 3A
- Device CDM Classification Level C6
- Signaling Rate: 25 Mbps
- Integrated Noise Filter on the Inputs
- Default OutputandOptions
- Low Power Consumption: Typical ICC per Channel at 1 Mbps:
- ISO7320-Q1: 1.2 mA (5-V Supplies),0.9 mA (3.3-V Supplies)
- ISO7321-Q1: 1.7 mA (5-V Supplies),1.2 mA (3.3-V Supplies)
- Low Propagation Delay: 33 nsTypical (5-V Supplies)
- 3.3-V and 5-V Level Translation
- 65-kV/μs Transient Immunity,Typical (5-V Supplies)
- Robust Electromagnetic Compatibility (EMC)
- System-level ESD, EFT, and Surge Immunity
- Low Emissions
- Isolation Barrier Life: > 25 Years
- Operates from 3.3-V and 5-V Supplies
- Narrow Body SOIC-8 Package
- Safety and Regulatory Approvals:
- 4242-VPK Isolation per DIN V VDE V 0884-10 and DIN EN 61010-1
- 3000-VRMS Isolation for 1 minute per UL 1577
- CSA Component Acceptance Notice 5A, IEC 60950-1 and IEC 61010-1 Standards
- Planned CQC Certification per GB4943.1-2011
All trademarks are the property of their respective owners.
- Power Dissipation
- Product Lifecycle Status
- 8-SOIC (0.154", 3.90mm Width)
- Lead Free Status
- Lead Free
- ECCN Code
ISO7321C Family Datasheet
ISO7321CQDRQ1 Related Products
Ratings and Reviews
- 0 / 5
- 5 Stars 0%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
Estimated Delivery Time: Jun 23 - Jun 28 days (choose Expedited at checkout).
Shipping & Payment
- Shipping Type
- Ship Fee
- Lead Time
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time：Shipping fee depend on different zone and country.
- Terms of payment
- Hand Fee
- Wire Transfer
- charge US$30.00 banking fee.
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step2: Vacuum Packaging
Step3: Anti-Static Bag
Step4: Individual Packaging
Step5: Packaging Boxes
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: How does Jotrin guarantee that ISO7321CQDRQ1 is the original manufacturer or agent of TI?
- We have a professional business development department to strictly test and verify the qualifications of TI original manufacturers and agents. All TI suppliers must pass the qualification review before they can publish their ISO7321CQDRQ1 devices; we pay more attention to the channels and quality of ISO7321CQDRQ1 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of ISO7321CQDRQ1 chips? Including TI original factory information, Interface Isolators application, ISO7321CQDRQ1 pictures?
- You can use Jotrin's intelligent search engine, or filter by Semiconductors ; Isolation ; Digital isolators category, or find it through Texas Instruments, Inc Information page.
- Q: Are the TI's ISO7321CQDRQ1 price and stock displayed on the platform accurate?
- The TI's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for ISO7321CQDRQ1, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement of ISO7321CQDRQ1?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the ISO7321CQDRQ1 we delivered, we will accept the replacement or return of the ISO7321CQDRQ1 only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of ISO7321CQDRQ1.
(3)The ISO7321CQDRQ1 is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
- Q: How to contact us and get support, such as ISO7321CQDRQ1 datasheet pdf, ISO7321C pin diagram?
- Need any After-Sales service, please feel free contact us: email@example.com
Texas Instruments, Inc
- 1.Introduction to Digital Signal Processor
- 2.How to use LM3886 DIY Gainclone power amplifier
- 3.Design of Software Phase-locking Based on DSP2812
- 4.The design of intelligent instrument based on DSP device TMS320C32 and CPLD chip
- 5.Design of audio signal acquisition system based on TMS320C6713
- 6.Gate Drivers and NexFET Power Blocks deliver 700 W of power
ISO7741FDBQR Digital Isolators High-Speed, Low-Power, Robust EMC Quad-Channel Digit...
ISO7762DBQ Digital Isolator, 6 Channel, 11 ns, 2.25 V, 5.5 V, SSOP, 16 Pins
ISO7740DBQR High-Speed, Low-Power, Robust EMC Quad-Channel Digital Isolator
ISO7740FDWR High-Speed, Low-Power, Robust EMC Quad-Channel Digital Isolator
ISO5852SDWR 5.7 kVrms Split O/P, Reinforced Isolated IGBT Gate Driver
ISO7760DBQR High Speed, Robust EMC Six-Channel Digital Isolators