IS42S16320D-7TL Product Details
• Clock frequency: 200, 166, 143 MHz
• Fully synchronous; all signals referenced to a positive clock edge
• Internal bank for hiding row access/precharge
• Power supply: Vdd/Vddq = 2.3V-3.6V
IS42/45SxxxxxD - Vdd/Vddq = 3.3V
IS42/45RxxxxxD - Vdd/Vddq = 2.5
• LVTTL interface
• Programmable burst length
– (1, 2, 4, 8, full page)
• Programmable burst sequence: Sequential/Interleave
• Auto Refresh (CBR) • Self Refresh
• 8K refresh cycles every 64 ms
• Random column address every clock cycle
• Programmable CAS latency (2, 3 clocks)
• Burst read/write and burst read/single write operations capability
• Burst termination by burst stop and precharge command
• Packages: x8/x16: 54-pin TSOP-II, 54-ball TF-BGA (x16 only) x32: 90-ball TF-BGA
• Temperature Range:
Commercial (0o C to +70o C)
Industrial (-40o C to +85o C)
Automotive, A1 (-40o C to +85o C)
Automotive, A2 (-40o C to +105o C)
The 512Mb SDRAM is a high speed CMOS, dynamic random-accessmemorydesignedtooperateineither3.3V Vdd/Vddq or 2.5V Vdd/Vddq memory systems, depending on the DRAM option. Internally configured as a quad-bank DRAM with a synchronous interface.
The 512Mb SDRAM (536,870,912 bits) includes an AUTO REFRESH MODE, and a power-saving, power-down mode. All signals are registered on the positive edge of the clock signal, CLK. All inputs and outputs are LVTTL compatible.
The 512Mb SDRAM has the ability to synchronously burst data at a high data rate with automatic column-address generation, the ability to interleave between internal banks to hide precharge time and the capability to randomly change column addresses on each clock cycle during burst access.
A self-timed row precharge initiated at the end of the burst sequenceisavailablewiththeAUTOPRECHARGEfunction enabled. Precharge one bank while accessing one of the other three banks will hide the precharge cycles and provide seamless, high-speed, random-access operation. SDRAM read and write accesses are burst oriented starting at a selected location and continuing for a programmed number of locations in a programmed sequence. The registration of an ACTIVE command begins accesses, followed by a READ or WRITE command. The ACTIVE command in conjunction with address bits registered are used to select the bank and row to be accessed (BA0, BA1 select the bank; A0-A12 select the row). The READ or WRITE commands in conjunction with address bits registered are used to select the starting column location for the burst access.
Programmable READ or WRITE burst lengths consist of 1, 2, 4 and 8 locations or full page, with a burst terminate option.
(Picture:Pinout / Diagram)
- Data Bus Width
- 16 bit
- 8 Mbit x 16
- Package / Case
- Memory Size
- 512 MB
- Maximum Clock Frequency
- 143 MHz
- Access Time
- 7 ns
- Supply Voltage Max
- 3 V
- Supply Voltage Min
- 3.6 V
- Maximum Operating Current
- 140 mA
- Maximum Operating Temperature
- + 70 C
- Mounting Style
- Factory Pack Quantity
IS42S16320D-7TL Related Products
Ratings and Reviews (1)
- 5 / 5
- 5 Stars 100%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
Received the product without any problem. Fast shipping and reasonable prices. I recommend this store.
Estimated Delivery Time: Sep 27 - Oct 02 days (choose Expedited at checkout).
Shipping & Payment
- Shipping Type
- Ship Fee
- Lead Time
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time：Shipping fee depend on different zone and country.
- Terms of payment
- Hand Fee
- Wire Transfer
- charge US$30.00 banking fee.
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step2: Vacuum Packaging
Step3: Anti-Static Bag
Step4: Individual Packaging
Step5: Packaging Boxes
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: How does Jotrin guarantee that IS42S16320D-7TL is the original manufacturer or agent of ISSI?
- We have a professional business development department to strictly test and verify the qualifications of ISSI original manufacturers and agents. All ISSI suppliers must pass the qualification review before they can publish their IS42S16320D-7TL devices; we pay more attention to the channels and quality of IS42S16320D-7TL products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of IS42S16320D-7TL chips? Including ISSI original factory information, DRAM application, IS42S16320D-7TL pictures?
- You can use Jotrin's intelligent search engine, or filter by DRAM category, or find it through Integrated Silicon Solution, Inc Information page.
- Q: Are the ISSI's IS42S16320D-7TL price and stock displayed on the platform accurate?
- The ISSI's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for IS42S16320D-7TL, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement of IS42S16320D-7TL?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the IS42S16320D7TL we delivered, we will accept the replacement or return of the IS42S16320D-7TL only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of IS42S16320D-7TL.
(3)The IS42S16320D-7TL is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
- Q: How to contact us and get support, such as IS42S16320D-7TL datasheet pdf, IS42S16320D pin diagram?
- Need any After-Sales service, please feel free contact us: email@example.com
Integrated Silicon Solution, Inc
IS42S16160G-6TLI SDRAM, 16M x 16bit, 5.4ns, Parallel Interface, TSOP-II-54
IS42S16160G-7TLI DRAM, 16M x 16bit, 7ns, LVTTL Interface, TSOP-II-54
IS42S16160G-7TL DRAM Chip SDRAM 256Mbit 16Mx16 3.3V 54-Pin TSOP-II
IS42S16320B-6TL DRAM Chip SDRAM 512Mbit 32Mx16 3.3V 54-Pin TSOP-II
IS42S16320B-7TL DRAM Chip SDRAM 512Mbit 32Mx16 3.3V 54-Pin TSOP-II
IS42S16320B-7TLI DRAM Chip SDRAM 512Mbit 32Mx16 3.3V 54-Pin TSOP-II