32-BIT, 200 MHz, RISC Embedded Processor
Request for Quotation
IBM25PPC405EP-3GB200C Product Details
Designed specifically to address embedded applications, the PowerPC 405EP (PPC405EP) provides a high-performance, low-power solution that interfaces to a wide range of peripherals by incorporating on-chip power management features and lower power dissipation requirements.
The PPC405EP incorporates two address maps. The first address map defines the possible use of addressable memory regions that the processor can access. The second address map defines Device Configuration Register (DCR) addresses (numbers). The DCRs are accessed by software running on the PPC405EP processor through the use of mtdcr and mfdcr instructions.
This chip contains a high-performance RISC processor core, SDRAM controller, PCI bus interface, Ethernet interface, control for external ROM and peripherals, DMA with scatter-gather support, serial ports, IIC interface, and generalpurpose I/O.
Technology: IBM CMOS SA-27E, 0.18 µm (0.11 µm Leff)
Package: 31mm, 385-ball, enhanced plastic ballgrid array (E-PBGA)
Power (typical): 1.2W at 200MHz
• IBM PowerPC 405 32-bit RISC processor core operating up to 333MHz with 16KB D- and Icaches
• PC-133 synchronous DRAM (SDRAM) interface
- 32-bit interface for non-ECC applications
• 4KB on-chip memory (OCM)
• External peripheral bus
- Flash ROM/Boot ROM interface
- Direct support for 8- or 16-bit SRAM and external peripherals
- Up to five devices
• DMA support for memory and UARTs.
- Scatter-gather chaining supported
- Four channels
• PCI Revision 2.2 compliant interface (32-bit, up to 66MHz)
- Asynchronous PCI Bus interface
- Internal or external PCI Bus Arbiter
• Two Ethernet 10/100Mbps (full-duplex) ports with media independent interface (MII)
• Programmable interrupt controller supports seven external and 19 internal edge-triggered or level-sensitive interrupts
• Programmable timers
• Software accessible event counters
• Two serial ports (16750 compatible UART)
• One IIC interface
• General purpose I/O (GPIO) available
• Supports JTAG for board level testing
• Internal processor local Bus (PLB) runs at SDRAM interface frequency
• Supports PowerPC processor boot from PCI memory
The PPC405EP embedded controller is available in a 31 millimeter, 385-ball E-PBGA package.
The ball (pin) number on which the signal appears. Multiplexed signals are shown with the default signal (following reset) not in brackets and the alternate signal in brackets. Multiplexed signals appear alphabetically multiple times in the list—once for each signal name on the ball. The page number listed gives the page in “Signal Functional Description” on page 33 where the signals in the indicated interface group begin.
|Manufacturer||IBM||RoHs Status||Lead free / RoHS Compliant|
|Packing||Tape & Reel (TR)/Cut Tape (CT)/Tray/Tube||Package/Case||BGA|
IBM25PPC405EP-3GB200C Related Products
Ratings and Reviews (1)
- 5 / 5
- 5 Stars 100%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
Nicely packaged fast delivery
Estimated Delivery Time: Dec 03 - Dec 08 days (choose Expedited at checkout).
Shipping & Payment
|Shipping Type||Ship Fee||Lead Time|
$20.00-$40.00 (0.50 KG)
$20.00-$40.00 (0.50 KG)
$20.00-$45.00 (0.50 KG)
$25.00-$65.00 (0.50 KG)
$25.00-$45.00 (0.50 KG)
|REGISTERED AIR MAIL||
$2.00-$3.00 (0.10 KG)
Processing Time：Shipping fee depend on different zone and country.
|Terms of payment||Hand Fee||Payment Site|
charge US$30.00 banking fee.
charge 4.0% service fee.
charge 3.5% service fee.
charge US$0.00 banking fee.
charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step6:bar-code shipping tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: What are the advantages of buying from Jotrin?
Jotrin is your second procurement department of the electronic components. The platform has supported by over 1000 original factories and authorized agents,
over 10 years of experience in the electronic components area.
Jotrin is aiming to help these manufacturers, EMS, PCBA clients offer a whole BOM solution with the assistant of their professional BOM team and Intelligent BOM software.
We can help you:
1. Do the cost down for your current regular orders.
2. Decrease your suppliers' management costs and suppliers' qty.
3. Improve your efficiency, we can offer the whole BOM one-stop supply chain service.
- Q: How can Jotrin guarantee to be the original manufacturers or the agents?
- We have a professional business development department to strictly examine and verify the qualifications of the original manufacturers and the agents. All the suppliers must pass the qualification examination before putting their materials on the shelves; We pay more attention to the channel and quality of products than any other customers, we are strict with supplier audit, you can rest assured that choice.
- Q: What are the business hours of Jotrin?
Although we accept quotation requests and orders anytime 24 hours a day regardless of business days and hours, we provide quotations and process orders during business time.
Business Hours: Monday - Friday 9:00am - 9:00pm (GMT+8)
- Q: Is the inventory and price seen on the platform accurate?
- Inventory fluidity big, unable to update in time, it will be updated periodically within 24 hours. After placing the order, it is suggested to confirm the order with the supplier or the online customer service of Jotrin before paying.
- Q: Can I place an order offline?
Yes. We accept offline orders.
You can contact our customer service representatives to help you customize your requirements.
If you'd like to submit your purchase orders via email, please send us a note to email@example.com. One of our customer service representatives will help you.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Western Union, Paypal, and Escrow is all acceptable.
- Q: How is the shipping arranged?
- Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail. No shipment handling charges be included.
- Q: How can I track my package?
- Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status of your order and its tracking number, if applicable. When the tracking numbers are present, you can click on the link and it will take you directly to the carriers' website so that you can track your order. Note: It may take up to 24 hours before carriers will display tracking information.
- Q: When can I receive my package？
- In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the product we delivered, we will accept the replacement or return of the product only when all of the below conditions are fulfilled:
(1)There are any problems with the product we delivered, such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of the product.
(3)The product is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy
- Q: How to contact us and get support?
- Need any After-Sales service, please feel free contact us: firstname.lastname@example.org
- 1. IBM 4Q Server Revenue Outpaces Overall 4Q Server Market Growth
- 2.IBM 1 in Worldwide Branded Tape Revenue for 2006
- 3.Chip Technology uses pulsed light for communications.
- 4.Nanotechnology Circuits enhance wireless device functionality.
IBM0165165BT3D-60 IBM, TSOP50
IAM-92516-BLK 400MHz - 3500MHz RF/MICROWAVE TRIPLE BALANCED MIXER, 6.9dB CONVERSION LOSS-MAX, 3 X 3MM, LEAD AND HALOGEN FREE, PLASTIC, LPCC-16
IAM82008 Silicon Bipolar MMIC 5 GHz Active Double Balanced Mixer/ IF Amp
IAM-81008 Silicon Bipolar MMIC 5 GHz Active Double Balanced Mixer/IF Amp
IAM-92516-TR1 Up/Down Conv Mixer 5V 3.5GHz 16Pin LPCC T/R
IAR-KICKSTART IAR Embedded Workbench Kickstart - Free IDE