Products > Integrated Circuits (ICs) > Active Filter > HMC1023LP5E
  • HMC1023LP5E
  • HMC1023LP5E 0
Images are for reference only.


Active Filter Dual Low Pass 6th Order 72MHz 32-Pin QFN EP T/R

Manufacturer :
Analog Devices, Inc
Package/Case :
Product Categories :
Tunable Filters ; Baseband Programmable VGA-Filters
RoHs Status:
Pb-free Halide free

Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.

HMC1023LP5E Product Details

The HMC1023LP5E is a 6th order, programmable bandwidth, fully calibrated, dual low pass filter. It features programmable 0 or 10 dB gain and supports arbitrary bandwidths from 5 MHz to 72 MHz. When calibrated, the bandwidth is accurate to +/-2.5%. Built-in filter bypass option enables wider bandwidths while maintaining programmed gain and common mode control settings.

Integrated ADC driver, programmable input impedance, and adjustable output common mode voltage from 0.9 V to 3 V with 2 Vppd signal, or lower than 0.9 V common mode with lower signal swing enables simple interface while achieving maximum performance. Programmable bias settings enable performance/power dissipation trade-off optimized for each application.

Filter calibration is accomplished with any reference clock rate from 20 to 80 MHz. One time programmable (OTP) memory offers unsurpassed flexibility allowing the user “set and forget” parameters like gain and bandwidth setting.

Housed in a compact 5x5 mm SMT QFN package, the HMC1023LP5E is pin and register compatible to the existing HMC900 programmable bandwidth Low Pass Filter. It requires minimal external components and provides a low cost alternative to more complicated switched discrete filter architectures.

The 6th order Butterworth transfer function delivers superior stop band rejection while maintaining both a flat passband and minimal group delay variation.


  • Low Noise Figure: 10 dB
  • High linearity:In-Band Output IP3 > +30 dBmIn-Band Output IP2 > +60 dBm
  • Pre-programmed and / or Programmable Bandwidth:5 MHz to 72 MHz. (Please see HMC1023LP5E Ordering Information)
  • Exceptional 3 dB Bandwidth Accuracy: ±2.5%
  • Programmable Gain: 0 or 10 dB
  • Integrated ADC Driver Amplifier
  • Automatic Filter Calibration
  • Externally Controlled Common Mode Output Level
  • Filter Bypass Option
  • Pin & Register Compatible to HMC900LP5E 
  • Read/Write Serial Port Interface (SPI)
  • 32 Lead 5x5 mm SMT Package 25 mm²


  • Baseband filtering before or after data converters for point-to-point fixed wireless and cellular infrastructure transceivers
  • Software defined radio applications
  • Anti-aliasing and reconstruction filters
  • Test and measurement equipment
  • ADC driver applications

HMC1023LP5E Block Diagram
(Picture: Diagram)

Technical Parameters

Frequency 100MHz Package / Case 32-VFQFN Exposed Pad
Bandwidth 72MHz Size / Dimension 0.197 L x 0.197 W (5.00mm x 5.00mm)
Filter Type Low Pass Height (Max) 0.039 (1.00mm)
Mounting Type Surface Mount

HMC1023LP5E Documents

  • HMC1023 Technical Documentation/Data sheet

HMC1023LP5E Related Products

Ratings and Reviews (0)

  • 0 / 5
  • 5 Stars 0%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
  • Ratings
  • Please rate the product!
Shipping More
Estimated Delivery Time: Sep 26 - Oct 01 days (choose Expedited at checkout).

Shipping & Payment


Shipping Type Ship Fee Lead Time

$20.00-$40.00 (0.50 KG)

2-5 days

$20.00-$40.00 (0.50 KG)

3-7 days

$20.00-$45.00 (0.50 KG)

2-5 days

$25.00-$65.00 (0.50 KG)

2-5 days

$25.00-$45.00 (0.50 KG)

5-14 days

$2.00-$3.00 (0.10 KG)

7-30 days

Processing Time:Shipping fee depend on different zone and country.


Terms of payment Hand Fee Payment Site
Wire Transfer

charge US$30.00 banking fee.


charge 4.0% service fee.
Credit Card

charge 3.5% service fee.

Western Union

charge US$0.00 banking fee.
Money Gram

charge US$0.00 banking fee.

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.


  • Step1:Product


  • Step2:Vacuum packaging

    Step2:Vacuum packaging

  • Step3:Anti-static bag

    Step3:Anti-static bag

  • Step4:Individual packaging

    Step4:Individual packaging

  • Step5:Packaging boxes

    Step5:Packaging boxes

  • Step6:bar-code shipping tag

    Step6:bar-code shipping tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.


1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.


Q: What are the advantages of buying from Jotrin?
Jotrin is your second procurement department of the electronic components. The platform has supported by over 1000 original factories and authorized agents, over 10 years of experience in the electronic components area. Jotrin is aiming to help these manufacturers, EMS, PCBA clients offer a whole BOM solution with the assistant of their professional BOM team and Intelligent BOM software. We can help you:
1. Do the cost down for your current regular orders.
2. Decrease your suppliers' management costs and suppliers' qty.
3. Improve your efficiency, we can offer the whole BOM one-stop supply chain service.
Q: How can Jotrin guarantee to be the original manufacturers or the agents?
We have a professional business development department to strictly examine and verify the qualifications of the original manufacturers and the agents. All the suppliers must pass the qualification examination before putting their materials on the shelves; We pay more attention to the channel and quality of products than any other customers, we are strict with supplier audit, you can rest assured that choice.
Q: What are the business hours of Jotrin?
Although we accept quotation requests and orders anytime 24 hours a day regardless of business days and hours, we provide quotations and process orders during business time.
Business Hours: Monday - Friday 9:00am - 9:00pm (GMT+8)
Q: Is the inventory and price seen on the platform accurate?
Inventory fluidity big, unable to update in time, it will be updated periodically within 24 hours. After placing the order, it is suggested to confirm the order with the supplier or the online customer service of Jotrin before paying.
Q: Can I place an order offline?
Yes. We accept offline orders.
You can contact our customer service representatives to help you customize your requirements.
If you'd like to submit your purchase orders via email, please send us a note to One of our customer service representatives will help you.
Q: What forms of payment can I use in Jotrin?
TT Bank, Western Union, Paypal, and Escrow is all acceptable.
Q: How is the shipping arranged?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail. No shipment handling charges be included.
Q: How can I track my package?
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status of your order and its tracking number, if applicable. When the tracking numbers are present, you can click on the link and it will take you directly to the carriers' website so that you can track your order. Note: It may take up to 24 hours before carriers will display tracking information.
Q: When can I receive my package?
In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the product we delivered, we will accept the replacement or return of the product only when all of the below conditions are fulfilled: (1)There are any problems with the product we delivered, such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of the product.
(3)The product is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy
Q: How to contact us and get support?
Need any After-Sales service, please feel free contact us:


Analog Devices, Inc. was founded by two MIT graduates, Ray Stata and Matthew Lorber in 1965. The same year, the company released its first product, the model 101 op amp, which was a hockey-puck sized...

Certificates & Honor

Certificates & Honor