Products > Integrated Circuits (ICs) > Memory > EN25Q32C-104HIP
  • EN25Q32C-104HIP

Images are for reference only.


32Mb Flash Memory

  • Package/Case :
  • SOP-8
  • Product Categories :
  • Memory
  • RoHs Status:
  • Lead free / RoHS Compliant
  • In-stock:
  • 15259


Request for Quotation

Warm Tips: Please fill out the below form and we will contact you as soon as possible.

EN25Q32C-104HIP Product Details


The EN25Q32C is a 32 Megabit (4,096 K-byte) Serial Flash memory, with enhanced write protection mechanisms. The EN25Q32C supports the standard Serial Peripheral Interface (SPI), and a high performance Dual/Quad output as well as Dual/Quad I/O using SPI pins: Serial Clock, Chip Select, Serial DQ0(DI), DQ1(DO), DQ2(WP#) and DQ3(NC). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual Output and 416MHz (104MHz x 4) for Quad Output when using the Dual/Quad I/O Fast Read instructions. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction. The EN25Q32C is designed to allow either single Sector/Block at a time or full chip erase operation. The EN25Q32C can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector or block. 


• Single power supply operation

- Full voltage range: 2.7-3.6 volt

• Serial Interface Architecture

- SPI Compatible: Mode 0 and Mode 3

• 32 M-bit Serial Flash

- 32 M-bit/4,096 K-byte/16,384 pages

- 256 bytes per programmable page

• Standard, Dual or Quad SPI

- Standard SPI: CLK, CS#, DI, DO, WP#

- Dual SPI: CLK, CS#, DQ0, DQ1, WP#

- Quad SPI: CLK, CS#, DQ0, DQ1, DQ2, DQ3

• High performance

- 104MHz clock rate for Standard SPI

- 104MHz clock rate for two data bits

- 104MHz clock rate for four data bits

• Low power consumption

- 10mA typical active current

- 1 μA typical power down current

• Uniform Sector Architecture:

- 1024 sectors of 4-Kbyte

- 128 blocks of 32-Kbyte

- 64 blocks of 64-Kbyte

- Any sector or block can be erased individually

• Software and Hardware Write Protection:

- Write Protect all or portion of memory via software

- Enable/Disable protection with WP# pin

• High performance program/erase speed

- Page program time: 0.6ms typical

- Sector erase time: 30ms typical

- 32KB Block erase time 100ms typical

- 64KB Block erase time 200ms typical

- Chip erase time: 12 seconds typical

• Lockable 512 byte OTP security sector

• Support Serial Flash Discoverable Parameters (SFDP) signature

• Read Unique ID Number

• Minimum 100K endurance cycle

• Package Options

- 8 pins SOP 200mil body width

- 16 pins SOP 300mil body width

- 8 contact VDFN (5x6mm)

- 8 pins PDIP

- All Pb-free packages are compliant RoHS, Halogen-Free and REACH.

• Industrial temperature Range

EN25Q32C-104HIP Pin Diagram
(Picture:Pinout / Diagram)

Technical Parameters

  • Manufacturer
  • ESMT
  • Packing
  • Tape & Reel (TR)/Cut Tape (CT)/Tray/Tube
  • RoHs Status
  • Lead free / RoHS Compliant
  • Package/Case
  • SOP-8

EN25Q32C-104HIP Related Products

Ratings and Reviews (1)

  • 5 / 5
  • 5 Stars 100%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
  • **RANC***

    Sehr gut schnelle geliefert

  • Ratings
  • Please rate the product!
Shipping More
Estimated Delivery Time: May 21 - May 26 days (choose Expedited at checkout).

Shipping & Payment


  • Shipping Type
  • Ship Fee
  • Lead Time
  • $20.00-$40.00 (0.50 KG)
  • 2-5 days
  • $20.00-$40.00 (0.50 KG)
  • 3-7 days
  • $20.00-$45.00 (0.50 KG)
  • 2-5 days
  • $25.00-$65.00 (0.50 KG)
  • 2-5 days
  • $25.00-$45.00 (0.50 KG)
  • 5-14 days
  • $2.00-$3.00 (0.10 KG)
  • 7-30 days

Processing Time:Shipping fee depend on different zone and country.


  • Terms of payment
  • Hand Fee
  • Payment Site
  • charge US$30.00 banking fee.
  • charge 4.0% service fee.
  • charge 3.5% service fee.
  • charge US$0.00 banking fee.
  • charge US$0.00 banking fee.

We provide high quality products, thoughtful service and after sale guarantee

  • We have rich products, can meet your various needs.

    We have rich products, can meet your various needs.

  • Minimum order quantity starts from 1pcs.

    Minimum order quantity starts from 1pcs.

  • Lowest international shipping fee starts from US$2.00.

    Lowest international shipping fee starts from US$2.00.

  • 90 days quality guarantee for all products.

    90 days quality guarantee for all products.


  • Step1:Product

    Step1: Products

  • Step2:Vacuum packaging

    Step2: Vacuum Packaging

  • Step3:Anti-static bag

    Step3: Anti-Static Bag

  • Step4:Individual packaging

    Step4: Individual Packaging

  • Step5:Packaging boxes

    Step5: Packaging Boxes

  • Step6:bar-code shipping tag

    Step6: Bar-Code Shipping Tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Jotrin ESD packing


1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.


Q: How does Jotrin guarantee that EN25Q32C-104HIP is the original manufacturer or agent of ESMT?
We have a professional business development department to strictly test and verify the qualifications of ESMT original manufacturers and agents. All ESMT suppliers must pass the qualification review before they can publish their EN25Q32C-104HIP devices; we pay more attention to the channels and quality of EN25Q32C-104HIP products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
Q: How to find the detailed information of EN25Q32C-104HIP chips? Including ESMT original factory information, application, EN25Q32C-104HIP pictures?
You can use Jotrin's intelligent search engine, or filter by Memory category, or find it through Elite Semiconductor Memory Technology Inc Information page.
Q: Are the ESMT's EN25Q32C-104HIP price and stock displayed on the platform accurate?
The ESMT's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for EN25Q32C-104HIP, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
Q: What forms of payment can I use in Jotrin?
TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement of EN25Q32C-104HIP?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the EN25Q32C104HIP we delivered, we will accept the replacement or return of the EN25Q32C-104HIP only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of EN25Q32C-104HIP.
(3)The EN25Q32C-104HIP is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
Q: How to contact us and get support, such as EN25Q32C-104HIP datasheet pdf, EN25Q32C pin diagram?
Need any After-Sales service, please feel free contact us:

Elite Semiconductor Memory Technology Inc

Since its inception, ESMT Technology has been working as a supplier of all types of memory products and technologies. Different from the main memory used in computer system applications, the DRAM products developed by the company are mainly type-specific memory, which can be widely used in PC perip...

Certificates & Honor

Certificates & Honor