2-Megabit 256K x 8 Single 2.7-Volt Battery-Voltage Flash Memory
Request for Quotation
AT49LV002-70TC Product Details
• Single Supply for Read and Write: 2.7V to 3.6 (BV), 3.0 to 3.6V (LV)
• Fast Read Access Time - 70 ns
• Internal Program Control and Timer
• Sector Architecture
– One 16K Byte Boot Block with Programming Lockout
– Two 8K Byte Parameter Blocks
– Two Main Memory Blocks (96K, 128K) Bytes
• Fast Erase Cycle Time - 10 seconds
• Byte By Byte Programming - 30 µs/Byte Typical
• Hardware Data Protection
• DATA Polling For End Of Program Detection
• Low Power Dissipation
– 25 mA Active Current
– 50 µA CMOS Standby Current
• Typical 10,000 Write Cycles
The AT49BV/LV002(N)(T) is a 3-volt-only in-system reprogrammable Flash Memory. Its 2 megabits of memory is organized as 262,144 words by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 70ns with power dissipation of just 90 mW over the commercial temperature range. When the device is deselected, the CMOS standby current is less than 50 µA. For the AT49BV/LV002N(T) pin 1 for the DIP and PLCC packages and pin 9 for the TSOP package are don’t connect pins.
To allow for simple in-system reprogrammability, the AT49BV/LV002(N)(T) does not require high input voltages for programming. Five-volt-only commands determine the read and programming operation of the device. Reading data out of the device is similar to reading from an EPROM; it has standard CE, OE, and WE inputs to avoid bus contention. Reprogramming the AT49BV/LV002(N)(T) is performed by erasing a block of data and then programming on a byte by byte basis. The byte programming time is a fast 50 µs. The end of a program cycle can be optionally detected by the DATA polling feature. Once the end of a byte program cycle has been detected, a new access for a read or program can begin. The typical number of program
and erase cycles is in excess of 10,000 cycles.
The device is erased by executing the erase command sequence; the device internally controls the erase operations. There are two 8K byte parameter block sections and two main memory blocks.
The device has the capability to protect the data in the boot block; this feature is enabled by a command sequence.
The 16K-byte boot block section includes a reprogramming lock out feature to provide data integrity. The boot sector is designed to contain user secure code, and when the feature is enabled, the boot sector is protected from being reprogrammed. In the AT49BV/LV002N(T), once the boot block programming lockout feature is enabled, the contents of the boot block are permanent and cannot be changed. In the AT49BV/LV002(T), once the boot block programming lockout feature is enabled, the contents of the boot block cannot be changed with input voltage levels of 5.5 volts or less.
- Tape & Reel (TR)/Cut Tape (CT)/Tray/Tube
- RoHs Status
- Lead free / RoHS Compliant
AT49LV002-70TC Related Products
Ratings and Reviews (1)
- 5 / 5
- 5 Stars 100%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
gut, schnell, preiswert. Danke, gern wieder!!
Estimated Delivery Time: Dec 14 - Dec 19 days (choose Expedited at checkout).
Shipping & Payment
- Shipping Type
- Ship Fee
- Lead Time
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time：Shipping fee depend on different zone and country.
- Terms of payment
- Hand Fee
- Wire Transfer
- charge US$30.00 banking fee.
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
We provide high quality products, thoughtful service and after sale guarantee
We have rich products, can meet your various needs.
Minimum order quantity starts from 1pcs.
Lowest international shipping fee starts from US$2.00.
90 days quality guarantee for all products.
Step2: Vacuum Packaging
Step3: Anti-Static Bag
Step4: Individual Packaging
Step5: Packaging Boxes
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.
1.We provide 90 days warranty.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
- Q: How does Jotrin guarantee that AT49LV002-70TC is the original manufacturer or agent of ATMEL?
- We have a professional business development department to strictly test and verify the qualifications of ATMEL original manufacturers and agents. All ATMEL suppliers must pass the qualification review before they can publish their AT49LV002-70TC devices; we pay more attention to the channels and quality of AT49LV002-70TC products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of AT49LV002-70TC chips? Including ATMEL original factory information, FLASH application, AT49LV002-70TC pictures?
- You can use Jotrin's intelligent search engine, or filter by FLASH category, or find it through ATMEL Corporation (Microchip Technology) Information page.
- Q: Are the ATMEL's AT49LV002-70TC price and stock displayed on the platform accurate?
- The ATMEL's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for AT49LV002-70TC, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
- Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
- Q: What is the process for returns or replacement of AT49LV002-70TC?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the AT49LV00270TC we delivered, we will accept the replacement or return of the AT49LV002-70TC only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of AT49LV002-70TC.
(3)The AT49LV002-70TC is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
- Q: How to contact us and get support, such as AT49LV002-70TC datasheet pdf, AT49LV002 pin diagram?
- Need any After-Sales service, please feel free contact us: email@example.com
ATMEL Corporation (Microchip Technology)
- 1.ATMEL Component naming conventions and IC packaging
- 2.SFF Ultra Low Power MCUs foster smart connectivity.
- 3.ARM-Based 32-Bit MCUs serve Internet of Things applications.
- 4.Wi-Fi SoCs target battery-powered IoT applications.
- 5.Microprocessor Units support 720p video playback.
- 6.ULP 32-Bit Microcontroller Platform powers IoT applications.
AT49F4096A-90TI Quadruple 2-Input Exclusive-OR Gates 14-SO -40 to 85,Flash 4M (256kx16...
AT49LV001 1-megabit (128K x 8) Single 2.7-volt Battery-Voltage Flash Memory
AT49LV001NT 1-megabit (128K x 8) Single 2.7-volt Battery-Voltage Flash Memory
AT49LV001-70JI 1-Megabit 128K x 8 Single 2.7-Volt Battery-Voltage Flash Memory
AT49LV001NT-70TI 1-Megabit 128K x 8 Single 2.7-Volt Battery-Voltage Flash Memory
AT49LV002 2-Megabit 256K x 8 Single 2.7-Volt Battery-Voltage Flash Memory