PRPAK(5x6)

Q:What defines the physical structure of PRPAK (5×6)?

A:Key features include:
- Leadless bottom-mounted pads: Ensures stable PCB attachment.
- Central thermal pad (4×4 mm coverage): Enhances heat dissipation.
- 30-pin layout with dual-row perimeter arrangement: Optimizes space efficiency.
- 0.8 mm ultra-thin profile: Ideal for compact designs.

Q:Why choose PRPAK (5×6) over alternatives?

A:Critical advantages:
- Miniaturization: 40% smaller than SOP-8 packages.
- Thermal Performance: Direct PCB heat path reduces junction temperature by 15%.
- Electrical Benefits: Low-inductance design (<0.5 nH) for high-frequency stability.
- Reliability: Moisture-resistant substrate (MSL3 certified).

Q:What are common technical specs?

A:Standard configurations (consult datasheets):
- Body Size: 5.0 × 6.0 mm
- Height: 0.8 mm
- Pin Pitch: 0.5 mm
- Material: Copper-alloy leads with Ni/Pd/Au plating
- Temp Range: -40°C to +125°C

Q:Where is PRPAK (5×6) typically applied?

A:Dominant use cases:
- Power Converters: Buck/boost ICs (e.g., TI TPS62130).
- RF Modules: Bluetooth/Wi-Fi transceivers (e.g., Nordic nRF52840).
- Sensor Interfaces: MEMS accelerometers (e.g., ST LIS2DH12).

Q:What are critical assembly guidelines?

A:Key recommendations:
- PCB Design: Thermal vias (4×4 array) under central pad.
- Solder Paste: Type 4 solder recommended for fine-pitch pins.
- Reflow Profile: Peak temp ≤ 245°C (Ramp rate: 2°C/sec).
- Inspection: X-ray (AXI) mandatory for void detection.