CDEP134

Q:What defines the physical structure of CDEP134?

A:Key features include:
- Leadless bottom-mounted pads for space-saving PCB attachment.
- Central thermal pad (80% coverage) for enhanced heat dissipation.
- 24-pin layout with dual-row perimeter arrangement for balanced signal distribution.
- 0.8 mm ultra-thin profile for compact designs.

Q:Why choose CDEP134 over alternatives?

A:Critical advantages:
- Miniaturization: 40% smaller than SOP-8 packages.
- Thermal Performance: Direct PCB heat path reduces junction temperature by 25%.
- Electrical Benefits: Low-inductance design (<1 nH) for high-frequency stability.
- Reliability: Moisture-resistant substrate (MSL3 certified).

Q:What are common technical specs?

A:Standard configurations (consult datasheets):
- Body Size: 4.0 × 4.0 mm
- Height: 0.8 mm
- Pin Pitch: 0.5 mm
- Material: Copper-alloy leads with Ni/Pd/Au plating
- Temp Range: -40°C to +125°C

Q:Where is CDEP134 typically applied?

A:Dominant use cases:
- Power Converters: Buck/boost ICs (e.g., TPS62130).
- RF Modules: Bluetooth/Wi-Fi transceivers (e.g., CC2652R).
- Sensor Interfaces: MEMS accelerometers (e.g., BMI160).

Q:What are critical assembly guidelines?

A:Key recommendations:
- PCB Design: 4×4 thermal vias array under the central pad (0.3 mm diameter).
- Solder Paste: Type 4 solder recommended for fine-pitch printing.
- Reflow Profile: Peak temp ≤ 245°C (Pb-free process).
- Inspection: X-ray (AXI) mandatory for void detection (<15% tolerance).