CB-5

Q:What defines the physical structure of CB-5?

A:Key features include:
- Leadless bottom-mounted pads for compact PCB integration.
- Central thermal pad (80% coverage) for enhanced heat dissipation.
- 32-pin layout with perimeter array for balanced signal distribution.
- 0.8 mm ultra-thin profile for space-constrained designs.

Q:Why choose CB-5 over alternatives?

A:Critical advantages:
- Miniaturization: 40% smaller than SOP-8 packages.
- Thermal Performance: Direct PCB heat path reduces junction temperature by 25%.
- Electrical Benefits: Low-inductance design (<1 nH) for high-frequency stability.
- Reliability: Moisture-resistant substrate (MSL3 certified).

Q:What are common technical specs?

A:Standard configurations (consult datasheets):
- Body Size: 5.0 × 5.0 mm
- Height: 0.8 mm
- Pin Pitch: 0.5 mm
- Material: Copper-alloy leads with Ni/Pd/Au plating
- Temp Range: -40°C to +125°C

Q:Where is CB-5 typically applied?

A:Dominant use cases:
- Power Converters: e.g., Buck/boost ICs (e.g., TPS62130).
- RF Modules: e.g., Bluetooth/Wi-Fi transceivers (e.g., CC2652R).
- Sensor Interfaces: e.g., MEMS accelerometers (e.g., LIS2DH12).

Q:What are critical assembly guidelines?

A:Key recommendations:
- PCB Design: 4×4 thermal vias under pad (0.3 mm diameter).
- Solder Paste: Type 4 solder recommended for fine-pitch reliability.
- Reflow Profile: Peak temp ≤ 245°C (Pb-free process).
- Inspection: X-ray (AXI) mandatory for void detection.