ALL CATEGORIES16-DIP (0.300, 7.62mm)
- Picture & Models
- Description
- Unite Price
- Quantity
- Operation
-
-
IC SMOKE DETECTOR CMOS 16DIP
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 430
-
-
DMOS Transistor Array to 16-Pin PDIP
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 2875
-
-
DMOS Transistor Array to 16-Pin PDIP
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 613
-
-
Linear ICs, DMOS Transistor Array
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 1113
-
-
Multiplexer/Demultiplexer 2 x 4:1 CMOS 8IN 16Pin DIP Tube
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 1833
-
-
Motor/Motion/Ignition Controllers & Drivers Stepping Motor Driver IC 80V 1.5A
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 5306
-
-
Gate Drivers DMOS Transistor Array 7-CH 50V 0.5A
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 3836
-
-
Replaced by XTR106 : 4-20mA Current Transmitter with Bridge Excitation And Linearization 16-PDIP
-
1 + 10 + 25 + 50 + >=100 -
1
-
-
IC MOTOR CNTRL ON/OFF 16DIP
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 252
-
-
IC ENHANCED INTERFACE SER 16-DIP
-
1 + 10 + 25 + 50 + >=100 -
1
-
-
Circuit Breaker Thermal 1Pole 30A 250VAC/50VDC 2Pin
-
1 + 10 + 25 + 50 + >=100 -
1
-
-
Switching Converters, Regulators & Controllers Switched Mode Power Supply 16-Pin
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 24000
-
-
Telecom Voice Conditioning ICs SIMPLE LOW VOLT. TRANS REVER
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 211
-
-
Multiplexer Single 8:1, 16-Pin PDIP
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 180
-
-
Multiplexer 1-Element CMOS 8-IN 16-Pin PDIP Magazine
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 145
-
-
Monostable Multivibrator Dual-Element -40C 85C 16-Pin PDIP Magazine
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 211
-
-
IC logic devices
-
1 + 10 + 25 + 50 + >=100 -
1
-
-
Sample & Hold Amplifiers OCTAL S/H WITH MUX INPUTS
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 3703
-
-
IC REG CTRLR MULT TOPOLOGY
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 60
-
-
HEATER CONTROLLER DIP-16
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 5505
-
-
5LED Ceramic Heating Controller
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 13
-
-
PIR CONTROLLER DIP-16
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 446
-
-
PIR CONTROLLER DIP-16
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 4020
-
-
Digital to Analog Converters - DAC 12-BIT SERIAL INPUT MULT
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 1500
-
-
IC SWITCH QUAD SPST 16DIP
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 4200
-
-
8051 N79 Microcontroller IC 8-Bit 12MHz 2KB (2K x 8) FLASH
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 700
-
-
8051 N79 Microcontroller IC 8-Bit 12MHz 2KB (2K x 8) FLASH
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 700
-
-
Counter ICs BINARY UP/DOWN COUNTER
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 20
-
-
Digital to Analogue Converter, 12 bit, Serial, 4.75V to 5.25V, DIP, 16 Pins
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 5000
-
-
Digital to Analog Converters - DAC 12-Bit 2Ch Precision DAC
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 5000
-
-
Digital to Analog Converters - DAC 12-Bit 2Ch Precision DAC
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 5000
-
-
Digital to Analog Converters - DAC 10-Bit Precision DAC
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 5000
-
-
DAC 1-CH R-2R 10-Bit 16-Pin PDIP N
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 5000
-
-
DAC 1-CH R-2R 10-Bit 16-Pin PDIP N
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 5000
-
-
Digital to Analog Converters - DAC 10-Bit Precision DAC
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 54000
-
-
DAC (D/A Converters) IC DAC 8BIT MULT
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 1000
-
-
Digital to Analogue Converter, 8 bit, Parallel, 5V to 15V, DIP, 16 Pins
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 2500
-
-
DAC 1-CH R-2R 8-Bit 16-Pin PDIP N
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 3538
-
-
Digital to Analog Converters - DAC 8-Bit Precision DAC
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 5000
-
-
CMOS, 14- and 12-Bit Multiplying DACs
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 5000
-
-
CMOS, 14- and 12-Bit Multiplying DACs
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 2904
-
-
CMOS, 14- and 12-Bit Multiplying DACs
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 5000
-
-
IC MCU 1.5K FLASH 16-DIP
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 5000
-
-
Other Analog Circuits
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 12530
-
-
Enhanced Product Digital Signal Processor 179-BGA MICROSTAR -55 to 125
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 6994
-
-
Autoswitching Power Mux 8-TSSOP -40 to 85
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 3570
-
-
Comparator ICs Quad Comparator / Reference
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 1000
-
-
10-Bit Bus Interface Flip-Flops With 3-State Outputs 24-CDIP -55 to 125
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 30665
-
-
Comparator ICs Quad Comparator / Reference
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 1000
-
-
Octal Bus Transceivers With 3-State Outputs 20-CDIP -55 to 125
-
1 + 10 + 25 + 50 + >=100 -
Minimum : 1 In-stock : 2500
-
Q:What defines the physical structure of 16-DIP (0.300", 7.62mm)?
A:Key features include:
- Standard through-hole design: Compatible with breadboards and PCBs.
- Dual-row pin layout: 16 pins arranged in two parallel rows (8 pins per row).
- Fixed pin spacing: 0.300" (7.62mm) row-to-row pitch and 0.100" (2.54mm) pin-to-pin spacing.
- Robust housing: Molded plastic body with copper-alloy leads for durability. -
Q:Why choose 16-DIP (0.300", 7.62mm) over alternatives?
A:Critical advantages:
- Ease of prototyping: Compatible with solderless breadboards and hand-soldering.
- Mechanical stability: Secure PCB mounting due to through-hole leads.
- Cost-effectiveness: Low-cost solution for low-to-medium complexity ICs.
- Repairability: Easy component replacement compared to surface-mount packages. -
Q:What are common technical specs?
A:Standard configurations (consult datasheets):
- Body Size: 20.3mm × 7.62mm (0.8" × 0.3").
- Height: 3.3mm (typical).
- Pin Pitch: 2.54mm (0.1") between pins; 7.62mm (0.3") between rows.
- Material: Plastic body with tin/lead or lead-free plated leads.
- Temp Range: -40°C to +85°C (industrial-grade variants available). -
Q:Where is 16-DIP (0.300", 7.62mm) typically applied?
A:Dominant use cases:
- Legacy electronics: Microcontrollers (e.g., ATmega328P in DIP).
- Educational kits: Arduino shields and prototyping boards.
- Industrial controls: Op-amps, logic ICs (e.g., 74HC series).
- Audio equipment: Analog signal processing circuits. -
Q:What are critical assembly guidelines?
A:Key recommendations:
- PCB Design: Use 0.9–1.0mm drilled holes for lead insertion.
- Soldering: Hand-solder with 60/40 or lead-free solder (270–320°C iron temperature).
- Cleaning: Remove flux residues to avoid long-term corrosion.
- Inspection: Visual checks for cold joints or bent pins.