Home > Manufacturers > Conta-Clip, Inc

Conta-Clip, Inc [ Conta-Clip ]

40 years of CONTA-CLIP (1978 - 2018)
40 years of developing and supplying reliable and innovative components in the fields of electrical and electronic connectivity and cable management systems.
Founded in 1978 and beeing in family hands from the very beginning: The CONTA-CLIP Group has since then been an owner-managed, globally active medium-sized company.
For 4 decades now, users have been relying on their extensive market and industry expertise, which has grown over many years. For 4 decades, employees have relied on their partnership-based approach to each other, appreciating the freedom to act independently and the esteem in which they find themselves.
In the years of their company's existence, they have developed from manufacturer to innovator. they consequently use their knowledge, experience and personal passion to create individual, successful solutions for their customers.
CONTA-CLIP stands out for its healthy growth, not least due to its financial strength with consistent re-investment in the group of companies, stable management and dimensional accuracy. their down-to-earth approach - a characteristic feature of East Westphalia, a region in northwestern Germany - has brought us a long way to go and will continue to determine their entrepreneurial actions in the future.
their strength in innovation is on display in 2016 with the design and production of their many new products. their consistent investment in new tooling and machine technologies is also an indicator of this innovative force.
In order to provide their customers and partners the highest level of satisfaction and benefits, they are presenting a new CONTA-CLIP product range.
The KDSClick cable entry system.
The customer benefits from the KDSClick system because it reduces installation times. KDSClick features IP66 protection and uses inlays to speed up configuration.
they also have the new PRK series of PushIn terminal blocks, with cross-sections ranging from 1.5 to 16 mm2. This series is equipped with an actuator that can be pushed down to disconnect the wire from the terminal.
their rate of trainees reached 10% in 2016, which is far above the national average. they enable young people to find a future career in six different trainee vocations.
The engine that drives us are their customers and consequently their products.
they document this on the basis of their rapidly growing product range: the new screw technology up to 120 mm2, the plug-in tension spring connection program, 
the steady expansion of the push-in technology, the new generation of stud terminals, the multifunctional I / O module of the GSM PRO-series: highlight in the field of electronics.
"CONTA-CLIP activity" is the slogan under which they are actively involved in the health and theyll-being of their employees. A variety of organized events on health and prevention should make their employees aware, that health is one of the most valuable assets they possess.
With the introduction of the new ERP system SAP in 2013, CONTA-CLIP secures it′s future, and sets the course for further company optimization.
Also in the year 2011 CONTA-CLIP shows environmental responsibility. A photovoltaic plant with a plant efficiency of 228,735 kWh is installed on the factory building roofs at the location H?velhof. The electricity produced can be used in large parts within the company.
After an economically turbulent 2009, CONTA-CLIP enters enthusiastically in 2010 with their full team of workers intact. their new line of screw-technology products is now being introduced on the market. they are moving forward with investments in their future in 2010 – such as modernized production facilities, ergonomic work stations and further training for their employees. In 2010 they are also concentrating on establishing new agencies abroad in order to increase their global outreach. 
The move into the new logistics centre at the location H?velhof was finalized successful.
Additional investments in modern manufacturing technologies were made.
As proof of their dedication to H?velhof and commitment to the future, CONTA-CLIP is investing in buildings and modern manufacturing technology for its H?velhof site.
Presentation of the new CONTA-CLIP fair concept at the most significant indusrial fair of the world in Hanover.
The question of company succession is resolved.
As a member of the executive board Mrs. Kla? re-enter the enterprise and takes a place in the strategic management
Presentation of complete series of the Pressure-Spring-Connection-System FRK of 1,5 mm2 to 4 mm2 on the Hanover Fair industry 2004
Presentation of the first Feed-Through terminals in the Pressure-Spring-Connection-System FRK system on the Hanover fair industry 2003
Acquisition of 15.000 m2 land in order to enlarge the production and stockroom area at the location in H?velhof.
The product spectrum includes more than 7,500 articles, that are mainly main at the headquarters in H?velhof and are used all over the world. CONTA-CLIP has 270 employees. 40 domestic and foreign representatives, as well as 4 subsidiaries make sure that their products are present all over the world. their products can be obtained on every continent.
Founding of a subsidiary in France
Founding of a subsidiary in the USA (CONTA-CLIP Inc.).
Founding of CONTA-CLIP Montagegesellschaft
First sales activities in South East Asia
Founding of subsidiaries in Italy (CONTA-CLIP s.r.l.) and the Netherlands (CONTA-CLIP Nederland B.V.).
Own production of electronic components
Start of sales in the USA 
New construction of administration, production areas and distribution storage in H?velhof, Germany.
Expansion of product spectrum to include series terminal types and the necessary accessories.
Expansion of existing production capacities.
The product series is exported for the first time.
Acquisition of a production hall in H?velhof, Germany!Construction and production of a first series terminal type RK 2,5-4.
Founding of CONTA-CLIP Verbindungstechnik GmbH
Conta-Clip Part Search :